Abstract:Off-line programming of the polishing tool trajectory for complex workpieces is challenging due to the nontrivial material removal model and the polishing accuracy requirement. Current tool trajectory planning methods are mainly developed for some simple surfaces but cannot handle the increasingly complicated industrial parts, such as the wheel hubs. This article first develops a numerical contact mechanics model for the point-sampled complex workpieces. The contact pressure distribution and the material removal depths on the workpiece point cloud can be predicted efficiently. A novel high-priority subregion searching algorithm is developed to track the most-worth-polishing workpiece points. By selecting the path pattern as direction-parallel, the path direction, tool dwell times, and the path spacings inside each extracted subregion are optimized to minimize the deviation from the desired material removal depths. The effectiveness of the proposed method is verified by performing disk polishing simulations on workpieces with different shapes. A robotic polishing experiment is also conducted on a wheel hub. Both simulation and experimental results show that reasonable tool trajectories can be generated on the workpiece, and the desired material removal depths can be achieved. Note to Practitioners—In robotic polishing industries, it is crucial to plan the tool trajectory (tool path and feed velocity) to achieve desired material removal depths on the workpiece surface, which means high surface quality. In this article, a model-based tool trajectory planning method for robotic polishing of complex surfaces that are represented by the point cloud form is presented. The advantage of using the point cloud is that workpiece surfaces with varying curvatures and complex features, e.g., grooves and holes, need not be expressed explicitly. The proposed method generates high-priority subregions according to the updated material removal distribution dynamically. In this work, the polishing path pattern is chosen as direction-parallel. Based on an efficient numerical contact mechanics and material removal model, the path locations and the tool dwell times inside each subregion are optimized to minimize the deviation between the actual and the desired material removal depths. When the desired material removal depths are attained in an extracted subregion, the algorithm finds the next high-priority subregion until the whole workpiece is well polished. The trajectory planning method can be integrated into an industrial robot with the force-control module. Future work is to integrate the roughness model into the tool trajectory planning method.

Sub-regional polishing and machining trajectory selection of complex surface based on K9 optical glass

Influences of polishing tool's shape on surface roughness in magneto-rheological finishing

Representation of Complex Optical Surfaces with Adaptive Radial Basis Functions

A Model-Based Trajectory Planning Method for Robotic Polishing of Complex Surfaces.

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces

Dwell Time Algorithm for Multi-Mode Optimization in Manufacturing Large Optical Mirrors

Optical Surface Generation in Ultra-Precision Polishing of Freeform

Modeling and prediction of generated local surface profile for ultrasonic vibration-assisted polishing of optical glass BK7

Research on computer controlled ultra-precision polishing of freeform surfaces

Tool path optimal design for slow tool servo turning of complex optical surface

Optimization of the Morphology of the Removal Function for Rotating Abrasive Water Jet Polishing

Curvature effect-based modeling and experimentation of the material removal in polishing optical surfaces using a flexible ball-end tool

Modeling and Experimental Verification of Time-Controlled Grinding Removal Function for Optical Components

Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

Mid-spatial frequency error restraint based on variable optimal angle-step trajectory strategy for the removal attenuation effect of magnetorheological finishing

Integration of Metrology in Grinding and Polishing Processes for Rotationally Symmetrical Aspherical Surfaces with Optimized Material Removal Functions

Surface profile prediction modeling of spiral toolpath for axial ultrasonic vibration-assisted polishing

Multi-tool optimization for computer controlled optical surfacing

Optimal strategy for fabrication of large aperture aspheric surfaces

Statistical perception of the chaotic fabrication error and the self-adaptive processing decision in ultra-precision optical polishing

B-spline Surface Approximation Method for Achieving Optimum Dwell Time in Deterministic Polishing