Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Time-frequency analysis-based impulse feature extraction method for quantitative evaluation of milling tool wear

Feature Extraction Of Impulse Faults For Vibration Signals Based On Sparse Non-Negative Tensor Factorization

On Fault Feature Extraction of a Gear by Complex Morlet Wavelet Transform and Coefficient Correlation

Tool condition monitoring in micro milling of brittle materials

Feature Extraction and Analysis Method of Spindle Vibration Signal for Tool Wear Monitoring

Tool Wear Monitoring with Vibration Signals Based on Short-Time Fourier Transform and Deep Convolutional Neural Network in Milling

An Approach to Health Assessment for Tools in Milling Machine

Milling force coefficients-based tool wear monitoring for variable parameter milling

Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method

Application of Bispectrum Diagonal Slice Feature Analysis in Tool Wear States Monitoring

In-situ tool wear condition monitoring during the end milling process based on dynamic mode and abnormal evaluation

Milling Tool Wear Monitoring via the Multichannel Cutting Force Coefficients

An Improved Tool Wear Monitoring Method Using Local Image and Fractal Dimension of Workpiece

Research on Power and Vibration Signal Acquisition Method and System of Machine Tool for Tool Wear Monitoring

Application of bispectrum diagonal slice feature analysis to monitoring CNC tool wear states

Physical model-based tool wear and breakage monitoring in milling process

An Approach for Tool Health Assessment Using the Mahalanobis-Taguchi System Based on Wpt-Ar

Real-Time Estimation for Cutting Tool Wear Based on Modal Analysis of Monitored Signals

Study of Tool Wear Monitoring Using Machine Vision

Cutting Tool Wear Monitoring in CNC Machines Based in Spindle-Motor Stray Flux Signals

Cutting tool wear monitoring based on a smart toolholder with embedded force and vibration sensors and an improved residual network