Abstract:For the efficient and reliable operation of automated machining processes, the implementation of suitable tool condition monitoring (TCM) strategy is required. Various monitoring systems, utilising sophisticated signal processing techniques, have been widely researched for a number of different processes. Most monitoring systems developed up to date employ force, acoustic emission and vibration, or a combination of these and other techniques with a sensor integration strategy. With this work, the implementation of a monitoring system utilising simultaneous vibration and strain measurements on the tool tip, is investigated for the wear of synthetic diamond tools which are specifically used for the manufacturing of aluminium pistons. Contrary to many of the earlier investigations, this work was conducted in a manufacturing environment, with the associated constraints such as the impracticality of direct measurement of the wear. Data from the manufacturing process was recorded with two piezoelectric strain sensors and an accelerometer, each coupled to a DSPT Siglab analyser. A large number of features indicative of tool wear were automatically extracted from different parts of the original signals. These included features from the time and frequency domains, time-series model coefficients (as features) and features extracted from wavelet packet analysis. A correlation coefficient approach was used to automatically select the best features indicative of the progressive wear of the diamond tools. The self-organising map (SOM) was employed to identify the tool state. The SOM is a type of neural network based on unsupervised learning. A near 100% correct classification of the tool wear data was obtained by training the SOM with two independent data sets, and testing it with a third independent data set.

An effective sensor for tool wear monitoring in face milling: Acoustic emission

A brief review: acoustic emission method for tool wear monitoring during turning

In situ monitoring of FDM machine condition via acoustic emission

Identification of tool wear using acoustic emission signal and machine learning methods

Analysis of Spindle AE Signals and Development of AE-Based Tool Wear Monitoring System in Micro-Milling

Tool wear monitoring of micro-milling operations

Tool wear evaluation under minimum quantity lubrication by clustering energy of acoustic emission burst signals

Machine learning coupled with acoustic emission signal features for tool wear estimation during ultrasonic machining of Inconel 718

Sensitivity of acoustic emission signals features to cutting parameters in time domain: case of milling aeronautical aluminium alloys

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

In Situ Measurement of the Machining State in Small-Diameter Drilling by Acoustic Emission Sensing

Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Optimizing tool life in SiCp/Al composites milling with acoustic emission analysis: A comprehensive monitoring and implementation strategy

Tool wear monitoring based on the combination of machine vision and acoustic emission

Real-time estimation of machine cutting tool wear

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Vibration-based tool wear monitoring using artificial neural networks fed by spectral centroid indicator and RMS of CEEMDAN modes

Process Monitoring in Precision Cylindrical Traverse Grinding of Slender Bar Using Acoustic Emission Technology

Novel sensor-based tool wear monitoring approach for seamless implementation in high speed milling applications

Tool-wear monitoring in machine turning

Tool condition monitoring in micro milling of brittle materials