Abstract:The development of efficient materials and methods for the elimination of heavy metals contamination from water bodies is increasingly demanded as these toxic cations can acute diseases to humans or make serious threat to the environment. The aim of this research is to evaluate the effectiveness of the organosilane coupling agent for the modification of hydrous manganese oxide and the application of the functionalized nanoadsorbent for the removal of nickel and copper ions from synthetic wastewater samples. The synthesized thiol-functionalized hydrous manganese oxide was characterized in terms of their morphology, surface area, functional groups, surface elemental compositions, and the structural properties. In the adsorption process of Ni(II) and Cu(II), the effective parameters including the initial metal cation concentration (20–150 mg/L), operation temperature (298–318 K), and the contact time at the optimum pH were investigated. The uptake of Ni(II) and Cu(II) ions on the prepared adsorbents followed by the Freundlich isotherm model reveals the heterogeneous adsorption, with the adsorption capacities of 24.96 mg/g and 31.2 mg/g for the modified adsorbent and 23.92 mg/g and 29.6 mg/g for the virgin adsorbent, respectively. Based on the results, both the virgin and the functionalized adsorbents exhibited high affinity to copper ions than nickel in the single-component system. Kinetic experiments of both metal ions clarified that the experimental data was well predicted by pseudo-second-order model and the equilibrium was achieved after 10 min of contact time. Additionally, the incorporation of the as-prepared adsorbents in the electrospun nanofibers membrane matrix showed the promising potential for the removal of metal cations. The nickel and copper removal efficiency by the membranes containing 1.5 wt% of the modified adsorbent was 80% and 89%, respectively which implying that the modified adsorbent could be employed more efficiently in other treatment techniques for the removal of metallic pollutants. The modification of hydrous manganese oxide by the functional mercaptosilane increases the adsorption sites for trapping the metal ions and improves the adsorption capacity, making high capability for the removal of metal ions from the effluent.

Multi-ligand strategy for enhanced removal of heavy metal ions by thiol-functionalized defective Zr-MOFs

Surface defects enhance the adsorption affinity and selectivity of Mg(OH)2 towards As(v) and Cr(vi) oxyanions: a combined theoretical and experimental study

Development of mercaptosuccinic anchored MOF through one-step preparation to enhance adsorption capacity and selectivity for Hg(II) and Pb(II)

Thiol/nitrogen functionalized Fe3O4@ZIF-8-DMTD by one-pot post coordination modulation for efficient and rapid removal of trace heavy metals from drinking water

Efficient removal of heavy metal ions from wastewater and fixation of heavy metals in soil by manganese dioxide nanosorbents with tailored hollow mesoporous structure

Preparation of a Novel Zn(II)-Imidazole Framework as an Efficient and Regenerative Adsorbent for Pb, Hg, and As Ion Removal From Water

New strategy to enhance heavy metal ions removal from synthetic wastewater by mercapto-functionalized hydrous manganese oxide via adsorption and membrane separation

Defective SO 3 H-MIL-101(Cr) for capturing different cationic metal ions: Performances and mechanisms

Enhanced removal of As(iii) by manganese-doped defective UiO-66 coupled peroxymonosulfate: multiple reactive oxygen species and system stability

Facile fabrication of Fe/Zr binary MOFs for arsenic removal in water: High capacity, fast kinetics and good reusability

Use of Hydrous Manganese Dioxide As a Potential Sorbent for Selective Removal of Lead, Cadmium, and Zinc Ions from Water.

A Novel Post Coordination Modulation Method to Synthesize N/S Functionalized ZIF-8 for Removal of Trace Heavy Metals from Drinking Water

Enhanced arsenite removal from water using zirconium-ferrocene MOFs coupled with peroxymonosulfate:oxidation and multi-sites adsorption mechanism

Efficient removal of heavy metals using 1,3,5-benzenetricarboxylic acid-modified Zirconium-based organic frameworks

MoS 4 2- Intercalated Magnetic Layered Double Hydroxides for Effective Removal and Expedient Recovery of Heavy Metals from Soil

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

Mechanistic insight into selective adsorption and easy regeneration of carboxyl-functionalized MOFs towards heavy metals

New insight into the co-removal of arsenic and cadmium from wastewater by using thiol-functionalized UiO-66: A mechanistic study and real water test

Tailored Zeolitic Imidazolate Framework (TSC‐ZIF) for water purification: Evaluating TSC‐ZIF affinity towards heavy metal ions in multi‐metal solutions

Amorphous molybdenum sulfide mediated EDTA with multiple active sites to boost heavy metal ions removal

Highly Efficient and Selective Hg(II) Removal from Water by Thiol-Functionalized MOF-808: Kinetic and Mechanism Study