Scalable Composites Benefiting from Transition-Metal Oxides as Cathode Materials for Efficient Lithium-Sulfur Batteries

Vittorio Marangon,Eugenio Scaduti,Viviana Fatima Vinci,Jusef Hassoun

DOI: https://doi.org/10.1002/celc.202200374

2022-06-16

Abstract:Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur and 20 wt.% of either MnO2 or TiO2, leading to a sulfur content in the electrode of 64 wt.% and revealing a reversible, fast, and lowly polarized conversion process in the cell with limited interphase resistance. The S-TiO2 composite exhibits an excellent rate capability between C/10 and 2C, and a cycle life extended over 400 cycles at 2C, owing to the effects of the nanometric TiO2 additive in boosting the reaction kinetics. Instead, the micrometric sized particles of MnO2 partially limit the electrochemical activity of S-MnO2 to the current rate of 1C. Nevertheless, both S-MnO2 and S-TiO2 withstand a sulfur loading up to values approaching 6 mgcm-2, and deliver an areal capacit ranging from about 4.5 to 5.5 mAhcm-2 at C/5. The excellent performances of the metal oxide-sulfur electrodes, even at high active material loading, and the possible scalability of the synthetic pathway adopted in the work suggest that the composites are viable cathodes for next-generation Li-S batteries with high energy density and efficient electrochemical process.

Materials Science,Chemical Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop efficient cathode materials for lithium - sulfur (Li - S) batteries in order to improve the energy density and cycle life of the batteries. Specifically, researchers prepared scalable composites as cathode materials for Li - S batteries by compounding transition metal oxides (such as MnO₂ and TiO₂) with sulfur.

### Main problems
1. **Low energy density**: Although current lithium - ion batteries are widely used, their energy density is limited and it is difficult to meet the demand for high energy density in applications such as electric vehicles.
2. **Short cycle life**: Li - S batteries have a serious capacity fading problem during the charging and discharging process. The main reason is the "shuttle effect" of polysulfides, that is, polysulfides dissolve in the electrolyte and migrate to the negative electrode surface, resulting in the loss of active substances and the reduction of Coulombic efficiency.
3. **Feasibility of practical applications**: In order to realize the large - scale commercial application of Li - S batteries, a synthesis method that can both improve performance and have scalability needs to be found.

### Solutions
The paper proposes to use transition metal oxides (MnO₂ and TiO₂) compounded with sulfur to prepare composites with a high sulfur content (80 wt.%). These composites have the following advantages:
- **High sulfur content**: The weight percentage of sulfur in the composites is as high as 64 wt.%, which helps to improve the energy density of the batteries.
- **Inhibition of the polysulfide shuttle effect**: MnO₂ and TiO₂ can effectively adsorb polysulfides and reduce their dissolution in the electrolyte, thereby improving the cycle stability and Coulombic efficiency of the batteries.
- **Excellent electrochemical performance**: In particular, the S - TiO₂ composite exhibits excellent rate performance and long cycle life, and can stably cycle more than 400 times at a high rate of 2C.

### Experimental results
- **Structure and morphology**: XRD and SEM analyses show that MnO₂ and TiO₂ maintain their original crystal structures and morphologies in the composites.
- **Electrochemical performance**: CV and EIS tests show that the electrochemical performance of the S - TiO₂ composite is better than that of S - MnO₂ at different current densities, especially more prominent at high rates.
- **Long - term cycle stability**: The S - TiO₂ composite can still maintain a relatively high capacity after cycling 400 times at a high rate of 2C, showing good cycle stability.

In summary, this paper aims to improve the performance of Li - S batteries by introducing transition metal oxides, providing new ideas and methods for the development of next - generation high - performance and long - life lithium - sulfur batteries.