Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Micro-electro-discharge machining (micro-EDM) is a well-known micromachining method to create microstructures on hard-to-cut materials. To further exploit the capability of micro-EDM, the present research work investigates the effect of various important micro-EDM process parameters on the material removal rate (MRR), tool wear rate (TWR), and overcut (OC) during micro-cavity machining of M2-hardened die-steel. A Taguchi experimental design was used to study the effects of three process parameters namely pulse-on-time (Ton), peak current (Ip), and gap voltage (Vg). The experimental results showed that the most influencing process parameter in the present experimental investigation is peak current, Ip followed by pulse-on-time, Ton and gap voltage, Vg. Furthermore, a recent and effective method i.e. Measurement of Alternatives and Ranking according to COmpromise Solution (MARCOS) has been successfully employed to determine optimal process parametric combination for micro-EDM process to achieve maximum MRR and minimum TWR and OC during machining of micro-cavity on M2-hardened die-steel. From the present research investigation, the optimal micro-EDM process parametric combinations obtained for higher MRR, lower TWR and OC are found as 1 A of peak current, 30 μs pulse-on time and gap voltage of 60 V. Furthermore, through various scanning electron microscope micrographs of micro-cavities and micro-machined surfaces, analysis has been done to find out the micro-cavity with best geometrical accuracy and surface feature to validate the best and most ideal combinations of micro-EDM input parameters for micromachining operations. The results of this study show that micro-EDM is a promising process for machining M2-hardened die-steel. The optimization of process parameters using the MARCOS methodology can further improve the machining efficiency and accuracy of micro-EDM.

Editorial for the Special Issue on Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications, Volume II

Editorial for the Special Issue on Advances in Micro and Nano Manufacturing: Process Modeling and Applications, Volume II

Editorial for the Special Issue on Ultra Precision Technologies for Micromachining, Volume II

Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect

Editorial for the Special Issue on AC Electrokinetics in Microfluidic Devices, Volume II

Advances in micro electro discharge machining of biomaterials: a review on processes, industrial applications, and current challenges

Investigation of micro-electro-discharge machining process parameters during machining of M2 hardened die-steel

Machinability of different cutting tool materials for electric discharge machining: A review and future prospects

Research on the Key Technologies of Micro Electro Discharge Machining

An overview to micro-wire-electrical discharge machining

Micro-electrical discharge machining of difficult-to-machine materials: A review

Study on the Electrical and Geometrical Parameters of Micro Electrical Discharge Machining

Editorial for the Special Issue on Advances in Ultra-Precision Machining Technology and Applications

Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes

Editors' Choice—Improving Quality of EDMed Micro-Holes on Titanium via In Situ Electrochemical Post-processing: A Transient Simulation and Experimental Study

Research of micro-EDM and its applications

Advancements of Micro-Edm

Optimizing micro-EDM with carbon-coated electrodes: A multi-criteria approach

Research on a Micro-EDM System and Its Techniques

Review—Electrochemical Discharge Machining: Gas Film Electrochemical Aspects, Stability Parameters, and Research Work

Study on Micro Reversible Electrical Discharge Machining Method for the Fabrication of Micro Structures