A new high-capacity cathode for all-solid-state lithium sulfur battery

Qing Wang,Ya Chen,Jun Jin,Zhaoyin Wen

DOI: https://doi.org/10.1016/j.ssi.2020.115500

IF: 3.699

2020-12-01

Solid State Ionics

Abstract:<p>A new composite sulfur cathode with high sulfur loading for all-solid-state lithium sulfur (LiS) battery, along with an in-situ coating process for preparing this composite cathode, is proposed in this manuscript. This composite cathode includes carbonized cotton fibers as the electron conductive skeleton, sulfide electrolyte coating on the carbon fibers as the Li-ion conductor, and elemental sulfur as the active material. The in-situ coating of sulfide electrolyte is carried out via a liquid-phase process, which results in a close contact between carbon fiber and the sulfide electrolyte. The subsequent mixing and heating treatment with elemental sulfur form a composite cathode with good electrochemical performance. In the assembled all-solid-state LiS battery with Li₆PS₅Cl electrolyte and lithium metal anode, the composite cathode delivers a super high discharge capacity of 32.8 mAh.</p>

chemistry, physical,physics, condensed matter

What problem does this paper attempt to address?

This paper attempts to address several key issues in all-solid-state lithium-sulfur batteries (Li-S batteries):

1. **Increasing Sulfur Loading**: Traditional lithium-ion batteries have reached their limits in terms of safety and durability, while lithium-sulfur batteries, with their higher theoretical capacity (1675 mAh/g) and energy density (2600 Wh/kg), present a promising alternative. However, sulfur as an active material is both electronically and ionically insulating, requiring a large amount of conductive additives (such as carbon materials), which significantly reduces the actual capacity. Therefore, how to increase the sulfur loading while maintaining good electrochemical performance is a challenge.

2. **Reducing Shuttle Effect**: Lithium-sulfur batteries using organic liquid electrolytes suffer from a severe shuttle effect, where highly soluble polysulfides migrate in the liquid electrolyte, leading to capacity decay. Additionally, the growth of lithium dendrites is also a problem. Using solid-state electrolytes can effectively reduce these phenomena, but the contact resistance between the solid-state electrolyte and the electrodes is relatively high, affecting battery performance.

3. **Improving Interface Contact**: In solid-state batteries, the solid-solid contact between particles and the interface contact impedance between the electrode and the solid-state electrolyte are high, which is a major obstacle to the application of these batteries. Although adding some liquid electrolyte to the cathode can reduce impedance, it leads to the dissolution of polysulfides into the liquid electrolyte, resulting in capacity decay.

To address these issues, the authors propose a new composite sulfur cathode prepared by an in-situ coating process. This composite cathode includes carbonized cotton fibers as an electronic conductive framework, a sulfide electrolyte coating as a lithium-ion conductor, and elemental sulfur as the active material. The in-situ coating of the sulfide electrolyte on the carbon fiber surface through a liquid-phase process ensures close contact between the carbon fibers and the sulfide electrolyte. Subsequently, sulfur is mixed and heat-treated to form a composite cathode with good electrochemical performance.

Experimental results show that the all-solid-state lithium-sulfur battery based on this composite cathode exhibits an extremely high discharge capacity (32.8 mAh) at 60°C, demonstrating the advantage of high sulfur loading.