Abstract:Atmospheric-pressure plasma-enhanced spatial atomic layer deposition (PE-s-ALD) is considered a promising technique for high-throughput and low-temperature deposition of ultrathin films for applications where volume and costs are particularly relevant. The number of atmospheric-pressure PE-s-ALD processes developed so far is rather limited, and the fundamental aspects of their growth mechanisms are largely unexplored. This work presents a study of the atmospheric-pressure PE-s-ALD process of Al 2 O 3 using trimethylaluminum [TMA, Al(CH 3 ) 3 ] and Ar–O 2 plasma within the temperature range of 80–200 °C. Thin-film analysis revealed low impurity contents and a decreasing growth-per-cycle (GPC) with increasing temperature. The underlying chemistry of the process was studied with a combination of gas-phase infrared spectroscopy on the exhaust plasma gas and optical emission spectroscopy (OES) on the plasma zone. Among the chemical species formed in the plasma half-cycle, CO 2 , H 2 O, CH 4 , and CH 2 O were identified. The formation of these products confirms that the removal of CH 3 ligands during the plasma half-cycle occurs through two reaction pathways that have a different temperature dependences: (i) combustion reactions initiated by O 2 plasma species and leading to CO 2 and H 2 O formation and (ii) thermal ALD-like reactions initiated by the H 2 O molecules formed in pathway (i) and resulting in CH 4 production. With increasing temperature, the dehydroxylation of OH groups cause less TMA adsorption which leads to less CO 2 and H 2 O from the combustion reactions in the plasma step. At the same time, the higher reactivity of H 2 O at higher temperatures initiates more thermal ALD-like reactions, thus producing relatively more CH 4 . The CH 4 can also undergo further gas-phase reactions leading to the formation of CH 2 O as was theoretically predicted. Another observation is that O 3 , which is naturally produced in the atmospheric-pressure O 2 plasma, decomposes at higher temperatures mainly due to an increase of gas-phase collisions. In addition to the new insights into the growth mechanism of atmospheric-pressure PE-s-ALD of Al 2 O 3 , this work presents a method to study both the surface chemistry during spatial ALD to further extend our fundamental understanding of the method.

Substrate temperature-controlled precursor reaction mechanism of PEALD-deposited MoOx thin films

Ion bombardment effect on properties of MoO thin film under different PEALD plasma exposure time

Constructing Conductive MoOx Thin Films by Plasma Enhanced Atomic Layer Deposition

Metal-organic Chemical Vapor Deposition of Aluminium Oxynitride from Propylamine–dimethylaluminium Hydride and Oxygen: Growth Mode Dependence and Performance Optimization

Deposition Mechanism and Characterization of Plasma-Enhanced Atomic Layer-Deposited SnOx Films at Different Substrate Temperatures

Properties and Mechanism of PEALD-In2O3 Thin Films Prepared by Different Precursor Reaction Energy

Plasma Enhanced Atomic Layer Deposition of Molybdenum Oxide from Mo(CO)6 and O2 Plasma for 2D Electronic Device Application

Atomic layer deposition of crystalline molybdenum oxide thin films and phase control by post-deposition annealing

Temperature-dependent Optical Properties of Low-Loss Plasmonic SrMoO3 Thin Films

Effect of post-annealing on the properties of thermally evaporated molybdenum oxide films: Interdependence of work function and oxygen to molybdenum ratio

Study on the Deposition Characteristics of Molybdenum Thin Films Deposited by the Thermal Atomic Layer Deposition Method Using MoO2Cl2 as a Precursor

Temperature study of atmospheric-pressure plasma-enhanced spatial ALD of Al2O3 using infrared and optical emission spectroscopy

Studying the Atomic Layer Deposition of Molybdenum Oxide and Titanium–Molybdenum Oxide Films Using Quartz Crystal Microbalance

Atomic Layer Deposition and Post-Growth Thermal Annealing of Ultrathin MoO3 Layers on Silicon Substrates: Formation of Surface Nanostructures

Atomic Layer Deposition of Molybdenum and Tungsten Oxide Thin Films Using Heteroleptic Imido-Amidinato Precursors: Process Development, Film Characterization, and Gas Sensing Properties

Preparation and Characterization of Iron–molybdate Thin Films

Tuning of structural and optical properties of reactively sputtered MoOx films

Crystallinity Effect on Electrical Properties of PEALD–HfO2 Thin Films Prepared by Different Substrate Temperatures

Controllable preparation of monolayer MoO3/MoO by using plasma oxidation and atomic layer etching

Structural, optical and morphological evolution of Ga2O3/Al2O3 (0001) films grown at various temperatures by pulsed laser deposition