Abstract:This paper presents a detailed analysis of aluminium-doped zinc oxide (AZO) thin films and considers them a promising alternative to indium tin oxide in transparent electrodes. The study focusses on critical properties of AZO, including optical, electrical, and mechanical properties, with potential applications in displays, photovoltaic cells, and protective coatings. The deposited AZO thin films are characterised by excellent optical and electrical parameters, with transparency in the visible light range exceeding 80% and resistivity of 10-3 Ω·cm, which gives a high value of figure of merit of 63. Structural analysis confirms the nanocrystalline nature of as-deposited AZO thin films, featuring hexagonal ZnO, orthorhombic Al2O3, and cubic Al2ZnO4 phases. The study includes nanoindentation measurements, which reveal exceptional hardness (11.4 GPa) and reduced elastic modulus (98 GPa), exceeding typical values reported in the literature, highlighting their protective potential. Abrasion tests have shown extraordinary scratch resistance due to the lack of impact on topography and surface roughness up to 10,000 cycles. This comprehensive study demonstrated that as-deposited AZO thin films are multifunctional materials with exceptional optical, electrical, and mechanical properties. The findings open up possibilities for a variety of applications, especially in protective coatings, where the combination of hardness, scratch resistance, and transparency is both rare and valuable.

Characterization of AZO and Ag based films prepared by RF magnetron sputtering

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Infrared reflective properties of AZO/Ag/AZO trilayers prepared by RF magnetron sputtering

Fabrication and Properties of Transparent Conductive AZO/Cu Bilayer Films

Highly transparent and infrared reflective AZO/Ag/AZO multilayer film prepared on PET substrate by RF magnetron sputtering

Synthesis of high-quality AZO polycrystalline films via target bias radio frequency magnetron sputtering

Textured Surface Aluminum-Doped Zinc Oxide Thin Films Prepared by Direct Current Magnetron Sputtering

Properties and preparation of ZAO/metal/ZAO transparent conducive multilayer films

Effect of the ZnO buffer layer thickness on AZO film properties

A Comprehensive Investigation of the Mechanical and Tribological Properties of AZO Transparent Conducting Oxide Thin Films Deposited by Medium Frequency Magnetron Sputtering

Effects of DC Sputtering Power on the Properties of AZO Films Deposited at Room Temperature for CIGS Photovoltaics

Properties of transparent conductive ZnO:Al thin films prepared by magnetron sputtering

High optoelectronic quality of AZO films grown by RF-magnetron sputtering for organic electronics applications

Transparent conductive and near-infrared reflective Cu-based Al-doped ZnO multilayer films grown by magnetron sputtering at room temperature

Versatile r.f. magnetron sputtering doping method to produce aluminum‐doped zinc oxide films

Study on the Preparation of ZYO Thin Films by Middle Frequency Alternative Magnetron Sputtering and Their Properties

Investigation of ZnO∶Al Thin Films Deposited by RF Magnetron Sputtering

Radio frequency magnetron sputtering deposition of low-resistivity and broad-spectral transmission F and Al co-doped ZnO film with mobility exceeding 50 cm2 V−1 s−1

Preparation and Characterization of Al-doped ZnO Films and the Properties of the Composite Films with Ferroelectric Films

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications