Abstract:All-solid-state lithium–sulfur batteries (ASLBs) have the potential to achieve high energy density because of sulfur's high theoretical capacity (1672 mAh g–1) while alleviating persistent polysulfide shuttling inherent to lithium–sulfur batteries based on liquid organic electrolyte. However, the homogenization of sulfur, carbon, and solid electrolyte is a challenge to achieving high-performance cathodes for ASLBs. Herein, we demonstrate a promising sulfur–carbon composite with high sulfur content (71.4–83.3%) prepared using a sulfur vapor deposition (SVD) approach to show enhanced discharge specific capacities, rate performance, and cycling stability, outperforming conventional sulfur liquid deposition (SLD) and sulfur solid deposition (SSD) approaches. A higher discharge specific sulfur capacity of 1792.6 mAh g–1 has been achieved at 0.1C and 60 °C with improvement ascribed to smaller particle size and more homogeneous and deeply confined sulfur in sulfur–carbon composite, in contrast to 1619.2 and 1329.3 mAh g–1 for samples prepared by conventional SLD and SSD approaches, respectively.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01956?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01956</a>.Experimental section for the synthesis of the developed sulfur–carbon composites and Li3PS4 electrolyte, chemical characterization and electrochemical testing procedure, supporting figures, and performance comparison between the ASLBs developed in this work and the literature are provided. (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01956/suppl_file/nz0c01956_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A High Capacity All Solid‐State Li‐Sulfur Battery Enabled by Conversion‐Intercalation Hybrid Cathode Architecture

High-performance all-solid-state lithium-sulfur batteries with sulfur/carbon nano-hybrids in composite cathode

Solid‐State Lithium–Sulfur Battery Enabled by Thio‐LiSICON/Polymer Composite Electrolyte and Sulfurized Polyacrylonitrile Cathode

A new high-capacity cathode for all-solid-state lithium sulfur battery

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

Intercalation-conversion hybrid cathodes enabling Li–S full-cell architectures with jointly superior gravimetric and volumetric energy densities

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

High Areal Capacity Cation and Anionic Redox Solid-State Batteries Enabled by Transition Metal Sulfide Conversion

Confining Sulfur in Porous Carbon by Vapor Deposition to Achieve High-Performance Cathode for All-Solid-State Lithium–Sulfur Batteries

A Solid‐Phase Conversion Sulfur Cathode with Full Capacity Utilization and Superior Cycle Stability for Lithium‐Sulfur Batteries

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Li 2 S-Based Composite Cathode with in Situ-Generated Li 3 PS 4 Electrolyte on Li 2 S for Advanced All-Solid-State Lithium-Sulfur Batteries

Approaching high rate All-Solid-State Lithium-Sulfur batteries via promoted sulfur conversion with nickel oxide nanoparticle electrocatalyst

Quasi‐Solid Sulfur Conversion for Energetic All‐Solid‐State Na‐S Battery

High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

High Performance Solid-State Lithium-Sulfur Battery Enabled by Multi-Functional Cathode and Flexible Hybrid Solid Electrolyte

Localized S-Li2s Conversion with Accelerated Kinetics Mediated by Mixed Conductive Shell for High-Performance Solid-State Lithium-Sulfur Battery

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

Expediting the Conversion of Li 2 S 2 to Li 2 S Enables High-Performance Li–S Batteries

Solid/Quasi‐Solid Phase Conversion of Sulfur in Lithium–Sulfur Battery

Tailoring the Interface between Sulfur and Sulfide Solid Electrolyte for High-Areal-Capacity All-Solid-State Lithium–Sulfur Batteries