Abstract:In this study, the authors utilize the wavelet transform technique within the intelligent turning process. This technique is applied to the machining of hardened steel SKD 61. The main focus is on monitoring the condition of the cutting tool, and this is done during the machining process, regardless of the conditions related to chip formation. Wavelet transforms serve the purpose of distinguishing indications of tool wear from received signals. These signals emerge from the analysis of components such as cutting force and acoustic emission (AE) signals. The authors investigate this analysis alongside the relationships between various cutting parameters, including depth of cut, feed rate, and cutting speed. The fifth-order wavelet transform is used to determine the ratio between the primary cutting force and the components obtained from the AE signal decomposition. This ratio is evaluated using mean–variance calculations. The intention is to mitigate the influence of different factors that relate to cutting conditions. Building upon the factors associated with cutting parameters (feed rate, depth of cut, and cutting speed), a model for predicting tool wear is established. This model takes into account the decomposition analysis ratio of the main cutting force and the AE signal component. This ratio is developed based on exponential analysis. The reliability of the proposed model for monitoring cutting tool wear is validated through a series of experiments. The results of these experiments indicate that changes in cutting parameters significantly impact the amount of tool wear. Specifically, increasing the depth of cut, feed rate, and cutting speed leads to higher cutting forces and subsequently increased tool wear. The experimental analysis for turning hardened steel SKD 61 reveals that the tool wear monitoring system introduced through wavelet analysis demonstrates impressive predictive capabilities. This system not only accurately predicts tool wear but also effectively separates noise signals from chip formation signals, even when faced with varying cutting conditions.

The analysis of tool vibration signals by spectral kurtosis and ICEEMDAN modes energy for insert wear monitoring in turning operation

Vibration-based tool wear monitoring using artificial neural networks fed by spectral centroid indicator and RMS of CEEMDAN modes

Surface roughness and tool wear monitoring in turning processes through vibration analysis using PSD and GRMS

Experimental study of tool life transition and wear monitoring in turning operation using a hybrid method based on wavelet multi-resolution analysis and empirical mode decomposition

Tool-wear monitoring in machine turning

Tool wear condition monitoring based on wavelet transform and improved extreme learning machine

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Real-Time Estimation for Cutting Tool Wear Based on Modal Analysis of Monitored Signals

A brief review: acoustic emission method for tool wear monitoring during turning

Tool wear mechanism of turning Inconel 718 and EEMD-based feature analysis

An effective sensor for tool wear monitoring in face milling: Acoustic emission

Application of wavelet ratio between acoustic emission and cutting force signal decomposing in intelligent monitoring of cutting tool wear when turning SKD 61

Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool

An industrial tool wear monitoring system for interrupted turning

Development of an ANN model for prediction of tool wear in turning EN9 and EN24 steel alloy

Time-frequency analysis-based impulse feature extraction method for quantitative evaluation of milling tool wear

Tool wear estimation in turning of Inconel 718 based on wavelet sensor signal analysis and machine learning paradigms

Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool

Evaluation of Clustering Techniques to Predict Surface Roughness during Turning of Stainless-Steel Using Vibration Signals

In-situ tool wear condition monitoring during the end milling process based on dynamic mode and abnormal evaluation

An experimental approach to characterize the performance of PCD and PCBN tools in milling nano Al-8081-Zr/Mg/TiO2 metal matrix composites using multi-sensor data fusion