Abstract:Virtual track trains are a new type of rail transportation because the multisection formation structure leads to more degrees of freedom of the vehicle, which may cause unstable phenomena, such as tailing, cross-swing, and folding, affecting the stability and ride comfort of the vehicle driving. To explore the effect of damping coefficient of the articulated systems on vehicle dynamics performance, a vehicle system dynamics model is established based on the actual parameters of a three-module six-axle virtual track train. According to ISO14791: 2000, select typical working conditions such as straight line, lane change, and 1/4 circle curve, and optimize the damping coefficient of the articulated systems through co-simulation. The study shows that under straight-line conditions, increasing the damping coefficient can effectively suppress the yaw angular acceleration and improve the lateral ride comfort of the vehicle but has little effect on the vertical ride comfort. Under lane change conditions, too large or small damping coefficients will deteriorate the train’s lateral stability, and a reasonable damping coefficient will improve the yaw damping ratio of the vehicle and reduce the lateral sway vibration between vehicles. Under the 1/4 circle curve conditions, the additional articulated system damper will reduce the vehicle’s curve passing performance. In this paper, the articulation stability of multimodule fully connected vehicles is analyzed and optimized for the first time, and the damping coefficient control strategy is given based on the geometric tracking control method. The research results are of great significance for the parameter selection of virtual track trains’ articulated system and the design and development of specialized articulated systems for related vehicles.

Modelling and simulation of nonlinear dynamic characteristics of yaw dampers subjected to variable temperature operation condition of high-speed trains

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

The effect of yaw damper performance degradation on carbody hunting of high-speed trains

Dynamics simulation of a high-speed railway car operating in low-temperature environments with stochastic parameters

Improving the stability of high-speed trains using an innovative passive yaw damper

Linear stability analysis of a high-speed rail vehicle concerning suspension parameters variation and active control

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains

Experimental and numerical research on the bogie hunting of a high-speed train caused by the empty stroke of yaw damper

Bifurcation and stability analysis of a high-speed rail vehicle with active yaw dampers

Numerical Investigation into the Critical Speed and Frequency of the Hunting Motion in Railway Vehicle System

Effect of an inter-vehicle damper on the dynamics of a high-speed train

Dynamic response of high-speed trains under uneven temperature fields of slab tracks on cable-stayed bridges

Dynamics of a High-Speed Railway Wheelset with Two Time Delays in Primary Suspension Dampers

Rail Vehicle Dynamic Response to A Nonlinear Physical 'In-Service' Model of Its Secondary Suspension Hydraulic Dampers

Suspension parameter optimization for high-speed train with severe tread wear

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Hunting stability and dynamic stress analysis of a high-speed bogie using elastic-suspended motors as dynamic vibration absorber

Damping Coefficient Optimization for the Articulated System of Virtual Track Trains

Optimisation of an inter-vehicle damper for a high-speed train

Dynamic Modeling of the Electrical Actuation System of the Hypersonic Aircraft Considering the Temperature Effects

Application and Dynamics of MR Damper in the Secondary Suspension System of High Speed Trains