Development of mercaptosuccinic anchored MOF through one-step preparation to enhance adsorption capacity and selectivity for Hg(II) and Pb(II)

Chen Wang,Guo Lin,Yunhao Xi,Xiteng Li,Zhen Huang,Shixing Wang,Jiling Zhao,Libo Zhang

DOI: https://doi.org/10.1016/j.molliq.2020.113896

IF: 6

2020-11-01

Journal of Molecular Liquids

Abstract:<p>A novel Zr-MOF adsorbent was synthesized by one-step method and was used to selectively adsorb Hg(II) and Pb(II) from wastewater. The adsorbent can reduce the concentration of mercury and lead to less than the national standard (Hg is 50 μg/L and Pb is 1 mg/L). The entire adsorption process conforms to the pseudo second-order kinetic and Hill isotherm models. At pH 4, the adsorbent removed more than 90% of mercury (to 22 μg/L) and lead (to 0.732 mg/L) in 10 min and 960 min, and the maximum adsorption capacity was 1080 mg/g and 510 mg/g, respectively. In addition, the practical application in wastewater proved that the adsorbent can selectively adsorb Hg(II) and Pb(II) from the mixed ion solution and it still meets national standards for wastewater discharge. The research of repeated experiments proves that the adsorbent can be used repeatedly. The adsorption mechanism was clarified by FTIR, XPS spectroscopy before and after adsorption, and density functional theory (DFT) calculation. In summary, the adsorbent is stable in aqueous solution and has great potential for the efficient removal of trace heavy metal ions (mercury and lead) in future treatment of wastewater.</p>

chemistry, physical,physics, atomic, molecular & chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a new type of adsorbent for the efficient removal of mercury (Hg(II)) and lead (Pb(II)) in wastewater. Specifically, the research aims to synthesize a mercaptosuccinic acid - anchored metal - organic framework material (MOF - MA) through a one - step method to enhance the adsorption capacity and selectivity for Hg(II) and Pb(II). The following are the main problems and objectives of the paper:

1. **Improve adsorption performance**: Traditional adsorbents have difficulty reducing high - concentration heavy metals to ultra - low concentrations. This study hopes to develop new adsorption materials to more effectively reduce the concentrations of Hg(II) and Pb(II) in water bodies to meet national emission standards (50 μg/L for mercury and 1 mg/L for lead).

2. **Simplify synthesis steps**: Compared with post - modification methods, one - step preparation can reduce synthesis steps and economic costs, and at the same time reduce the harm of organic reagents to the environment during synthesis and adsorption processes.

3. **Achieve high selectivity and reusability**: The research also hopes to verify the selective adsorption ability of the new adsorbent in mixed - ion solutions, and evaluate its application effect in actual wastewater treatment and its reusable characteristics.

4. **Reveal the adsorption mechanism**: Through FTIR, XPS spectral analysis and density functional theory (DFT) calculations, clarify the interaction mechanism between the adsorbent and Hg(II) and Pb(II).

### Research background
Heavy metals such as mercury (Hg(II)) and lead (Pb(II)) are highly toxic, especially mercury, which has significant bio - accumulativity. These toxic ions not only threaten natural ecosystems but also seriously affect human health. Therefore, it is crucial to develop efficient removal technologies. Common removal technologies include ion exchange, membrane separation, chemical precipitation and adsorption, etc. Among them, the adsorption technology has attracted much attention because of its simplicity, high efficiency and low cost.

### Solution
The researchers selected a zirconium - based metal - organic framework (Zr - MOF) and modified it with mercaptosuccinic acid as a ligand. Mercaptosuccinic acid contains two carboxyl groups, which can form stable coordination bonds with zirconium, and is rich in S - H bonds, which can selectively capture heavy metal ions. By preparing this adsorbent through a one - step method, the synthesis steps are reduced and the adsorption efficiency is improved.

### Main results
- **High adsorption capacity**: The maximum adsorption capacities of MOF - MA for Hg(II) and Pb(II) reached 1080 mg/g and 510 mg/g respectively.
- **Rapid adsorption**: Under the condition of pH 4, MOF - MA can remove more than 99% of Hg(II) within 10 minutes and reach the adsorption equilibrium of Pb(II) within 960 minutes.
- **Good selectivity and reusability**: MOF - MA can still effectively remove Hg(II) and Pb(II) in actual wastewater, and still maintain a high removal rate after multiple cycles.

In conclusion, this study has successfully developed a new type of MOF adsorbent, which has great potential for efficiently removing toxic heavy metals in wastewater.