Abstract:Designing two-dimensional (2D) porous carbon nanosheets is expected to boost the water splitting efficiency of low-cost iron (Fe) and cobalt (Co)-based catalysts. Nevertheless, the aggregations, tedious preparation procedures, and expensive precursors for synthesizing 2D porous carbon nanosheets have hindered their widespread application. Herein, for the first time, we developed a low-cost method for large-scale and rapid synthesis of the three-dimensional (3D) hierarchically porous architectures self-assembled by the ultrafine FeCo nanoparticles embedded and boron/nitrogen-codoped 2D porous carbon nanosheets (denoted as FeCo@BNPCNS). The optimal FeCo@BNPCNS-900 exhibited abundant porous channels, a large surface area, and vast carbon edges/defects. Therefore, 8.10 at% electrochemically active boron (B)/nitrogen (N) centers were doped into the porous carbon nanosheets. In an alkaline solution, the optimal FeCo@BNPCNS-900 nanosheets revealed excellent hydrogen evolution reaction (HER) electrocatalytic activity, surpassing commercial 20 wt% Pt/C. For instance, the HER potential at 10 mA cm-2 [-50.6 mV vs. reversible hydrogen electrode (RHE)] of FeCo@BNPCNS-900 was even 19.3 mV more positive than that of commercial 20 wt% Pt/C (-69.9 mV vs. RHE). Meanwhile, its oxygen evolution reaction (OER) catalytic activity was just a little worse than ruthenium oxide (RuO2). The water electrolysis cell of FeCo@BNPCNS-900 nanosheets just required a small voltage of 1.589 V for full water splitting to achieve 10 mA cm-2, even 70.3 mV more negative than that of the state-of-the-art 20 wt% Pt/C||RuO2 benchmark (1.660 V) with outstanding stability. The perfect 3D hierarchically porous and honeycomb-like architecture, abundant porous channels/mesopores, and uniformly dispersed electrocatalytically active sites on FeCo@BNPCNS-900 nanosheets were responsible for the outstanding water splitting performance. Finally, this study provides an efficient strategy for the large-scale, rapid, and low-cost synthesis of 2D porous carbon nanosheets without using any template, surfactant, or expensive precursors.

Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting

Water Splitting: Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities (Adv. Energy Mater. 46/2020)

Stereolithgraphy of Metallic Electrode with Janus Porosity toward Controllable Bubble Behavior and Ultra‐Stable Water Electrolysis

Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities

3D Printed Microlattices of Transition Metal/Metal Oxides for Highly Stable and Efficient Water Splitting

A Multi‐Bioinspired Dual‐Gradient Electrode for Microbubble Manipulation toward Controllable Water Splitting

3D Holey Hierarchical Nanoflowers Assembled by Cobalt Phosphide Embedded N-doped Carbon Nanosheets As Bifunctional Electrocatalyst for Highly Efficient Overall Water Splitting

A self-supporting bifunctional catalyst electrode made of amorphous and porous CoP3 nanoneedle array: exhaling during overall water splitting

Three-dimensional self-supporting catalyst with NiFe alloy/oxyhydroxide supported on high-surface cobalt hydroxide nanosheet array for overall water splitting

Open-Microcolumn Array: A Novel Approach for Enhanced Electrocatalytic Bubble Desorption in Microreactors

Large-Scale, Low-Cost, and High-Efficiency Water-Splitting System for Clean H2 Generation.

CoP Microscale Prism-like Superstructure Arrays on Ni Foam as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Macroporous Array Induced Multiscale Modulation at the Surface/Interface of Co(OH) 2 /NiMo Self‐Supporting Electrode for Effective Overall Water Splitting

Tube‐Sponge‐Inspired hierarchical electrocatalysts with boosted mass and electron transfer for efficient oxygen evolution

A Freestanding 3D Heterostructure Film Stitched by MOF‐Derived Carbon Nanotube Microsphere Superstructure and Reduced Graphene Oxide Sheets: A Superior Multifunctional Electrode for Overall Water Splitting and Zn–Air Batteries

Interface Engineered Co, Ni, Fe, Cu Oxide Hybrids with Biphasic Structures for Water Splitting with Enhanced Activity

Cu Embedded in Co–P Nanosheets with Super Wetting Structure for Accelerated Overall Water Splitting under Simulated Industrial Conditions

Well-designed cobalt-nickel sulfide microspheres with unique peapod-like structure for overall water splitting

Superhydrophilic/superaerophobic NiFe with Internal Bubble Flow Channels for Electrocatalytic Water Splitting

Synergistic Tuning of CoO/CoP Heterojunction Nanowire Arrays as Efficient Bifunctional Catalysts for Alkaline Overall Water Splitting

Facile synthesis of ultrafine iron-cobalt (FeCo) nanocrystallite-embedded boron/nitrogen-codoped porous carbon nanosheets: Accelerated water splitting catalysts