Abstract:With the rapid development of high-speed railway (HSR) in China, the problem of environmental vibration induced by HSR train has attracted critical concern. In this paper, a combination vibration reduction (CVR) strategy of hollow-closed-wall in-filled trench (HIT) and elastic bearing (EB) is proposed to decrease environmental vibration induced by HSR train, in which the depth of HIT could be well controlled to benefit the practical construction and economic cost. Based on the multi-body dynamics and finite element theory, HSR environmental vibration system is established and then divided into two sub-models including the 'train-track-bridge' vibration source sub-model and the 'pile-soil' vibration propagation sub-model. The two sub-models are connected via the force balance condition of the pier bottom. The verification of numerical models is conducted by comparing with the empirical formula and the ground data in the references. Then the attenuation law of environmental vibration is analyzed, and the vertical component is shown to be dominant in the HSR environmental vibration. On this basis, numerical simulations are performed to analyze the environmental vibration reduction under three strategies, namely the HIT, EB, and CVR. The results show that the HIT presents a distinct vibration reduction effect in the frequency range above 4 Hz and the vibration reduction becomes more obvious as the HIT's depth increases. However, the depth should be larger than 8 m to satisfy the code requirement; the EB presents an obvious reduction in the frequency range above 8 Hz; the CVR strategy not only further decrease the environmental vibration, but also effectively reduce the HIT's depth. By numerical analysis, the combination strategy of 6 m deep HIT and 2200 kN/mm vertical stiffness EB is recommended in the HSR environmental vibration reduction, which could also satisfy the limit of Chinese railway code.

Optimisation of an inter-vehicle damper for a high-speed train

Effect of an inter-vehicle damper on the dynamics of a high-speed train

Multibody system dynamics modelling and simulation of a high-speed train for its suspension optimization

Improving the stability of high-speed trains using an innovative passive yaw damper

A hybrid damping control strategy for high-speed trains running on existing tracks

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

Experimental and numerical research on the bogie hunting of a high-speed train caused by the empty stroke of yaw damper

Damping Coefficient Optimization for the Articulated System of Virtual Track Trains

A smart solution for improving ride comfort in high-speed railway vehicles

Analysis on new semi-active control strategies to reduce lateral vibrations of high-speed trains by simulation and hardware-in-the-loop testing

The effect of yaw damper performance degradation on carbody hunting of high-speed trains

Design and Performance Analysis of the Hydropneumatic Suspension System for a Novel Road-Rail Vehicle

Parameters optimum of multiple underframe suspended equipment on high-speed railway vehicle carbody vibration control by using an improved genetic algorithm

Effect of wind speed variation on the dynamics of a high-speed train

Experimental investigations on the semi-active control of a valve-driven secondary lateral damper for a high-speed rail vehicle

Optimization on the Crosswind Stability of Trains Using Neural Network Surrogate Model

Improving the track friendliness of a four-axle railway vehicle using an inertance-integrated lateral primary suspension

Analysis and control of high-speed train lateral vibration on the basis of a conditionally triggered model predictive control strategy

Modeling and Second-Order Sliding Mode Control for Lateral Vibration of High-Speed Train With MR Dampers