Community pharmacy residency program: a contemporary perspective.

J. Stewart,T. Covington,R. Davis,R. Roberts

DOI: https://doi.org/10.1016/S0160-3450(16)32879-3

1985-11-01

American Pharmacy

Abstract:

What problem does this paper attempt to address?

Right-to-left shunt and neurological decompression sickness in divers

P. Wilmshurst

DOI: https://doi.org/10.1016/0140-6736(90)92546-T

IF: 202.731

1990-10-27

The Lancet

Abstract:
Design of Composite Cathodes for Sulfide-Based All-Solid-state Batteries

Wei Jiang,Xinxin Zhu,Yawen Liu,Shu Zhao,Min Ling,Liguang Wang,Chengdu Liang

DOI: https://doi.org/10.1016/j.etran.2023.100246

IF: 11.9

2023-01-01

eTransportation

Abstract:Sulfide-based all-solid-state batteries have been assumed as one of the most promising future battery systems. However, a complementary design philosophy, i.e., ionic/electronic kinetics in solid state, chemomechanical failures and (electro-)chemical compatibility, is still missing. This perspective summarizes the vital factors related to the composite cathode design in terms of ionic/electronic transport networks, chemomechanical properties, and (electro-)chemical compatibility. The fundamental principles underlying electrode design are also included and emphasized. Based on previous studies, we propose the methodology to understand these phenomena for constructing composite cathodes in depth to guide the design of advanced all-solid-state batteries.
Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

Xinxin Zhu,Wei Jiang,Shu Zhao,Renzhi Huang,Min Ling,Chengdu Liang,Liguang Wang

DOI: https://doi.org/10.1016/j.nanoen.2022.107093

IF: 17.6

2022-01-01

Nano Energy

Abstract:The design of composite sulfur cathode plays a critical role in determining the physical and (electro)chemical properties of all-solid-state lithium-sulfur batteries (ASSLSBs) owing to the intrinsic electrochemical inertia of sulfur. However, the composition especially the selection of solid-state electrolyte in the composite sulfur cathode to boost the electrochemical performance is barely studied. Herein, by comparing three typical sulfide solid-state electrolytes, we reveal the excellent compatibility between the sulfide electrolyte (Li7P(3)S(11)) and the sulfur cathode. The ASSLSBs based on Li7P(3)S(11) electrolytes demonstrate fast reaction kinetics and high electrochemical stability, which can contribute to (electro)chemical congruency. Further physical and chemical characterizations of the composite sulfur cathode confirm the excellent compatibility between sulfur and the Li7P(3)S(11) electrolytes. These findings provide guidance for developing advanced solid-state electrolytes for highenergy-density ASSLSBs.
Enhanced Sulfur Transformation by Multifunctional FeS2/FeS/S Composites for High‐Volumetric Capacity Cathodes in Lithium–Sulfur Batteries

Kai Xi,Deqing He,Chris Harris,Yuankun Wang,Chao Lai,Huanglong Li,Paul R. Coxon,Shujiang Ding,Chao Wang,Ramachandran Vasant Kumar

DOI: https://doi.org/10.1002/advs.201800815

IF: 15.1

2019-01-01

Advanced Science

Abstract:Lithium-sulfur batteries are currently being explored as promising advanced energy storage systems due to the high theoretical specific capacity of sulfur. However, achieving a scalable synthesis for the sulfur electrode material whilst maintaining a high volumetric energy density remains a serious challenge. Here, a continuous ball-milling route is devised for synthesizing multifunctional FeS2/FeS/S composites for use as high tap density electrodes. These composites demonstrate a maximum reversible capacity of 1044.7 mAh g(-1) and a peak volumetric capacity of 2131.1 Ah L-1 after 30 cycles. The binding direction is also considered here for the first time between dissolved lithium polysulfides (LiPSs) and host materials (FeS2 and FeS in this work) as determined by density functional theory calculations. It is concluded that if only one lithium atom of the polysulfide bonds with the sulfur atoms of FeS2 or FeS, then any chemical interaction between these species is weak or negligible. In addition, FeS2 is shown to have a strong catalytic effect on the reduction reactions of LiPSs. This work demonstrates the limitations of a strategy based on chemical interactions to improve cycling stability and offers new insights into the development of high tap density and high-performance sulfur-based electrodes.
Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

Jie Yue,Yonglin Huang,Sufu Liu,Ji Chen,Fudong Han,Chunsheng Wang

DOI: https://doi.org/10.1021/acsami.0c08564

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:All-solid-state lithium-sulfur batteries (ASSLSBs) hold great promise for safe and high-energy-density energy storage. However, developing high-performance sulfur cathodes has been proven difficult due to low electronic and ionic conductivities and large volume change of sulfur during charge and discharge. Here, we reported an approach to synthesize sulfur cathodes with a mixed electronic and ionic conductivity by infiltrating a solution consisting of Li3PS4 (LPS) solid electrolyte and S active material into a mesoporous carbon (CMK-3). This approach leads to a uniform dispersion of amorphous Li3PS7 (L3PS) catholyte in an electronically conductive carbon matrix, enabling high and balanced electronic/ionic conductivities in the cathode composite. The inherent porous structure of CMK-3 also helps to accommodate the strain/stress generated during the expansion and shrinkage of the active material. In sulfide-based all-solid-state batteries with Li metal as the anode, this cathode composite delivered a high capacity of 1025 mAh g(-1) after 50 cycles at 60 degrees C at 1/8C. This work highlights the important role of high and balanced electronic and ionic conductivities in developing high-performance sulfur cathodes for ASSLSBs.
A High Capacity All Solid‐State Li‐Sulfur Battery Enabled by Conversion‐Intercalation Hybrid Cathode Architecture

Shiqi Xu,Chun Yuen Kwok,Laidong Zhou,Zhizhen Zhang,Ivan Kochetkov,Linda F. Nazar

DOI: https://doi.org/10.1002/adfm.202004239

IF: 19

2020-11-30

Advanced Functional Materials

Abstract:As demands for electrochemical energy storage continue to rise, alternative electrochemistries to conventional Li‐ion batteries become more appealing. Here, an intercalation‐conversion hybrid cathode that combines intercalation‐type VS2 with conversion‐type sulfur chemistry to construct high performance solid‐state lithium‐sulfur batteries is reported. The layered VS2 nanomaterial features Li‐ion transport channels, metallic conductivity, and active capacity contribution, all of which provide an ideal platform for the solid state S/Li2S redox couple to unlock its high gravimetric capacity. The S/VS2/Li3PS4 hybrid cathode composite is prepared by a facile, low‐cost, and low‐energy mechanical blending process. The S/VS2/Li3PS4|Li3PS4|Li/In (or Li) all‐solid‐state cell exhibits sulfur utilization of ≈85%, with a Coulombic efficiency of close to 100%. High areal capacity up to 7.8 mA h cm−2 with an active material loading (S/VS2) as high as 15.5 mg cm−2 is achieved.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Shunjin Yang,Yubing Hu,Yujiang Sun,Xinyu Wang,Xiaohu Hu,Yuzhe Zhang,Zhe Li,Langli Luo,Yongan Yang

DOI: https://doi.org/10.1016/j.cej.2024.157789

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:While all-solid-state lithium batteries and lithium-sulfur batteries are two advanced systems beyond the current generation of lithium-ion batteries and have been extensively studied for years, their combination (i.e., all-solid-state lithium-sulfur batteries, ASSLSBs) is seldomly explored. This paper herein demonstrates the success of making high-performance lithium sulfide cathodes for ASSLSBs. The composite cathode consists of the active material Li2S, a sulfide solid electrolyte Li6PS5Cl, a conductive carbon Ketjen Black, and a catalyst Co9S8 nanoparticles. Its preparation has the following features: mixing precursors via a liquid-phase method, in situ making Li6PS5Cl via calcination, and adding Co9S8 in the liquid-phase stage. Owing to the presence of Co9S8 nanoparticles and the liquid-phase process for ensuring excellent solid–solid interfaces among electrode constituents, the maximum capacity of the obtained electrode with Li2S-loading of 2 mg/cm2 in Li-In|Li6PS5Cl|cathode batteries is enhanced by 0.8 times and the maintaining capacity at the 100th cycle by 4.3 times. With high loadings of 10 mg/cm2, the cathode achieves a high areal capacity of 6.4 mAh/cm2 at room temperature, equivalent to energy densities of 598 Wh/kg, and maintain the retention ratio of over 80 % after 100 cycles. At 60 ℃, ultrahigh areal capacities of 9.4 mAh/cm2 and 14.1 mAh/cm2 can be achieved, equivalent to energy densities of 872 Wh/kg and 653 Wh/kg. Moreover, the mechanistic studies reveal that Co9S8 catalyzes all Li2S and also expedites the conversion between Li2S ↔ S by suppressing the polysulfides intermediates. Thus, this work opens the door of making high-performance Li2S cathodes for developing practical ASSLSBs.
An Electron/Ion Dual Conductive Integrated Cathode Using Cationic/Anionic Redox for High‐Energy‐Density All‐Solid‐State Lithium‐Sulfur Batteries

Wenli Pan,Kentaro Yamamoto,Toshiyuki Matsunaga,Toshiki Watanabe,Mukesh Kumar,Neha Thakur,Tomoki Uchiyama,Masayuki Uesugi,Akihisa Takeuchi,Atsushi Sakuda,Akitoshi Hayashi,Masahiro Tatsumisago,Yoshiharu Uchimoto

DOI: https://doi.org/10.1002/batt.202300427

2023-11-20

Batteries & Supercaps

Abstract:Abstract All‐solid‐state lithium‐sulfur batteries (ASSLSB), composed of sulfur cathode and lithium metal anode with high theoretical capacity, have a potentially higher energy density by weight than a typical lithium‐ion battery (LIB). However, due to insulating sulfur, a relatively large proportion of electronic (carbon) and ionic (solid electrolyte) conductors are mixed for cathode fabrication, leading to inferior practical capacity. Herein, we report a novel integrated cathode Li 2 S‐LiI‐MoS 2 which has relatively high electronic and ionic conductivities (the order of 10 −4 S cm −1 ) without any carbon and solid electrolyte. The ASSLSB with integrated Li 2 S‐LiI‐MoS 2 cathode delivers a remarkably high energy density of 1020 Wh kg −1 at the cathode level at room temperature. By applying precise X‐ray diffraction, pair distribution function analysis and X‐ray computed tomography, it is found that the formation of an ionic conducting phase composed mainly of LiI during discharge is responsible for the high rate capability. Furthermore, X‐ray absorption fine structure (XAFS) has also revealed the charge compensation mechanism and ascertained the involvement of both Mo 3d and S 3p orbitals during the charging and discharging process. It is believed the strategy will pave the way for developing high practical energy density at room temperature for all‐solid‐state batteries.

materials science, multidisciplinary,electrochemistry
A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

Ashley Cronk,Xiaowei Wang,Jin An Sam Oh,Shuang Bai,Phillip Ridley,Mehdi Chouchane,Chen-Jui Huang,Grayson Deysher,Hedi Yang,Baharak Sayahpour,Marta Vicencio,Choonghyeon Lee,Dongchan Lee,Min-Sang Song,Jihyun Jang,Jeong Beom Lee,Y. Shirley Meng,So-Yeon Ham,Diyi Cheng

DOI: https://doi.org/10.26434/chemrxiv-2024-hj829

2024-08-12

Abstract:All-solid-state batteries (ASSB) using lithium-sulfur (Li-S) cathodes, present a low-cost energy storage solution that can achieve energy densities exceeding 500 Wh kg-1. However, their development in ASSBs has been hindered by poor kinetics, insulative interfaces, and (chemo)mechanical degradation, resulting in low utilization and cycle life. Here, we manipulate the meta-stability and redox activity of sulfide solid electrolytes to form ionically conductive interphases on the cathode surface using a simple and scalable synthesis approach. This creates a microstructure that enables high utilization and reversible electrochemical behavior with both sulfur and Li2S. Bulk and morphological characterization with X-ray absorption spectroscopy quantification is used to validate reversibility. Additionally, optimizing the cathode/catholyte microstructure by tailoring particle size to the micron-scale enhances rate performance for practical operation. The coupled (chemo)mechanical behavior of Li-S cathodes and sulfide solid electrolytes was found to alleviate internal stresses with cycling, especially when paired with high capacity anodes like silicon. As a result, this approach enables high loading sulfur cathodes up to 11 mAh cm-2 with stable operation at room temperature. Several high energy density cell architectures are demonstrated, particularly a Li2S anode-free pouch cell at 4.5 mAh cm-2 that can operate under low stack pressures. This work establishes new design strategies for Li-S cathodes, providing a pathway to enable high energy density batteries for a wide range of future applications.

Chemistry
[Cysts of the prostatic region].

L. Denis

1960-07-01

Abstract:
Scalable Composites Benefiting from Transition-Metal Oxides as Cathode Materials for Efficient Lithium-Sulfur Batteries

Vittorio Marangon,Eugenio Scaduti,Viviana Fatima Vinci,Jusef Hassoun

DOI: https://doi.org/10.1002/celc.202200374

2022-06-16

Abstract:Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur and 20 wt.% of either MnO2 or TiO2, leading to a sulfur content in the electrode of 64 wt.% and revealing a reversible, fast, and lowly polarized conversion process in the cell with limited interphase resistance. The S-TiO2 composite exhibits an excellent rate capability between C/10 and 2C, and a cycle life extended over 400 cycles at 2C, owing to the effects of the nanometric TiO2 additive in boosting the reaction kinetics. Instead, the micrometric sized particles of MnO2 partially limit the electrochemical activity of S-MnO2 to the current rate of 1C. Nevertheless, both S-MnO2 and S-TiO2 withstand a sulfur loading up to values approaching 6 mgcm-2, and deliver an areal capacit ranging from about 4.5 to 5.5 mAhcm-2 at C/5. The excellent performances of the metal oxide-sulfur electrodes, even at high active material loading, and the possible scalability of the synthetic pathway adopted in the work suggest that the composites are viable cathodes for next-generation Li-S batteries with high energy density and efficient electrochemical process.

Materials Science,Chemical Physics
High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

Chao Zheng,Kai Wang,Lujie Li,Hui Huang,Chu Liang,Yongping Gan,Xinping He,Wenkui Zhang,Jun Zhang

DOI: https://doi.org/10.3389/fenrg.2020.606494

IF: 3.4

2021-02-08

Frontiers in Energy Research

Abstract:Among many lithium secondary batteries, lithium–sulfur batteries stand out because of their high theoretical specific energy, low cost, non-toxicity and the fact that they cause no environmental pollution. However, due to poor electronic and ionic conductivity, shuttle effect, lithium dendrites and other defects, it remains a big challenge to achieve large-scale application of lithium-sulfur batteries. Here we report an all-solid-state lithium–sulfur battery based on Li-argyrodite Li 6 PS 5 Cl solid-state electrolytes through a slurry-coating method. Li 6 PS 5 Cl with a high ionic conductivity of 1.3 × 10 –3 S cm −1 at room temperature is used as the solid electrolyte and the ion conductive additive in the electrode. The sulfur-based composite cathode is fabricated through a slurry-coating process by dispersing sulfur, Li 6 PS 5 Cl, ethyl cellulose, and carbon black in 1,3-dioxolane (DOL). This method can disperse the Li 6 PS 5 Cl around sulfur particles well, and the solvent does not react with any component of composite cathodes during preparation. The battery delivers a high discharge capacity of 962 mA h g −1 at room temperature for the first cycle at 80 mA g −1 . While the Coulombic efficiency is approximately 99.5% during 100 cycles. This work provides a new insight into the combination method between the sulfide-type SSEs and sulfur cathodes, which is critical to the electrochemical performance of all-solid-state lithium-sulfur batteries.

energy & fuels
A new high-capacity cathode for all-solid-state lithium sulfur battery

Qing Wang,Ya Chen,Jun Jin,Zhaoyin Wen

DOI: https://doi.org/10.1016/j.ssi.2020.115500

IF: 3.699

2020-12-01

Solid State Ionics

Abstract:A new composite sulfur cathode with high sulfur loading for all-solid-state lithium sulfur (LiS) battery, along with an in-situ coating process for preparing this composite cathode, is proposed in this manuscript. This composite cathode includes carbonized cotton fibers as the electron conductive skeleton, sulfide electrolyte coating on the carbon fibers as the Li-ion conductor, and elemental sulfur as the active material. The in-situ coating of sulfide electrolyte is carried out via a liquid-phase process, which results in a close contact between carbon fiber and the sulfide electrolyte. The subsequent mixing and heating treatment with elemental sulfur form a composite cathode with good electrochemical performance. In the assembled all-solid-state LiS battery with Li6PS5Cl electrolyte and lithium metal anode, the composite cathode delivers a super high discharge capacity of 32.8 mAh.

chemistry, physical,physics, condensed matter
High Energy Density Sulfur-Rich MoS6-Based Nanocomposite for Room Temperature All-Solid-State Lithium Metal Batteries

Mengli Yang,Yu Yao,Mingyuan Chang,Fuli Tian,Wenrui Xie,Xiaolei Zhao,Yan Yu,Xiayin Yao

DOI: https://doi.org/10.1002/aenm.202300962

IF: 27.8

2023-01-01

Advanced Energy Materials

Abstract:The all-solid-state lithium-sulfur battery is considered to be a promising energy device due to high energy density and excellent safety. However, sulfur suffers from its insulating nature and large volume changes. Employing transition-metal sulfide cathodes is an attractive alternative. Herein, a high energy density sulfur-rich MoS6-based nanocomposite is designed, where MoS6 nanospheres are homogenously anchored on carbon nanotubes (CNTs) by a wet-chemical method, providing improved electronic conductivity and reduced volume changes. In addition, a nanosized Li7P3S11 electrolyte is in situ coated on the surface of MoS6-CNT20 to realize intimate interface contact and form nanoscale electronic/ionic transportation networks. The resultant MoS6-CNT20@15%Li7P3S11 composite shows high electronic conductivity (1.7 x 10(-1) S cm(-1)) and ionic conductivity (6.7 x 10(-4) S cm(-1)), which are eight and three orders of magnitude improved compared to those of MoS6. The Li/Li6PS5Cl/MoS6-CNT20@15%Li7P3S11 battery exhibits an initial discharge capacity of 1034.32 mAh g(-1) at 0.1 A g(-1). In addition, an ultrahigh reversible energy density of 1640 Wh kg(-1) for the active material can be realized, which is the highest among all transition-metal sulfide cathodes. Moreover, it shows a reversible capacity of 550.00 mAh g(-1) at 0.5 A g(-1) after 1000 cycles, demonstrating that the sulfur-rich MoS6-based nanocomposite is a promising highenergy density cathode material for next-generation all-solid-state lithium batteries.
High-performance all-solid-state lithium-sulfur batteries with sulfur/carbon nano-hybrids in composite cathode

Yibo Zhang,Ting Liu,Qinghua Zhang,Xue Zhang,Shuo Wang,Xinzhi Wang,Liangliang Li,Li-Zhen Fan,Ce-Wen Nan,Yang Shen

DOI: https://doi.org/10.1039/c8ta08420c

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:The shuttle effect poses great challenges to the safety and cycle lifetime of lithium-sulfur (Li-S) batteries. One promising resolution is to substitute liquid electrolytes with solid electrolytes. However, the low intrinsic electrical conductivity of solid electrolytes results in the slow migration of lithium ions and electrons in the composite cathodes and compromises the rate and cycling performance of the all-solid-state Li-S cells. Here, sulfur nanoparticles are fused with carbon species of different dimensions (e.g., 0D carbon nanoparticles, 1D multi-wall carbon nanotubes (MWCNTs) and ultra-long vapor grown carbon fibers (VGCF)) to form nanohybrids by the solvent exchange method, and are then assembled into electrically conducting networks in the composite cathode. The 0D and 1D nanohybrids facilitate the short and long-range migration of electrons, respectively. Fused with sulfur nanoparticles, the conducting networks themselves could act as sulfur-bearing matrixes and shorten the diffusion path of lithium ions. These favorable features give rise to much-enhanced electric/ionic conductivity and high sulfur loading of the composite cathode. The all-solid-state Li-S batteries (ASSLSBs) assembled with these composite cathodes have so far exhibited the highest high-rate cycling capacity and retention at room temperature. A discharge capacity of 1140.9 mA h g(-1) at 0.176 mA cm(-2) (about 0.1C) was achieved with a capacity retention of 100% after 400 cycles. After 1000 cycles, the battery still showed a high discharge capacity of 834.3 mA h g(-1) at 0.44 mA cm(-2) (about 0.25C).
Enhanced Dual-Directional Sulfur Redox Via a Biotemplated Single-Atomic Fe-N2 Mediator Promises Durable Li-S Batteries.

Yifan Ding,Qiushi Cheng,Jianghua Wu,Tianran Yan,Zixiong Shi,Menglei Wang,Dongzi Yang,Peng Wang,Liang Zhang,Jingyu Sun

DOI: https://doi.org/10.1002/adma.202202256

IF: 29.4

2022-01-01

Advanced Materials

Abstract:The lithium-sulfur (Li-S) battery is considered as an appealing candidate for next-generation electrochemical energy storage systems because of high energy and low cost. Nonetheless, its development is plagued by the severe polysulfide shuttling and sluggish reaction kinetics. Although single-atom catalysts (SACs) have emerged as a promising remedy to expedite sulfur redox chemistry, the mediocre single-atom loading, inferior atomic utilization, and elusive catalytic pathway handicap their practical application. To tackle these concerns, in this work, unsaturated Fe single atoms with high loading capacity (approximate to 6.32 wt%) are crafted on a 3D hierarchical C3N4 architecture (3DFeSA-CN) by means of biotemplated synthesis. By electrokinetic analysis and theoretical calculations, it is uncovered that the 3DFeSA-CN harnesses robust electrocatalytic activity to boost dual-directional sulfur redox. As a result, S@3DFeSA-CN can maintain a durable cyclic performance with a negligible capacity decay rate of 0.031% per cycle over 2000 cycles at 1.0 C. More encouragingly, an assembled Li-S battery with a sulfur loading of 5.75 mg cm(-2) can harvest a high areal capacity of 6.18 mAh cm(-2). This work offers a promising solution to optimize the carbonaceous support and coordination environment of SACs, thereby ultimately elevating dual-directional sulfur redox in pragmatic Li-S batteries.
Synergistic Interfacial Optimization for High-Sulfur-Content All-Solid-State Lithium-Sulfur Batteries

BoSheng Zhao,Chang Zhou,Peng Chen,XuePing Gao

DOI: https://doi.org/10.1021/acsami.3c16067

2024-01-31

Abstract:Improving the sulfur content in the cathode is essential for achieving high-energy-density all-solid-state lithium-sulfur batteries (ASSLSBs). However, the complex multiinterfaces, akin to the short wooden planks that consist of the cask, severely limit the performance of ASSLSBs with high sulfur content. Since singular approaches fail to optimize these interfaces simultaneously, we propose a synergistic approach using a dual-doped sulfide solid electrolyte (Y2S3 and LiI) and an SbSn alloy sulfur host in this work. The incorporation of Y2S3 in the solid electrolyte serves to improve the electrolyte-electrolyte interfaces and enhance the ionic conductivity, while the inclusion of LiI helps stabilize the electrolyte-anode interface and suppress dendrite formation. Meanwhile, the SbSn alloy sulfur host facilitates the transfer of Li+ at the electrolyte-cathode interfaces. Consequently, the solid-solid interfaces are significantly improved, leading to impressive specific capacities in ASSLSBs with high sulfur content (>44% in the cathode composite) at room temperature (1163.5 mAh g-1) and at 60 °C (1408.7 mAh g-1) during the 50th cycle at 0.05C. This work presents a promising strategy for achieving practical high-performance ASSLSBs.
High Energy Density Sulfur‐Rich MoS6‐Based Nanocomposite for Room Temperature All‐Solid‐State Lithium Metal Batteries

Mengli Yang,Yu Yao,Mingyuan Chang,Fuli Tian,Wenrui Xie,Xiaolei Zhao,Yan Yu,Xiayin Yao

DOI: https://doi.org/10.1002/aenm.202300962

IF: 27.8

2023-06-12

Advanced Energy Materials

Abstract:A sulfur‐rich MoS6‐based nanocomposite (MoS6‐CNT20@15%Li7P3S11) is designed, showing eight and three orders of magnitude improvement compared to those of MoS6 in electronic and ionic conductivities, respectively. A MoS6‐CNT20@15%Li7P3S11 based all‐solid‐state lithium battery exhibits excellent cycling stability and delivers the highest reversible energy density among all the transition‐metal sulfide cathodes reported so far with 1640 Wh kg−1 at 0.1 A g−1 based on active material. The all‐solid‐state lithium–sulfur battery is considered to be a promising energy device due to high energy density and excellent safety. However, sulfur suffers from its insulating nature and large volume changes. Employing transition‐metal sulfide cathodes is an attractive alternative. Herein, a high energy density sulfur‐rich MoS6‐based nanocomposite is designed, where MoS6 nanospheres are homogenously anchored on carbon nanotubes (CNTs) by a wet‐chemical method, providing improved electronic conductivity and reduced volume changes. In addition, a nanosized Li7P3S11 electrolyte is in situ coated on the surface of MoS6‐CNT20 to realize intimate interface contact and form nanoscale electronic/ionic transportation networks. The resultant MoS6‐CNT20@15%Li7P3S11 composite shows high electronic conductivity (1.7 × 10−1 S cm−1) and ionic conductivity (6.7 × 10−4 S cm−1), which are eight and three orders of magnitude improved compared to those of MoS6. The Li/Li6PS5Cl/MoS6‐CNT20@15%Li7P3S11 battery exhibits an initial discharge capacity of 1034.32 mAh g−1 at 0.1 A g−1. In addition, an ultrahigh reversible energy density of 1640 Wh kg−1 for the active material can be realized, which is the highest among all transition‐metal sulfide cathodes. Moreover, it shows a reversible capacity of 550.00 mAh g−1 at 0.5 A g−1 after 1000 cycles, demonstrating that the sulfur‐rich MoS6‐based nanocomposite is a promising highenergy density cathode material for next‐generation all‐solid‐state lithium batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

Fudong Han,Jie Yue,Xiulin Fan,Tao Gao,Chao Luo,Zhaohui Ma,Liumin Suo,Chunsheng Wang

DOI: https://doi.org/10.1021/acs.nanolett.6b01754

IF: 10.8

2016-01-01

Nano Letters

Abstract:All-solid-state lithium-sulfur batteries (ASSLSBs) using highly conductive sulfide-based solid electrolytes suffer from low sulfur utilization, poor cycle life, and low rate performance due to the huge volume change of the electrode and the poor electronic and ionic conductivities of S and Li2S. The most promising approach to mitigate these challenges lies in the fabrication of a sulfur nanocomposite electrode consisting of a homogeneous distribution of nanosized active material, solid electrolyte, and carbon. Here, we reported a novel bottom-up method to synthesize such a nanocomposite by dissolving Li2S as the active material, polyvinylpyrrolidone (PVP) as the carbon precursor, and Li6PS5Cl as the solid electrolyte in ethanol, followed by a coprecipitation and high-temperature carbonization process. Li2S active material and Li6PS5Cl solid electrolyte with a particle size of ∼4 nm were uniformly confined in a nanoscale carbon matrix. The homogeneous nanocomposite electrode consisting of different nanoparticles with distinct properties of lithium storage capability, mechanical reinforcement, and ionic and electronic conductivities enabled a mechanical robust and mixed conductive (ionic and electronic conductive) sulfur electrode for ASSLSB. A large reversible capacity of 830 mAh/g (71% utilization of Li2S) at 50 mA/g for 60 cycles with a high rate performance was achieved at room temperature even at a high loading of Li2S (∼3.6 mg/cm(2)). This work provides a new strategy to design a mechanically robust, mixed conductive nanocomposite electrode for high-performance all-solid-state lithium sulfur batteries.
Self‐Formed Electronic/Ionic Conductive Fe3S4 @ S @ 0.9na3sbs4⋅0.1nai Composite for High‐Performance Room‐Temperature All‐Solid‐State Sodium–Sulfur Battery

Hongli Wan,Liangting Cai,Yu Yao,Wei Weng,Yuezhan Feng,Jean Pierre Mwizerwa,Gaozhan Liu,Yan Yu,Xiayin Yao

DOI: https://doi.org/10.1002/smll.202001574

IF: 13.3

2020-01-01

Small

Abstract:Fe3S4 (R) S (R) 0.9Na(3)SbS(4).0.1NaI composite cathode is prepared through one-step wet-mechanochemical milling procedure. During milling process, ionic conduction pathway is self-formed in the composite due to the formation of 0.9Na(3)SbS(4).0.1NaI electrolyte without further annealing treatment. Meanwhile, the introduction of Fe(3)S(4)can increase the electronic conductivity of the composite cathode by one order of magnitude and nearly double enhance the ionic conductivities. Besides, the aggregation of sulfur is effectively suppressed in the obtained Fe3S4 (R) S (R) 0.9Na(3)SbS(4).0.1NaI composite, which will enhance the contact between sulfur and 0.9Na(3)SbS(4).0.1NaI electrolyte, leading to a decreased interfacial resistance and improving the electrochemical kinetics of sulfur. Therefore, the resultant all-solid-state sodium-sulfur battery employing Fe3S4 (R) S (R) 0.9Na(3)SbS(4).0.1NaI composite cathode shows discharge capacity of 808.7 mAh g(-1)based on Fe3S4(R)S and a normalized discharge capacity of 1040.5 mAh g(-1)for element S at 100 mA g(-1)for 30 cycles at room temperature. Moreover, the battery also exhibits excellent cycling stability with a reversible capacity of 410 mAh g(-1)at 500 mA g(-1)for 50 cycles, and superior rate capability with capacities of 952.4, 796.7, 513.7, and 445.6 mAh g(-1)at 50, 100, 200, and 500 mA g(-1), respectively. This facile strategy for sulfur-based composite cathode is attractive for achieving room-temperature sodium-sulfur batteries with superior electrochemical performance.

Community pharmacy residency program: a contemporary perspective.

Right-to-left shunt and neurological decompression sickness in divers

Design of Composite Cathodes for Sulfide-Based All-Solid-state Batteries

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

Enhanced Sulfur Transformation by Multifunctional FeS2/FeS/S Composites for High‐Volumetric Capacity Cathodes in Lithium–Sulfur Batteries

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

A High Capacity All Solid‐State Li‐Sulfur Battery Enabled by Conversion‐Intercalation Hybrid Cathode Architecture

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

An Electron/Ion Dual Conductive Integrated Cathode Using Cationic/Anionic Redox for High‐Energy‐Density All‐Solid‐State Lithium‐Sulfur Batteries

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

[Cysts of the prostatic region].

Scalable Composites Benefiting from Transition-Metal Oxides as Cathode Materials for Efficient Lithium-Sulfur Batteries

High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

A new high-capacity cathode for all-solid-state lithium sulfur battery

High Energy Density Sulfur-Rich MoS<sub>6</sub>-Based Nanocomposite for Room Temperature All-Solid-State Lithium Metal Batteries

High-performance all-solid-state lithium-sulfur batteries with sulfur/carbon nano-hybrids in composite cathode

Enhanced Dual-Directional Sulfur Redox Via a Biotemplated Single-Atomic Fe-N2 Mediator Promises Durable Li-S Batteries.

Synergistic Interfacial Optimization for High-Sulfur-Content All-Solid-State Lithium-Sulfur Batteries

High Energy Density Sulfur‐Rich MoS6‐Based Nanocomposite for Room Temperature All‐Solid‐State Lithium Metal Batteries

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

Self‐Formed Electronic/Ionic Conductive Fe3S4 @ S @ 0.9na3sbs4⋅0.1nai Composite for High‐Performance Room‐Temperature All‐Solid‐State Sodium–Sulfur Battery