Abstract:For the aspheric optical surface finished with a doughnut-shaped MCF (magnetic compound fluid) polishing tool, the performance of the polishing tool depends mainly on the properties of the MCF slurry. Therefore, under-standing the effect of each MCF slurry component on the polishing characteristics is crucial to developing novel polishing techniques. In this paper, the polishing principle was depicted and the corresponding polishing jig was constructed with a six-degree-of-freedom manipulator. The conical surfaces, which were considered as special aspheric surfaces, were experimentally polished under proper polishing conditions to examine the effects of the carbonyl iron particles (CIPs) concentration and the sizes of the abrasive particles (APs) on the polishing ability to remove material/tool marks and improve work surface qualities. Theoretical analyses were also performed to gain a more comprehensive understanding of the behaviors of CIPs and APs in the magnetic field. The results were shown as follows: (1) The CIPs concentration affected positively the magnetization of the MCF slurry, leading to better performance in the removal rate of material/tool marks when a higher CIPs concentration of was applied. The best surface quality was attained with a CIPs concentration of 45 wt%. (2) Larger APs were beneficial for obtaining higher removal rates of material/tool marks. The APs with 1 mu m in diameter were preferred for achieving a better surface quality. (3) Ferric clusters were formed along the magnetic line of force and their orientations changed periodically to stir the APs with the magnet revolution. (4) The Aps, at a given working gap, can squeeze the work-surface. The squeezing action was much more intense when larger APs and the MCF slurry with a higher magnetization were employed. (5) The material removal model suggested that the material was removed due to the APs and the relative motion between the work-surface and APs.

Research on the shear thickening polishing CaF 2 with textured hollow polishing tool

Simulation and experimental study of ultrasonic-assisted shear thickening polishing of cemented carbide

Preliminary Study of Disc Hydrodynamic Polishing

Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing

Ultra-precision machining process of inner surface considering shear-thickening polishing method

Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces

Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing

Shear-thickening polishing of inner raceway surface of bearing and suppression of edge effect

Modeling and experimenting of disc hydrodynamic polishing process for ultra-smooth surfaces

Fundamental Investigation on the Polishing Aspheric Elements with Doughnut-Shaped MCF Slurry

Fundamental research on aspheric surface polishing using doughnut-shaped MCF polishing tool

Technological parameter optimization and quality effects on solid-liquid phase abrasive flow polishing

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces

Effect of the Components of Magnetic Compound Fluid (MCF) Slurry on Polishing Characteristics in Aspheric-Surface Finishing with the Doughnut-Shaped MCF Tool

Controllable Flexible Surface Polishing

Fluid lubricated polishing based on shear thickening

Modeling and analysis for material removal and surface roughness in fluid jet polishing of optical glass

A novel process of chemical mechanical polishing for FV520B steel

Research on computer controlled ultra-precision polishing of freeform surfaces

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Investigation on Feasibility of Polishing Concave Surfaces Using Magnetic Compound Fluid Slurry.