Abstract:Flexible humidity sensors with high sensitivity, fast response time, and outstanding reliability have the potential to revolutionize electronic skin, healthcare, and non-contact sensing. In this study, we employed a straightforward nanocluster deposition technique to fabricate a resistive humidity sensor on a flexible substrate, using molybdenum oxide nanoparticles (MoO x NPs). We systematically evaluated the humidity-sensing behaviors of the MoO x NP film-based sensor and found that it exhibited exceptional sensing capabilities. Specifically, the sensor demonstrated high sensitivity (18.2 near zero humidity), a fast response/recovery time (1.7/2.2 s), and a wide relative humidity (RH) detection range (0–95%). The MoO x NP film, with its closely spaced granular nanostructure and high NP packing density, exhibited insensitivity to mechanical deformation, small hysteresis, good repeatability, and excellent stability. We also observed that the device exhibited distinct sensing kinetics in the range of high and low RH. Specifically, for RH > 43%, the response time showed a linear prolongation with increased RH. This behavior was attributed to two factors: the higher physical adsorption energy of H2O molecules and a multilayer physical adsorption process. In terms of applications, our sensor can be easily attached to a mask and has the potential to monitor human respiration owing to its high sensing performance. Additionally, the sensor was capable of dynamically tracking RH changes surrounding human skin, enabling a non-contact sensing capability. More significantly, we tested an integrated sensor array for its ability to detect moisture distribution in the external environment, demonstrating the potential of our sensor for contactless human–machine interaction. We believe that this innovation is particularly valuable during the COVID-19 epidemic, where cross-infection may be averted by the extensive use of contactless sensing. Overall, our findings demonstrate the tremendous potential of MoO x NP-based humidity sensors for a variety of applications, including healthcare, electronic skin, and non-contact sensing.

Research Report on the Application of MEMS Sensors Based on Copper Oxide Nanofibers in the Braking of Autonomous Vehicles

MXene/MWCNT Electronic Fabric with Enhanced Mechanical Robustness on Humidity Sensing for Real-Time Respiration Monitoring

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

Humidity Sensing Properties of the Composite of Electrospun Crosslinked Polyelectrolyte Nanofibers Decorated with Ag Nanoparticles

Sensitive Humidity Sensors Based on Ionically Conductive Metal-Organic Frameworks for Breath Monitoring and Non-Contact Sensing

Brake Fluid Condition Monitoring by a Fiber Optic Sensor Using Silica Nanomaterials as Sensing Components

Ultra-high Performance Humidity Sensor Enabled by a Self-Assembled CuO/Ti3C2TX MXene

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

Highly Sensitive Humidity Sensors Based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers

High-Performance Flexible Humidity Sensor Based on MoO x Nanoparticle Films for Monitoring Human Respiration and Non-Contact Sensing

Cellulose nanofiber/MXene/AgNWs composite nanopaper with mechanical robustness for high-performance humidity sensor and smart actuator

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

Author Response for "electrospun Nanofibers-Based Humidity Sensors: Materials, Devices, and Emerging Applications"

Interlayer Cross-Linked Mxene Enables Ultra-Stable Printed Paper-Based Flexible Sensor for Real-Time Humidity Monitoring

Superhydrophilic, Underwater Superoleophobic, and Highly Stretchable Humidity and Chemical Vapor Sensors for Human Breath Detection.

Ultrafast Self-Assembly MoS2/Cu(OH)2 Nanowires for Highly Sensitive Gamut Humidity Detection with an Enhanced Self-Recovery Ability.

Patterned, flexible, self-supporting humidity sensor with core-sheath structure for real-time sensing of human-related humidity

Structural Optimization of Polyimide-Film Humidity Sensors for New Energy Vehicles

MOF/PDMS Hybrid Nanofilm-based QCM for VOC Selective Virtual Sensing in High-Humidity Environments

Cellulose nanofibers-based composite film with broadening MXene layer spacing and rapid moisture separation for humidity sensing and humidity actuators

Carrageenan-modified MXene Nanocomposite-Based All-Printed Flexible Humidity Sensor for Healthcare Application