Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

A tri-modal aluminum based composite with super-high strength

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Towards Homogeneous Distribution of Coarse Grain in a Tri-Modal Al-based Composites Utilizing Localized Grain Growth

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design

Enhanced Strength and Ductility in Particulate-Reinforced Aluminum Matrix Composites Fabricated by Flake Powder Metallurgy

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets

On the Study of a TiB2 Nanoparticle Reinforced 7075al Composite with High Tensile Strength and Unprecedented Ductility

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Optimizing Heterostructure Parameters Towards Enhanced Toughening in Micro/nano-Reinforced Bimodal-Grained Al Alloy Composites

Synthesis of an (Al3BC + Al2O3)/Al composite with high stiffness and attractive high-temperature tensile properties

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite

Exceptional strength and wear resistance in an AA7075/TiB 2 composite fabricated via friction consolidation

Trimodal Grain Structured Aluminum Matrix Composites Regulated by Transitional Hetero-Domains

A strong, ductility maintained, and high-temperature resistant Ti-based composite with TiC@(TiCr 2 +α-Ti) reinforced particles

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Ultrahigh Strength - Ductility in Ti-6Al-4V Composites with High-Activity Graphene-Induced In-Situ TiC and Coherent Nanophases

Nacre-like Hybrid Aluminum-Matrix Composite with Simultaneously Enhanced Strength and Toughness

Superlightweight Nanoengineered Aluminum for Strength under Impact

A damage-tolerant hybrid aluminum composite reinforced with carbon nanotube and zirconia: study of strengthening mechanisms by combined experiments and molecular dynamics simulations