Abstract:Alkaline water electrolysis has been operated on 100+ MW scale in the 20 th century powered by hydropower. Because of this history, the technology is often regarded as a mature technology with limited improvement potential that is less suitable for flexible operation. As a result most research efforts in the field of water electrolysis focus on other technologies such as PEM, solid oxide and AEM electrolysis. This is a pity, since alkaline electrolysis is very well positioned to be deployed on large-scale for the production of green hydrogen in the coming decades. Main reason is that in contrast to the other technologies, alkaline technology does not depend on scarce and/or expensive noble or rare earth metals. Also, the use of a diaphragm instead of a membrane makes the technology more robust. Yet, to enable the large-scale deployment of alkaline electrolysis for production of green hydrogen from renewable electricity certain technical challenges need to be overcome. These include safety challenges associated with rare scenarios where hydrogen and oxygen can mix, flexibility limitations associated with gas crossover limiting the minimum load of the plant, and durability challenges resulting from frequent shutdowns of electrolyzers. In principle all these challenges can be overcome by rigorous plant design and the selection of suitable diaphragm and electrode materials, but they do require research efforts. Next to that, there is room to significantly drive down the costs of green hydrogen produced by alkaline electrolyzers. Traditionally, alkaline electrolyzers have been operated at low current densities of 0.2-0.4 A cm -2 . This was related to the high ohmic drop associated with the use of thick diaphragms and non-zero-gap cell designs. Presently, advanced alkaline electrolyzers are under development that can operate at significantly higher current densities (~1 A cm -2 ) through the use of thinner diaphragms, zero-gap cell designs and improved electrode materials. Operation at these increased current densities increases the output of alkaline electrolyzers and in this way can effectively reduce the costs and footprint of water electrolysis plants. Yet, the use of thinner diaphragms and advanced electrodes also creates new challenges, since they can lead to increased gas crossover and vulnerability to impurities and reverse currents that occur upon the shutdown of electrolyzers. In this presentation the fundamentals of alkaline water electrolysis will be discussed. These include overpotentials and durability of electrode coatings, the role of electrolyte impurities, ohmic resistance, gas crossover through the diaphragm, the influence of operating temperature and pressure, the effect of bubbles, and the influence stray currents resulting from the manifold design. These fundamentals will be translated into a potential design for the perfect alkaline electrolyzer. Figure:alkaline electrolyzers operational in Norway in 1931. Source: Norsk Industriarbeidermuseum Figure 1

Recent progress of enhanced bubble separation in alkaline water electrolyzer

Mechanism analyses and optimization strategies for performance improvement in low-temperature water electrolysis systems via the perspective of mass transfer: A review

Investigation of the hydrogen bubble effect on the overpotential in an alkaline water electrolyzer

Advancing strategies on green H2 production via water electrocatalysis: bridging the benchtop research with industrial scale-up

Clean and Affordable Hydrogen Fuel from Alkaline Water Splitting: Past, Recent Progress, and Future Prospects

Enhanced production of hydrogen from alkaline electrolysis by microbubbles removal on bionic electrode

High‐Rate Alkaline Water Electrolysis at Industrially Relevant Conditions Enabled by Superaerophobic Electrode Assembly

Highly Efficient Alkaline Water Electrolysis Using Alkanolamine-Functionalized Zirconia-Blended Separators

Low-Temperature Water Electrolysis: Fundamentals, Progress, and New Strategies

A review of recent advances in alkaline electrolyzer for green hydrogen production: Performance improvement and applications

Electrochemical Water Splitting for Scale Hydrogen Production: From the Laboratory to Industrial Applications

Recent advances in anion exchange membrane technology for water electrolysis: a review of progress and challenges

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

Novel Water-Splitting Electrolyzer Design Incorporating a Gas Diffusion Electrode and a Gel Membrane for Highly Efficient Hydrogen Production

Recent Advances and Challenges in Anion Exchange Membranes Development/Application for Water Electrolysis: A Review

Recent advances of bifunctional electrocatalysts and electrolyzers for overall seawater splitting

Recent advances in electrocatalysts for neutral and large-current-density water electrolysis

Bubble Management for Electrolytic Water Splitting by Surface Engineering: A Review

(Invited) Challenges and Opportunities of Alkaline Water Electrolysis

Application of Hydrogen Spillover in Alkaline Hydrogen Evolution Reaction

Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management.