Effect of SNP at position 40237 in exon 7 of the TPH2 gene on susceptibility to suicide

L. Ke,Zhang Qi,Y. Ping,Cheng Yi Ren

DOI: https://doi.org/10.1016/j.brainres.2006.09.007

IF: 3.61

2006-11-29

Brain Research

Abstract:

What problem does this paper attempt to address?

Bubble evolution and transport in PEM water electrolysis: Mechanism, impact, and management

Shu Yuan,Congfan Zhao,Xiyang Cai,Lu An,Shuiyun Shen,Xiaohui Yan,Junliang Zhang

DOI: https://doi.org/10.1016/j.pecs.2023.101075

IF: 29.5

2023-01-20

Progress in Energy and Combustion Science

Abstract:Proton exchange membrane water electrolysis (PEMWE), as a promising technology for hydrogen production from renewable energy sources, has great potential for industrial application. Gas bubbles are known to influence the PEMWE cell performance significantly, but a full picture of bubble behaviors and their impacts on cell performance has been lacking. In this review, we first discuss the most recent advances toward understanding the bubble evolution and transport processes as well as the mechanisms of how bubbles impact the PEMWE. Then the state-of-the-art bubble management methods to mitigate bubble-induced performance losses are summarized. Due to the similarity between PEMWE and anion exchange membrane water electrolysis (AEMWE), we also extend related discussions for AEMWE. Lastly, we present principles of bubble management, followed by an outlook of scientific questions and suggestions for future research priorities.

energy & fuels,engineering, chemical, mechanical,thermodynamics
Revisited electrochemical gas evolution reactions from the perspective of gas bubbles

Weinan Yin,Yuntao Cai,Lingbin Xie,Hao Huang,Enchi Zhu,Junan Pan,Jiaqi Bu,Hao Chen,Ye Yuan,Zechao Zhuang,Longlu Wang

DOI: https://doi.org/10.1007/s12274-022-5133-5

IF: 9.9

2022-12-24

Nano Research

Abstract:Electrochemical gas evolution reactions are common but essential in many electrochemical processes including water electrolysis. During these processes, gas bubbles are constantly nucleating on reaction interfaces in electrolyte and consequently exert an impact on catalysts and the performance. In the past few decades, extensive studies have been conducted to characterize bubbles with emerging advanced technologies, manage behaviors of bubbles, and apply bubbles to various domains. In this review, we summarize representative discoveries as well as recent advancements in electrochemical gas evolution reactions from the perspective of gas bubbles. Finally, we end up this review with a profound outlook on future research topics from the combination of experiments and theoretical techniques, non-negligible bubble effects, gravity-free situation, and reactions under practical industrial conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Integrated Catalyst-Substrate Electrodes for Electrochemical Water Splitting: A Review on Dimensional Engineering Strategy

Weixue Meng,Rui Pang,Meng Li,Lei Han,Xiaobing Kong,Ding Zhang,Shipeng Zhang,Yingjiu Zhang,Yuanyuan Shang,Anyuan Cao

DOI: https://doi.org/10.1002/smll.202310469

IF: 13.3

2024-01-28

Small

Abstract:Water splitting (or, water electrolysis) is considered as a promising approach to produce green hydrogen and relieve the ever-increasing energy consumption as well as the accompanied environmental impact. Development of high-efficiency, low-cost practical water-splitting systems demands elegant design and fabrication of catalyst-loaded electrodes with both high activity and long-life time. To this end, dimensional engineering strategies, which effectively tune the microstructure and activity of electrodes as well as the electrochemical kinetics, play an important role and have been extensively reported over the past years. Here, a type of most investigated electrode configurations is reviewed, combining particulate catalysts with 3D porous substrates (aerogels, metal foams, hydrogels, etc.), which offer special advantages in the field of water splitting. It is analyzed the design principles, structural and interfacial characteristics, and performance of particle-3D substrate electrode systems including overpotential, cycle life, and the underlying mechanism toward improved catalytic properties. In particular, it is also categorized the catalysts as different dimensional particles, and show the importance of building hybrid composite electrodes by dimensional control and engineering. Finally, present challenges and possible research directions toward low-cost high-efficiency water splitting and hydrogen production is discussed.
Study of bubble evolution behavior on electrode surface based on lattice Boltzmann method

Shengzheng Ji,Guogang Yang,Jiadong Liao,Ziheng Jiang,Xiaoxing Yang,Zhuangzhuang Xu

DOI: https://doi.org/10.1007/s11581-024-05721-z

IF: 2.961

2024-07-26

Ionics

Abstract:Photoelectrochemical water splitting is regarded as one of the most efficient methods for hydrogen production, with photoelectrode materials playing a crucial role in enhancing its efficiency. To further improve the effectiveness of hydrogen production via photoelectrochemical water splitting, a lattice Boltzmann method (LBM) with multiple relaxation times (MRT) is employed to simulate the evolution of bubble growth, coalescence, and detachment on the photoelectrode surface. This simulation takes into account factors such as bubble detachment diameter, contact angle of the photoelectrode surface, and the spatial distribution of nucleation sites. According to simulation results, when the gravity coefficient increases, the bubble detachment diameter decreases, a contact angle between 120° and 140° is found to be optimal for bubble detachment. When the contact angle is less than 90°, the bubbles typically adhere to the surface of nucleation sites. The bubble detachment time decreases gradually as the contact angle ranges from 120° to 160°, and the bubble detachment time drops by 1.8 ms and 0.2 ms, respectively. When the distance between two nucleation sites was 5 μm, 10 μm, 15 μm, and 20 μm, and the bubble detachment time was 3 ms, 2.2 ms, 3 ms, and 2.9 ms, respectively. The bubble detachment time could be effectively reduced by appropriately increasing the distance between nucleation sites in a certain range. This study elucidates the behavior of bubbles on photoelectrode surfaces during photocatalytic water decomposition, providing valuable insights for optimizing photoelectrode design and improving the efficiency of hydrogen production.

chemistry, physical,physics, condensed matter,electrochemistry
A Multi‐Bioinspired Dual‐Gradient Electrode for Microbubble Manipulation toward Controllable Water Splitting

Zhiyun Long,Yuyan Zhao,Chunhui Zhang,Yuheng Zhang,Cunming Yu,Yuchen Wu,Jun Ma,Moyuan Cao,Lei Jiang

DOI: https://doi.org/10.1002/adma.201908099

IF: 29.4

2020-03-04

Advanced Materials

Abstract:Clean energy generated from total water splitting is expected to be an affordable, sustainable, and reliable resource but it remains a challenge to gain pure fuel with a controllable pathway. Here, a simple and economical strategy that enables in situ separation of H2/O2 product by manipulating the generated gas phases with the aid of multi‐bioinspired electrodes is proposed. This versatile electrode is based on a Janus asymmetric foam with dual gradients, i.e., the wettability gradient promotes the one‐way gas penetration and the geometry gradient boosts the spontaneous on‐surface transport in the horizontal direction, which cooperatively facilitates self‐driven 3D bubble transport in an aqueous environment. Benefitting from the 3D bionic electrode, the limited distance between the cathode and the anode can be reduced to 1 mm, and the corresponding current density is enhanced 1.5 times as compared with the common condition. This Janus triangular electrode with dual directionality elucidates 3D smart bubble manipulation during overall water splitting and should offer a great opportunity to develop advanced electrochemical processes toward complicated environments such as confined space and zero gravity.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Yifan Li,Gaoqiang Yang,Shule Yu,Zhenye Kang,Jingke Mo,Bo Han,Derrick A. Talley,Feng-Yuan Zhang

DOI: https://doi.org/10.1016/j.ijhydene.2019.09.044

IF: 7.2

2019-01-01

International Journal of Hydrogen Energy

Abstract:The development of water electrolyzer is challenging as we approach theoretical limits arising from electrochemical reactions and micro-scale bubble dynamics. In this research, two-phase flow and bubble dynamics are in-situ studied in a special designed single-channel electrolyzer. The devices fabricated by a 3D printer provide a whole vision of the electrochemical reaction within the channel. In-situ observations of channel-scale hydrogen and oxygen micro-bubbles dynamics are conducted, and the whole process of hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs) are simultaneously studied. The results indicate that all bubbles generate at the interface between the proton exchange membrane and the electrode wire, and the operating conditions have a great impact on the micro bubble evolution process. The bubble detachment diameter is inversely proportional to the flow velocity, but is in direct proportion to the current density. Finally, a mathematic model has been developed, and shows a good agreement with experimental data. Those results could help to better understand the bubble evolution mechanism, in order to further understand the electrochemical reaction.
Influence of Bubbles on the Energy Conversion Efficiency of Electrochemical Reactors

Andrea Angulo,Peter van der Linde,Han Gardeniers,Miguel Modestino,David Fernández Rivas

DOI: https://doi.org/10.1016/j.joule.2020.01.005

2020-02-13

Abstract:Bubbles are known to influence energy and mass transfer in gas evolving electrodes. However, we lack a detailed understanding on the intricate dependencies between bubble evolution processes and electrochemical phenomena. This review discusses our current knowledge on the effects of bubbles on electrochemical systems with the aim to identify opportunities and motivate future research in this area. We first provide a base background on the physics of bubble evolution as it relates to electrochemical processes. Then we outline how bubbles affect energy efficiency of electrode processes, detailing the bubble-induced impacts on activation, ohmic and concentration overpotentials. Lastly, we describe different strategies to mitigate losses and how to exploit bubbles to enhance electrochemical reactions.

Soft Condensed Matter,Fluid Dynamics
Water Splitting: Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities (Adv. Energy Mater. 46/2020)

Tianyi Kou,Shanwen Wang,Rongpei Shi,Tao Zhang,Samuel Chiovoloni,Jennifer Q. Lu,Wen Chen,Marcus A. Worsley,Brandon C. Wood,Sarah E. Baker,Eric B. Duoss,Rui Wu,Cheng Zhu,Yat Li

DOI: https://doi.org/10.1002/aenm.202070189

IF: 27.8

2020-12-01

Advanced Energy Materials

Abstract:In article number <a href="https://doi.org/10.1002/aenm.202002955">2002955</a> Rui Wu, Cheng Zhu, Yat Li and co‐workers demonstrate a new approach for the deterministic design of 3D electrodes to minimize the deleterious effects of gas bubbles by carefully engineering porous highways and transport networks that facilitate rapid bubble transport and release to enhance the total electrode catalytic activity at commercially relevant current densities. 

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Recent progress of enhanced bubble separation in alkaline water electrolyzer

Lin Yang,Lingyu Gao,Guixuan Shan,Xinyi Huo,Mengfei Zhang,Yuxuan Wang,Xingyu Liu,Aiqun Kong,Jiangjiexing Wu,Jinli Zhang

DOI: https://doi.org/10.20517/cs.2023.25

2023-09-28

Chemical Synthesis

Abstract:Alkaline water electrolysis has a large industrial application and development potential in hydrogen energy owing to its high maturity and low cost. However, its moderate energy efficiency, especially caused by bubble effects, inhibits its use for large-scale hydrogen production. To overcome this shortcoming, this review first analyzes the bubble effect and summarizes the external operation methods, such as external field intensification, flow operation, fluctuation operation, and surfactant addition to the electrolyte, to enhance bubble separation in the electrolyzer. Then, electrode and flow channel structure optimization, particularly superhydrophilic and superaerophobic electrodes, and flow channels with varying heights, square column arrangements, and inlet/outlet numbers are highlighted. Finally, future research directions in alkaline water electrolysis technology are suggested to advance the industrial application of large-scale alkaline water electrolysis.
Paper versus electronic rating scales for pain assessment: a prospective, randomised, cross-over validation study with 200 chronic pain patients

U. Junker,R. Freynhagen,K. Längler,U. Gockel,U. Schmidt,T. Tölle,R. Baron,T. Kohlmann

DOI: https://doi.org/10.1185/03007990802121059

2008-05-15

Current Medical Research and Opinion

Abstract:ABSTRACT Objective: Following the recent introduction of hand-held computers to be used by patients instead of conventional pencil-and-paper questionnaires, a validation study under ’real-life‚ conditions was conducted, in order to compare these two clinical instruments when used by chronic pain patients to describe their pain using visual and numerical rating scales. Method: Each of 200 chronic pain patients attending a single physician's practice was given two pain questionnaires to complete, one on paper and one on a hand-held computer; completion of these took place directly before and after consultation, in randomised order. The questions asked in the two questionnaires were identical: present pain, average pain, worst pain and those of the painDETECT questionnaire (the latter distinguishes characteristic symptoms of nociceptive pain). In accordance with standard practice, the paper questionnaire used numerical rating scales and the electronic one employed visual analogue scales, with or without a numerical indicator. Results: Nearly all patients (99 % ) of the study population (58 % female; aged 57 ± 14 years) completed both questionnaires. In spite of the expected substantial intra-individual scatter, overall results from the two questionnaire types were highly consistent. Only a few differences of potential statistical significance (p < 5 % ) were observed, and none were found that would have led to different interpretations. No difference was seen between results from the electronic visual analogue scales with and without a numerical indicator. Conclusion: Under conditions of routine clinical practice, the hand-held computer questionnaire can give results equivalent to those obtained with the conventional paper questionnaire.
Designing electrocatalysts for seawater splitting: surface/interface engineering toward enhanced electrocatalytic performance

Bo Xu,Jie Liang,Xuping Sun,Xiaoli Xiong

DOI: https://doi.org/10.1039/d2gc03377a

2023-04-13

RSC Green Chemistry

Abstract:As an ideal large-scale energy conversion/storage technology, electrochemical hydrogen production is a great potential means of smoothing out the volatility of renewable sources. Electrocatalytic seawater splitting utilizes abundant natural seawater to replace purified water, which occupies considerable economic and environmental benefits, and will greatly expand the applications scope of water splitting. However, complex compositions existing in natural seawater hinder efficient H2 electrosynthesis, especially chlorides that corrode the catalysts. Advanced surface and interface engineerings have been demonstrated to be critical for the construction of efficient and stable electrodes for seawater electrolysis. In the review, we firstly introduce the fundamentals of direct seawater splitting and provides a comprehensive analysis of the basic reactions on electrodes from the perspective of thermodynamics and kinetics. Subsequently, rational design strategies for HER and OER electrocatalysts applied to seawater or chloride-containing electrolytes are discussed comprehensively in terms of catalytic activity, selectivity and corrosion resistance. Moreover, the applications of surface/interface engineering in the performance tuning of seawater electrolytic electrocatalysts are presented. Finally, the current state of the research is presented, along with potential areas for further innovation.
Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management.

Shusheng Wan,Huanlei Zhang,Ke Ye,Jieyang Li,Yucheng He,Xiaolin Ge,Tongwen Xu,Wen-Bin Cai,Meng Lin,Kun Jiang

DOI: https://doi.org/10.1021/acs.jpclett.3c02902

IF: 6.888

2023-01-01

The Journal of Physical Chemistry Letters

Abstract:This study systematically explores the impact of the anodic flow field design on the transport of O2 bubble and subsequent energy efficiency in electrolysis devices. Two distinct configurations, namely a conventional serpentine flow panel and an interdigitated flow panel, are integrated at the anode side of the electrolyzer. The interdigitated flow field exhibits superior performance in both alkaline water splitting and CO2 reduction despite the experience of an increased pressure drop. Numerical simulations reveal that the enhanced convective flow of the O2 bubbles induced by a forced anolyte flow through the porous electrode within the interdigitated panel design resulted in a 3 orders of magnitude increase in the level of the O2 bubble transport compared to the serpentine configuration. These findings not only underscore the significance of flow field design on bubble management but also provide a basis for advancing the electrolysis efficiency at industrial-level current densities.
Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting

Tianbiao Zeng,Binbin Guo,Zhiyao Xu,Funian Mo,Xiaoteng Chen,Liping Wang,Yihong Ding,Jiaming Bai

DOI: https://doi.org/10.1002/advs.202207495

IF: 15.1

2023-02-26

Advanced Science

Abstract:Inspired by the high efficiency of water/nutrient transport in the capillaries plants, a graphene‐based capillary array with side holes as catalyst support is designed to manage the bubble release and water supply via a Z‐axis controllable digital light processing (DLP) three‐dimensional (3D) printing technology, which overcomes the contradiction of bubble release/H2O flow in current 3D catalytic electrodes. Porous metal foams (e.g., Ni/Cu/Ti) are applied as catalyst supports extensively for water splitting due to their large specific area and excellent conductivity, however, intrinsic bubble congestion is unavoidable because of the irregular three‐dimensional (3D) networks, resulting in high polarization and degraded electrocatalytic performances. To boost the H2O decomposition kinetics, the immediate bubble removal and water supply sequential in the gas–liquid–solid interface is essential. Inspired by the high efficiency of water/nutrient transport in the capillaries plants, this work designs a graphene‐based capillary array with side holes as catalyst support to manage the bubble release and water supply via a Z‐axis controllable digital light processing (DLP) 3D printing technology. Like planting rice, a low‐cost, high‐active CoNi carbonate hydroxide (CoNiCH) is planted on support. A homemade cell can reach 10 mA cm−2 in 1.51 V, and be kept at 30 mA cm−2 for 60 h without noticeable degradation, surpassing most of the known cells. This research provides a promising avenue to design and prepare advanced catalysts in various fields, including energy applications, pollutant treatment, and chemical synthesis.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Electrocatalytic water splitting: Mechanism and electrocatalyst design

Han Wu,Qiaoxian Huang,Yuanyuan Shi,Jiangwei Chang,Siyu Lu

DOI: https://doi.org/10.1007/s12274-023-5502-8

IF: 9.9

2023-04-04

Nano Research

Abstract:Hydrogen energy, a new type of clean and efficient energy, has assumed precedence in decarbonizing and building a sustainable carbon-neutral economy. Recently, hydrogen production from water splitting has seen considerable advancements owing to its advantages such as zero carbon emissions, safety, and high product purity. To overcome the large energy barrier and high cost of water splitting, numerous efficient electrocatalysts have been designed and reported. However, various difficulties in promoting the industrialization of electrocatalytic water splitting remain. Further, as high-performance electrocatalysts that satisfy industrial requirements are urgently needed, a better understanding of water-splitting systems is required. In this paper, the latest progress in water electrolysis is reviewed, and experimental evidence from in situ/operando spectroscopic surveys and computational analyses is summarized to present a mechanistic understanding of hydrogen and oxygen evolution reactions. Furthermore, some promising strategies, including alloying, morphological engineering, interface construction, defect engineering, and strain engineering for designing and synthesizing electrocatalysts are highlighted. We believe that this review will provide a knowledge-guided design in fundamental science and further inspire technical engineering developments for constructing efficient electrocatalysts for water splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
[Intervention in the renin-angiotensin and kallikrein-kinin systems. Pharmacologic basis of the action of ACE inhibitors].

W. Linz,A. Busch

Pharmazie in unserer Zeit

Abstract:
Designing Self-Supported Electrocatalysts for Electrochemical Water Splitting: Surface/Interface Engineering toward Enhanced Electrocatalytic Performance

Peican Wang,Baoguo Wang

DOI: https://doi.org/10.1021/acsami.1c17448

2021-12-08

Abstract:Electrochemical water splitting is regarded as the most attractive technique to store renewable electricity in the form of hydrogen fuel. However, the corresponding anodic oxygen evolution reaction (OER) and cathodic hydrogen evolution reaction (HER) remain challenging, which exhibit complex reactions and sluggish kinetic behaviors at the triple-phase interface. Material surface and interface engineering provide a feasible approach to improve catalytic activity. Besides, self-supported electrocatalysts have been proven to be highly efficient toward water splitting, because of the regulated catalyst/substrate interface. In this Review, the state-of-the-art achievements in self-supported electrocatalyst for HER/OER have demonstrated the feasibility of surface and interface engineering strategies to boost performance. The six key effective surface/interface engineering approaches for rational catalysts design are systematically reviewed, including defect engineering, morphology engineering, crystallographic tailoring, heterostructure design, catalyst/substrate interface engineering, and catalyst/electrolyte interface regulation. Finally, the challenges and opportunities on the valuable directions are proposed to inspire future investigation of highly active and durable HER/OER electrocatalysts.

materials science, multidisciplinary,nanoscience & nanotechnology
Rational Design of Local Microenvironment for Electrocatalytic Water Splitting

Xiang Li,Wangchuan Zhu,Yanqun Zhang,Yueyue Zhao,Danjun Wang,Yanzhong Zhen,Feng Fu,Chunming Yang

DOI: https://doi.org/10.1039/d4qi00854e

IF: 7.779

2024-05-30

Inorganic Chemistry Frontiers

Abstract:Electrocatalytic water splitting reaction kinetics are usually determined by the intrinsic activity of electrocatalyst and the microenvironment at the electrode-electrolyte interface. Compared to electronic structure regulation based on intrinsic activity, manipulating the local microenvironment is more effective in accelerating internal reactions and transfer processes, we herein concentrate on the latest progress in the local microenvironment design for electrocatalytic water splitting. The development and characterization methods of the electric double layer structure model closely related to the microenvironment were first introduced. Next, the influence of electrode surface wettability, local pH, interface water structure, and electrolyte composition on the composition of interface reactants, key intermediate adsorption, and reaction kinetics was discussed in detail. Local microenvironment design strategies based on bubble engineering, local electric field, surface modification, interface water orientation/hydrogen bonding network, and electrolyte anion and cation distribution were subsequently proposed. Finally, we outlined the existing challenges and provided possible solutions to drive the future development of this emerging field.

chemistry, inorganic & nuclear
Next Generation Noble Metal‐Engineered Catalysts: From Structure Evolution to Structure‐Reactivity Correlation in Water Splitting

Yiming Zhang,Rui Yan,Xiaohui Xu,Chao He,Mi Zhou,Zhiyuan Zeng,Tian Ma,Mao Wang,Shuang Li

DOI: https://doi.org/10.1002/adfm.202308813

IF: 19

2023-10-22

Advanced Functional Materials

Abstract:The recent advancements in designing noble metal‐engineered catalysts (NMECs) for water electrolysis are systematically summarized, including structure evolution, microenvironment modulation, structure‐reactivity correlation, and new horizons. The fundamental advantages, evaluation methods, and strategies to modulate the catalytic sites of NMECs are thoroughly summarized. Particularly, the essence and mechanism of how NMECs affect their electrocatalytic performances are comprehensively discussed. Noble metal‐engineered catalysts (NMECs) play an important role in promoting the practical utilization of water‐splitting devices in hydrogen energy systems. While owing to the complicated catalytic centers, diverse support structures, and changing microenvironments, NMECs still face many challenges when it comes to designing and analyzing the precise catalytic sites and activity‐mechanism analyses, which are crucial for their future developments. Here, this cutting‐edge review systematically discusses recent advancements in designing NMECs for water electrolysis, including the structure evolution, microenvironment modulation, structure‐reactivity correlation, and new horizons. First, the fundamental advantages, mechanisms, and evaluation methods of NMECs for water splitting are outlined. Then, the strategies to modulate the catalytic microenvironments of NMECs are thoroughly summarized, such as crystal phase modulation, alloying effects, crystallization degrees, size effects, and substrate effects. In particular, there are valuable perspectives on bond interactions, theoretical calculations, and evaluation methods to disclose the catalytic mechanisms. Thereafter, a special emphasis is given on structure‐reactivity correlation, performances, and water‐splitting devices. Finally, a thorough discussion of the upcoming difficulties and new directions for developing next‐generation NMECs is presented. It is believed that the review will have a significant influence on creating noble metal‐based catalysts in the field of electrolytic water‐splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Review on Bubble Dynamics in Proton Exchange Membrane Water Electrolysis: Towards Optimal Green Hydrogen Yield

Bongliba T Sangtam,Hanwook Park,Bongliba T. Sangtam

DOI: https://doi.org/10.3390/mi14122234

IF: 3.4

2023-12-14

Micromachines

Abstract:Water electrolysis using a proton exchange membrane (PEM) holds substantial promise to produce green hydrogen with zero carbon discharge. Although various techniques are available to produce hydrogen gas, the water electrolysis process tends to be more cost-effective with greater advantages for energy storage devices. However, one of the challenges associated with PEM water electrolysis is the accumulation of gas bubbles, which can impair cell performance and result in lower hydrogen output. Achieving an in-depth knowledge of bubble dynamics during electrolysis is essential for optimal cell performance. This review paper discusses bubble behaviors, measuring techniques, and other aspects of bubble dynamics in PEM water electrolysis. It also examines bubble behavior under different operating conditions, as well as the system geometry. The current review paper will further improve the understanding of bubble dynamics in PEM water electrolysis, facilitating more competent, inexpensive, and feasible green hydrogen production.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Quantitative Description of Bubble Formation in Response to Electrolyte Engineering

Huihang Qiu,Keisuke Obata,Zhicheng Yuan,Takeshi Nishimoto,Yaerim Lee,Keisuke Nagato,Ikuya Kinefuchi,Junichiro Shiomi,Kazuhiro Takanabe

DOI: https://doi.org/10.1021/acs.langmuir.2c03488

IF: 3.9

2023-03-29

Langmuir

Abstract:The green hydrogen economy is expected to play a crucial role in carbon neutrality, but industrial-scale water electrolysis requires improvements in efficiency, operation costs, and capital costs before broad deployment. Electrolysis operates at a high current density and involves the substantial formation of gaseous products from the electrode surfaces to the electrolyte, which may lead to additional resistance and a resulting loss of efficiency. A detailed clarification of the bubble departure phenomena against the electrode surface and the surrounding electrolytes is needed to further control bubbles in a water electrolyzer. This study clarifies how electrolyte properties affect the measured bubble detachment sizes from the comparisons with analytical expressions and dynamic simulations. Bubble behavior in various electrolyte solutions and operating conditions was described using various physical parameters. A quantitative relationship was then established to connect electrolyte properties and bubble departure diameters, which can help regulate the bubble management through electrolyte engineering.

chemistry, multidisciplinary, physical,materials science

Effect of SNP at position 40237 in exon 7 of the TPH2 gene on susceptibility to suicide

Bubble evolution and transport in PEM water electrolysis: Mechanism, impact, and management

Revisited electrochemical gas evolution reactions from the perspective of gas bubbles

Integrated Catalyst-Substrate Electrodes for Electrochemical Water Splitting: A Review on Dimensional Engineering Strategy

Study of bubble evolution behavior on electrode surface based on lattice Boltzmann method

A Multi‐Bioinspired Dual‐Gradient Electrode for Microbubble Manipulation toward Controllable Water Splitting

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Influence of Bubbles on the Energy Conversion Efficiency of Electrochemical Reactors

Water Splitting: Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities (Adv. Energy Mater. 46/2020)

Recent progress of enhanced bubble separation in alkaline water electrolyzer

Paper versus electronic rating scales for pain assessment: a prospective, randomised, cross-over validation study with 200 chronic pain patients

Designing electrocatalysts for seawater splitting: surface/interface engineering toward enhanced electrocatalytic performance

Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management.

Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting

Electrocatalytic water splitting: Mechanism and electrocatalyst design

[Intervention in the renin-angiotensin and kallikrein-kinin systems. Pharmacologic basis of the action of ACE inhibitors].

Designing Self-Supported Electrocatalysts for Electrochemical Water Splitting: Surface/Interface Engineering toward Enhanced Electrocatalytic Performance

Rational Design of Local Microenvironment for Electrocatalytic Water Splitting

Next Generation Noble Metal‐Engineered Catalysts: From Structure Evolution to Structure‐Reactivity Correlation in Water Splitting

Review on Bubble Dynamics in Proton Exchange Membrane Water Electrolysis: Towards Optimal Green Hydrogen Yield

Quantitative Description of Bubble Formation in Response to Electrolyte Engineering