Abstract:Towards the development of a novel polishing technique for the high-precision surface finishing of miniature V-grooves, the feasibility of finishing linear V-grooves generated on an oxygen-free copper substrate using a magnetic compound fluid (MCF) slurry was experimentally investigated, and the fundamental finishing characteristics were elucidated. First, a polishing apparatus was constructed by installing an MCF unit for generating a rotary magnetic field and rotating an MCF carrier onto a polisher, along with a wave maker used for vibrating the workpiece. Then, polishing experiments were performed to clarify the fundamental polishing characteristics, including the effects of the polishing time on the material removal, the form accuracy (i.e. the form retention rate and symmetry error), and the surface roughness at different polishing locations/positions in the polishing zone. Thereafter, the fundamental characteristics were examined by investigating the distribution of abrasive particles in the polishing zone, the relative velocity of abrasive particles compared to the V-groove, and the impact angle of abrasive particles against the V-groove side surface. Finally, the effect of the MCF carrier rotation speed n(c) on the characteristics was elucidated, and an appropriate value of n(c) was proposed. The main results can be summarized as follows. (1) At the majority of locations in the polishing zone, the surface quality Ra at higher positions on the V-grooves was better than that at lower ones. At locations where abrasive particles moved from the right/left side to left/right side of the grooves, the surface quality Ra on the right/left side was better than that at the left/right side. The final surface roughness after 150 min of polishing was in the range of 15-50 nm Ra, indicating that a mirror-like surface could be successfully achieved for a miniature V-groove using the proposed technique. (2) The V-groove form accuracy, i.e. form retention rate eta and symmetry error epsilon, deteriorated during polishing, and the final form accuracy differed with the location. Nevertheless, the nand 8 values at the location where the form accuracy was the lowest were greater than 99.47% and less than 0.17, respectively. (3) Increasing the MCF carrier rotational speed n(c) deteriorated the form accuracy but improved the surface quality Ra. Taking into account the balance between the form accuracy and surface quality Ra, nc should be set at 10 rpm under the experimental conditions in the current work. (C) 2016 Elsevier Inc. All rights reserved.

Fundamental Investigation on the Polishing Aspheric Elements with Doughnut-Shaped MCF Slurry

Fundamental research on aspheric surface polishing using doughnut-shaped MCF polishing tool

Investigation on the Polishing of Aspheric Surfaces with a Doughnut-Shaped Magnetic Compound Fluid (MCF) Tool Using an Industrial Robot

Effect of the Components of Magnetic Compound Fluid (MCF) Slurry on Polishing Characteristics in Aspheric-Surface Finishing with the Doughnut-Shaped MCF Tool

Experimental Study on the Polishing of Aspheric Surfaces on an S-136 Mould Steel Using Magnetic Compound Fluid Slurries

2206 Magnetic Field-Assisted Polishing of Miniature V-grooves Using MCF(Magnetic Compound Fluid) Slurry

Magnetic compound fluid polishing of aspheric workpiece under rotating magnetic field

Polishing Investigation on Zirconia Ceramics Using Magnetic Compound Fluid Slurry

Investigation on Feasibility of Polishing Concave Surfaces Using Magnetic Compound Fluid Slurry.

A novel magnetic field-assisted polishing method using magnetic compound slurry and its performance in mirror surface finishing of miniature V-grooves

Experimental Investigation on the Effect of Surface Shape and Orientation in Magnetic Field Assisted Mass Polishing

Effects of Alpha-Cellulose Supply on the Working Life of MCF Slurry in MCF Polishing

Nano-precision Polishing of CVD SiC Using MCF (magnetic Compound Fluid) Slurry

Achieving sub-nanometer roughness on aspheric optical mold by non-contact polishing using damping-clothed tool

C08 Study on Surface Polishing Process Using Magnetic Compound Fluid (MCF)

C04 High form accuracy polishing in 3D micro structure using MCF (magnetic compound fluid) assisted low frequency vibration

A New Polishing Process for Large-Aperture and High-Precision Aspheric Surface

Nano-Precision Polishing of Oxygen-Free Copper Using MCF (magnetic Compound Fluid) Slurry

Development of Ultrasonic Vibration-Assisted Magnetic Compound Fluid (MCF) Polishing Technology

Feasibility Study on Surface Finishing of Miniature V-grooves with Magnetic Compound Fluid Slurry

Fundamental Performance of Magnetic Compound Fluid (MCF) Polishing Tool in Metal Surface Finishing