Abstract:Understanding the fracture behaviour of a material is essential for the sustainable design of structural components. The complex nature of microscale mechanical testing techniques makes identifying the fracture behaviour experimentally challenging at a microscopic scale. Validating microscale simulations with experimental studies can be difficult using traditional experimental techniques. High-resolution digital image correlation combined with electron backscatter diffraction describes the total in-plane deformation field at a microstructural scale, which can be compared against finite element models for verification. The present study determines the in-plane strain distribution ahead of a plastically deforming crack during an in-situ experiment. A crystal plasticity-based finite element model is used to simulate the experimental crack tip behaviour, after which quantitative and qualitative comparisons are made. A concentration of normal strains ahead of the crack tip is observed in both experimental and simulated results, defining the fracture process zone. Slip localization behaviour around the crack is also evaluated using Schmid factor analysis. A good correlation between the experimental slip bands and theoretical predictions has been observed. The strain path dependence on slip activation is also identified. Strain localization in deforming zirconium is initially limited with dense and low-intensity slip occurring up to a maximum in-plane shear strain of 0.2. Formation of well-defined equidistant slip bands occurs with further deformation. Equidistant slip bands are observed for prismatic <a> and pyramidal <c+a> slip systems, having an interplane distance of ∼0.60±0.05 µm and ∼0.46±0.04 µm, respectively.

Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement

Strain Field Around Individual Dislocations Controls Failure

Crack-tip strain field mapping and the toughness of metallic glasses

Intermitted 3D diffraction tomography combined with in situ Laue diffraction to characterize dislocation structures and stress fields in micro bending cantilevers

Effects of Dislocation Configuration, Crack Blunting and Free Surfaces on the Triggering Load of Dislocation Sources

In Situ SEM Observation of Microscale Strain Fields Around a Crack Tip in Polycrystalline Molybdenum

Dislocation shielding and crack tip decohesion at the atomic scale

Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading

Near-tip Strain Evolution and Crack Closure of Growing Fatigue Crack under a Single Tensile Overload

Effects of crack tip geometry on dislocation emission and cleavage: A possible path to enhanced ductility

Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium

Observing the crack tip behaviour at the nanoscale during fracture of ceramics

Precise Measurement of Activation Parameters for Individual Dislocation Nucleation During in Situ Tem Tensile Testing of Single Crystal Nickel

Stress state dependence of ductile damage and fracture behavior: Experiments and numerical simulations

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

In situ observation of crack propagation in lamellar TiAl/Ti3Al structure

In-situ X-ray Microscopy of Crack-Propagation to Study Fracture Mechanics of On-Chip Interconnect Structures

Deformation Fields Measurement of Crack Tip under High-Frequency Resonant Loading Using a Novel Hybrid Image Processing Method

The influence of surface stress on dislocation emission from sharp and blunt cracks in f.c.c. metals

Crack Tip Dislocation Emission and Nanoscale Deformation Fields in Silicon

Strain localization in a nanocrystalline metal: Atomic mechanisms and the effect of testing conditions