Abstract:For the efficient and reliable operation of automated machining processes, the implementation of suitable tool condition monitoring (TCM) strategy is required. Various monitoring systems, utilising sophisticated signal processing techniques, have been widely researched for a number of different processes. Most monitoring systems developed up to date employ force, acoustic emission and vibration, or a combination of these and other techniques with a sensor integration strategy. With this work, the implementation of a monitoring system utilising simultaneous vibration and strain measurements on the tool tip, is investigated for the wear of synthetic diamond tools which are specifically used for the manufacturing of aluminium pistons. Contrary to many of the earlier investigations, this work was conducted in a manufacturing environment, with the associated constraints such as the impracticality of direct measurement of the wear. Data from the manufacturing process was recorded with two piezoelectric strain sensors and an accelerometer, each coupled to a DSPT Siglab analyser. A large number of features indicative of tool wear were automatically extracted from different parts of the original signals. These included features from the time and frequency domains, time-series model coefficients (as features) and features extracted from wavelet packet analysis. A correlation coefficient approach was used to automatically select the best features indicative of the progressive wear of the diamond tools. The self-organising map (SOM) was employed to identify the tool state. The SOM is a type of neural network based on unsupervised learning. A near 100% correct classification of the tool wear data was obtained by training the SOM with two independent data sets, and testing it with a third independent data set.

Vibration-based tool wear monitoring using artificial neural networks fed by spectral centroid indicator and RMS of CEEMDAN modes

The analysis of tool vibration signals by spectral kurtosis and ICEEMDAN modes energy for insert wear monitoring in turning operation

Condition Monitoring of Cutting Tools by Feature Analysis of Vibro-Acoustic Sensing Signals

Real-Time Estimation for Cutting Tool Wear Based on Modal Analysis of Monitored Signals

Tool wear monitoring based on the combination of machine vision and acoustic emission

Tool wear condition monitoring based on wavelet transform and improved extreme learning machine

Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process

Computer numerical control machine tool wear monitoring through a data-driven approach

Tool Wear Monitoring in CNC Milling Process Based on Vibration Signals from an On-Rotor Sensing Method

A hybrid CNN-BiLSTM approach-based variational mode decomposition for tool wear monitoring

Development of an ANN model for prediction of tool wear in turning EN9 and EN24 steel alloy

An effective sensor for tool wear monitoring in face milling: Acoustic emission

Real-time estimation of machine cutting tool wear

Machine learning coupled with acoustic emission signal features for tool wear estimation during ultrasonic machining of Inconel 718

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

The Tool Wear and Breakage Monitoring in Turning Using Neural Network

Surface roughness and tool wear monitoring in turning processes through vibration analysis using PSD and GRMS

Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision

Tool Wear Monitoring with Vibration Signals Based on Short-Time Fourier Transform and Deep Convolutional Neural Network in Milling

Experimental study of tool life transition and wear monitoring in turning operation using a hybrid method based on wavelet multi-resolution analysis and empirical mode decomposition

An industrial tool wear monitoring system for interrupted turning