Abstract:Ternary Cu2SnS3 (CTS) is an attractive nontoxic and earth-abundant absorber material with suitable optoelectronic properties for cost-effective photoelectrochemical applications. Herein, we report the synthesis of high-quality CTS nanoparticles (NPs) using a low-cost facile hot injection route, which is a very simple and nontoxic synthesis method. The structural, morphological, optoelectronic, and photoelectrochemical (PEC) properties and heterojunction band alignment of the as-synthesized CTS NPs have been systematically characterized using various state-of-the-art experimental techniques and atomistic first-principles density functional theory (DFT) calculations. The phase-pure CTS NPs confirmed by X-ray diffraction (XRD) and Raman spectroscopy analyses have an optical band gap of 1.1 eV and exhibit a random distribution of uniform spherical particles with size of approximately 15-25 nm as determined from high-resolution transmission electron microscopy (HR-TEM) images. The CTS photocathode exhibits excellent photoelectrochemical properties with PCE of 0.55% (fill factor (FF) = 0.26 and open circuit voltage (Voc) = 0.54 V) and photocurrent density of -3.95 mA/cm2 under AM 1.5 illumination (100 mW/cm2). Additionally, the PEC activities of CdS and ZnS NPs are investigated as possible photoanodes to create a heterojunction with CTS to enhance the PEC activity. CdS is demonstrated to exhibit a higher current density than ZnS, indicating that it is a better photoanode material to form a heterojunction with CTS. Consistently, we predict a staggered type-II band alignment at the CTS/CdS interface with a small conduction band offset (CBO) of 0.08 eV compared to a straddling type-I band alignment at the CTS/ZnS interface with a CBO of 0.29 eV. The observed small CBO at the type-II band aligned CTS/CdS interface points to efficient charge carrier separation and transport across the interface, which are necessary to achieve enhanced PEC activity. The facile CTS synthesis, PEC measurements, and heterojunction band alignment results provide a promising approach for fabricating next-generation Cu-based light-absorbing materials for efficient photoelectrochemical applications.

Electrodeposition of Cu2NiSnS4 absorber layer on FTO substrate for solar cell applications

Electrodeposition of Cu2FeSnS4 thin films for solar cell applications: mechanism of deposition and influence of Fe2+ concentration

Electrodeposition mechanism of Cu 2 CoSnS 4 thin films onto FTO-coated glass: Effect of some additives

Synthesis and characterization of photoactive material Cu2NiSnS4 thin films

Structural, Optical and Magnetic Properties of Cu2NiSnS4 Thin Films Deposited by Facile One-Step Electrodeposition

Pulsed potential co-electrodeposition of Cu2CoSnS4 absorber layer on fluorinated tin oxide (FTO)-coated glass

Synthesis, Growth and Characterization of Cu2CoSnS4 Thin Films via Thermal Evaporation Method

In-Depth Study of Chemically Electrodeposited Cuprous Oxide (Cu2O) thin Films on ITO Glass

Synthesis of Cu2CoSnS4 chalcogenide thin films by spray pyrolysis and efficient Au/p-CCTS/n-SnO2 diode for cells solar applications

Investigation of nucleation and growth mechanism of Cu2ZnSnS4 absorber layer electrodeposition on Indium Tin Oxide coated glass

Electrochemical deposition of quaternary Cu<sub>2</sub>ZnSnS<sub>4</sub> thin films as potential solar cell material

Influence of deposition potential and substrate characteristics on the photovoltaic conversion efficiency of p-SnS absorbing layers

In situ solvothermal growth of Cu2ZnSnS4 thin film for counter electrode of dye-sensitized solar cells

Chemical Bath Deposition of SnS Nanosheet Thin Films for FTO/SnS/CdS/Pt Photocathode

Low cost oxide-based deposition of Cu2FeSnS4 thin films for photovoltaic absorbers

Electrochemical Deposition of Quaternary Cu 2 ZnSnS 4 Thin Films As Potential Solar Cell Material

Synthesis and characterization of CZTS and Cu2-xAgxZnSnS4 thin films for the application of solar cells

Deposition of nano-crystalline Cu2ZnSnS4 thin film in one step without sulfurization: Future prospects

Fabrication of Cu2SnS3 Thin Films by Ethanol-Ammonium Solution Process by Doctor-Blade Technique

Ternary Cu2SnS3: Synthesis, Structure, Photoelectrochemical Activity, and Heterojunction Band Offset and Alignment

Fabrication of Cu 2 SnS 3 thin-film solar cells with oxide precursor by pulsed laser deposition