Abstract:Steel corrosion is the major form of failure of durability of concrete structures. The durability monitoring for concrete structure and its repair research are two urgent and necessary tasks, and the former provides the basis for the latter. For concrete durability monitoring, with the development of corrosion processes, environmental factors in the concrete (saturation, temperature, and so on) and the corrosion rate changing will have an effect on steel corrosion polarization dynamics. This paper reviewed some widely used foreign durability monitoring sensors for the reinforced concrete, and discussed the negative and positive aspects of them. Also, this paper introduced some newly developed domestic sensors which may be more suitable used in extra high-humidity and low-humidity environment. For concrete durability restoration, the improvement of technique for reinforced concrete structure durability can be considered from three aspects "prevention", "resistance" and "treatment". As to the "treatment", electrochemical rehabilitation is regarded as the only effective method to stop steel corrosion. This paper reviewed the traditional repair and electrochemical method for the reinforced concrete, and introduced cathodic protection, realkalisation of reinforced concrete, electro-deposition method, electrochemical chloride extraction (ECE) and electro-migration anticorrosion technology. The effect and principle of these method were discussed. Most importantly, this paper put out the concept of bi-directional electro-migration rehabilitation (BIEM), and introduced the principle, research state and technical difficulties of BIEM.

Degradation of Reinforced Concrete Construction of Bridge Structures: Corrosion Aspect

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Simplified Structural Deterioration Model for Reinforced Concrete Bridge Piers under Cyclic Loading 1

THE INFLUENCES OF CORROSION DAMAGE ON THE FATIGUE CRACK DEVELOPMENT OF CONCRETE STRUCTURES

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Corrosion Processes on Weathering Steel Bridges Influenced by Deposition of De-Icing Salts

Analytical Review of Conductive Coatings, Cathodic Protection, and Concrete

Electrochemical Study on Corrosion Resistance of Epoxy- Coated Reinforcing Steel in Bridge Concrete

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

The Influence of Corrosion Processes on the Degradation of Concrete Cover

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

Analysis and strengthening of superstructure diseases of concrete bridges in China

Corrosion Fatigue Damages of Rebars under Loading in Time

Applicability Study on Accelerated Corrosion Methods of Steel Bars in Concrete Structure

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Behavior of Weathering Steel in Artificial Harsh Environment

State-of-art of the Mechanical Behaviour of the Corrosion Reinforced Concrete Bridges