Abstract:In this work, molecular dynamics simulation and linear elastic fracture mechanics were employed to analyze the crack-tip behavior of a Mode I crack in nanocrystalline titanium. The effects of crystalline orientation, twin boundary and stacking fault on crack propagation were taken into account. Simulation results demonstrate that the crack-tip behavior and thus the crack propagation mode strongly depend on crystalline orientations and plane defects. Cracks lying on the hexagonal close-packed basal plane, the prismatic plane, or along a stacking fault plane defect propagate in a brittle manner, without involving proper dislocation emissions and twin nucleations in the crack-tip vicinity. In contrast, cracks show a ductile propagation behavior when aligned along the pyramidal plane, the {10 (1) over tilde2} plane, or the {10 (1) over bar2} <(1) over bar 011 > twin boundary. For these cases, local crack-tip plasticity and crack-tip reconstructions are found to play significant roles. The impact of strain rate on the crack-tip behavior of a basal crack was also investigated in detail. Five strain rates varied between 10(9) s(-1) and 10(10) s(-1) were considered. With increased strain rates, a brittle-to-ductile transition was clearly observed for crack propagation. The desired transition can be attributed to the high stress and energy concentrations near the crack-tip under elevated strain rates, leading to the successive emission and propagation of partial dislocations. To verify and validate the simulation results, a theoretical analysis on the competition between brittle and ductile crack propagations was also implemented. The theoretical predictions based on the linear elastic fracture mechanics were found to reasonably agree with the simulation results. The observations and conclusions deduced from the combined modeling and theoretical study are helpful to the better understanding of fracture mechanics in nanocrystalline titanium.

Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium

Crack Propagation Path Selection and Plastic Deformation at a Crack Tip in Zirconium

Microcrack Initiation Behavior Around Film Cooling Holes in a Ni-based Single Crystal: in Situ Observation and Crystal Plastic Analysis

Simulation of Ductile Fracture of Zirconium Alloys Based on Triaxiality Dependent Cohesive Zone Model

Strain Field Around Individual Dislocations Controls Failure

Crack Growth in Zirconium Single Crystal under Cyclic Loading: A Molecular Dynamics Simulation

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

Effects of Crystalline Orientation, Twin Boundary and Stacking Fault on the Crack-Tip Behavior of a Mode I Crack in Nanocrystalline Titanium

In Situ SEM Observation of Microscale Strain Fields Around a Crack Tip in Polycrystalline Molybdenum

Crack growth on the basal plane in single crystal zinc: experiments and computations

Micro-scale mechanism for cyclic deformation behavior in Zirconium under low-cycle-fatigue loading

Characterisation of slip and twinning in high rate deformed zirconium with electron backscatter diffraction

Quantitative characterization of short fatigue crack and grain boundary interaction behavior in zirconium

How can machine learning be used for accurate representations and predictions of fracture nucleation in zirconium alloys with hydride populations?

An Incremental Analysis of Plane Strain Fully Plastic Crack Growth in Strain-Hardening Materials under Extension

Understanding plasticity in zirconium using in-situ measurement of lattice rotations

In-situ SEM investigation of sub-microscale deformation fields around a crack-tip in silicon

Phase transformation and incompatibility at grain boundaries in zirconia-based shape memory ceramics: a micromechanics-based simulation study

Plastic Strain Accommodation and Crack Initiation in a Randomly-Oriented Mg-8y-1zr Magnesium Alloy During Accumulated Tensile Deformation

Studying the Damage Evolution and the Micro-Mechanical Response of X8CrMnNi16-6-6 TRIP Steel Matrix and 10% Zirconia Particle Composite Using a Calibrated Physics and Crystal-Plasticity-Based Numerical Simulation Model

Secondary slip of screw dislocations in zirconium