Abstract:Fully autonomous operation has long been an ultimate goal in environmental sensing. Although self-powered gas sensors based on energy harvesting have been widely reported to provide power for autonomous operation, these sensors rely on external sources of harvestable energy, thus are not completely self-sufficient. Herein, a battery-sensor hybrid device that can simultaneously function as both a power source and a gas sensor is presented. The battery-sensor consists of a cathode that reduces NO2 to NO2– via a catalyst with Fe–Nx species distributed on highly graphitic porous nitrogen-doped carbon. On the basis of the efficient and selective electrocatalytic activity of the catalyst, the battery-sensor is capable of sensing NO2 and does so without any external power, overcoming the long-standing grand challenge to achieve complete energy self-sufficiency. Furthermore, through controlling the working current the sensing range can be significantly expanded and electronically tuned, which is not only unprecedented for gas sensors but also of remarkable commercial practicality. The proposed battery-sensor hybrid architecture represents a new paradigm toward sensors with complete energy self-sufficiency.(PDF). (MP4). The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c09255.Comparison table of NO2 gas sensors; SEM images of the cathode and anode; structure and optical image of PANa hydrogel; open-circuit voltage of the device in air and NO2; schematic of the custom-built gas testing system; background noise determination; water retention of the solid-state electrolyte; schematic of the bending test; gas response under bending, compression and cutting states; experimental setup for in situ reaction product extraction; UV–vis spectra for determining the reaction products of NO2–, NO3–, and NH4+ during the gas sensing process; UV–vis spectra for determining the reaction of NO2 in the electrolyte during the sensing process; UV–vis spectra for determining the NH4+ concentration derived from the reaction of Zn and NO2– in KOH solution; UV–vis absorption spectra, and standard calibration curve of different concentrations of NH4+, NO2–, and NO3–, respectively (PDF)Demonstration of NO2 gas sensing prototype (MP4)This article has not yet been cited by other publications.

A Self-Powered Portable Nanowire Array Gas Sensor for Dynamic NO2 Monitoring at Room Temperature

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Self-powered Gas Sensor Based on SiNWs/ITO Photodiode

Highly Integrated in Situ Photoenergy Gas Sensor with Deep Ultraviolet LED

A Photovoltaic Self‐Powered Gas Sensor Based on All‐Dry Transferred MoS 2 /GaSe Heterojunction for ppb‐Level NO 2 Sensing at Room Temperature

Ultrasensitive Indium Phosphide Nanomembrane Wearable Gas Sensors

Self-assembled Peptide Nanotubes (spnts)/sno2 Nanocomposites for High-Performance NO2 Sensing at Room Temperature

Temperature‐Modulated Selective Detection of Part‐per‐Trillion NO2 Using Platinum Nanocluster Sensitized 3D Metal Oxide Nanotube Arrays

A Self‐Powered, Rechargeable, and Wearable Hydrogel Patch for Wireless Gas Detection with Extraordinary Performance

Improving Sensitivity of Self-Powered Room Temperature NO2 Sensor by Triboelectric-Photoelectric Coupling Effect

Carbon Nanotube-Silicon Nanowire Heterojunction Solar Cells with Gas-Dependent Photovoltaic Performances and Their Application in Self-Powered NO 2 Detecting

Development of High-Precision NO2 Gas Sensor Based on Non-Dispersive Infrared Technology

Battery-Sensor Hybrid: A New Gas Sensing Paradigm with Complete Energy Self-Sufficiency

Sprayed, Scalable, Wearable, and Portable NO2 Sensor Array Using Fully Flexible AgNPs-All-Carbon Nanostructures.

Rapid and wide-range detection of NO x gas by N-hyperdoped silicon with the assistance of a photovoltaic self-powered sensing mode.

Engineering SnO2 Nanorods/ethylenediamine-Modified Graphene Heterojunctions with Selective Adsorption and Electronic Structure Modulation for Ultrasensitive Room-Temperature NO2 Detection.

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

High‐Performance Optoelectronic Gas Sensing Based on All‐Inorganic Mixed‐Halide Perovskite Nanocrystals with Halide Engineering

Self-powered room temperature NO2 detection driven by triboelectric nanogenerator under UV illumination

A Low-cost, Low-power, and Practical Nano-heterojunction Pollution Gas Sensor Based on Accurate Dielectrophoresis Technology

A Self-Powered UV Photodetector Based on the Hydrovoltaic and Photoelectric Coupling Properties of ZnO Nanowire Arrays