Abstract:Ascribing to their significant differences in physicochemical properties, it is extremely challenging to treat complex wastewater containing more than one class of pollutants via one-step treatment. Here, we focused on disposal of complex wastewater bearing organic dye and heavy metal by using adsorptive method. Thus, we successfully fabricated a novel and versatile EDTA functionalized magnetic chitosan composite adsorbent (Fe3O4-CS/EDTA) for simultaneous removal of methyl blue(MB) and heavy metal (Pb(II) and Cu(II)) from complex wastewater. In this setting, EDTA chelating groups are mainly responsible for the binding of heavy metals, while the protonated amino groups of CS adsorb anionic dyes through electrostatic interaction, thus enabling the simultaneous capture of these two classes of pollutants. In monopollutant system, the resulting material showed prominent uptake ability toward MB, Pb(II), and Cu(II) with uptake characteristics of pseudo-second-order model and Langmuir isotherm equation. The maximum monolayer uptake capacities were determined to be 225.0 mg g(-1) of Cu(II), 220.0 mg g(-1) of Pb(II), and 459.9 mg g(-1) of MB at 303 K, respectively. More interestingly, in metal-MB binary system, uptake of MB was almost not affected by coexisting metal. While the uptake capacity of Cu(II) or Pb(II) was enhanced with increasing of MB concentration. These results demonstrated the synergetic removal performance of as-designed adsorbent toward cationic metal ions and anionic dye. Moreover, as-resulting adsorbent showed no significant adsorption capacity loss even after 8 runs of sorption-desorption cycle, manifesting that it is of great stability and could be regarded as a promising candidate adsorbent for treating complex wastewater. This study provides some insights into the design of highly efficient adsorbents with spatially separated sorption sites for disposing complex wastewater bearing organic and metallic contaminants.

Amorphous molybdenum sulfide mediated EDTA with multiple active sites to boost heavy metal ions removal

Facile immobilization of ethylenediamine tetramethylene-phosphonic acid into UiO-66 for toxic divalent heavy metal ions removal: An experimental and theoretical exploration

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Multifunctional Nanocomposites Fe 3 O 4 @sio 2 -EDTA for Pb(II) and Cu(II) Removal from Aqueous Solutions

Study on the Mechanism of Removing Pb (II) and Cd (II) from Industrial Wastewater by Copper Based MOF Modified with Ethylenediamine

Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption

Engineering Anion Resin Based Amorphous Molybdenum Sulphide Composite for Treatment of Authentic Acid Mine Drainage

Alkynyl functionalized MoS2 mesoporous materials with superb adsorptivity for heavy metal ions

Adsorption performance and physicochemical mechanism of MnO2-polyethylenimine-tannic acid composites for the removal of Cu(II) and Cr(VI) from aqueous solution

EDTA Modified Hollow Microporous Organic Nanospheres for Enhancing Adsorption of Metal Ions

A Magnetically Recyclable Chitosan Composite Adsorbent Functionalized with EDTA for Simultaneous Capture of Anionic Dye and Heavy Metals in Complex Wastewater

Molybdenum Sulphide Modified Chelating Resin for Toxic Metal Adsorption from Acid Mine Wastewater

Simultaneous and Efficient Removal of Multiple Heavy Metal(loid)s from Aqueous Solutions Using Fe/Mn (hydr)oxide and Phosphate Mineral Composites Synthesized by Regulating the Proportion of Fe(II), Fe(III), Mn(II) and PO43.

Green rust-deposited MoS2 composites for the enhanced sequestration of EDTA-chelated Cu(II) from an aqueous solution

Use of Hydrous Manganese Dioxide As a Potential Sorbent for Selective Removal of Lead, Cadmium, and Zinc Ions from Water.

Fe-MoS4: an Effective and Stable LDH-Based Adsorbent for Selective Removal of Heavy Metals

Intensively Competitive Adsorption for Heavy Metal Ions by PAMAM-SBA-15 and EDTA-PAMAM-SBA-15 Inorganic–organic Hybrid Materials

Alkaline earth metal modulation of MoS 2 crystalline phases for desolvation and selective adsorption of hydrated lead ions

Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism

Functionalized Metal-Organic Framework UIO-66 Nanocomposites with Ultra-High Stability for Efficient Adsorption of Heavy Metals: Kinetics, Thermodynamics, and Isothermal Adsorption

Synergistic adsorption removal of heavy metal oxoanions and cations from aqueous solution by a polyacrylate-coated ferrous sulfide and layered double hydroxide nanocomposite