Abstract:There is an increasing trend in the industry of knowing in real-time the condition of their assets. In particular, tool wear is a critical aspect, which requires real-time monitoring to reduce costs and scrap in machining processes. Traditionally, for the purpose of predicting tool wear conditions in machining, mathematical models have been developed to extract the information from the signal of sensors attached to the machines. To reduce the complexity of developing physical models, where an in-depth knowledge of the system being modelled is required, the current trend is to use machine-learning (ML) models based on data from the tool wear. The acoustic emission (AE) technique has been widely used to capture data from and understand the real-time condition of industrial assets such as cutting tools. However, AE signal interpretation and processing is rather complex. One of the most common features extracted from AE signals to predict the tool wear is the counts parameter, defined as the number of times that the amplitude of the signal exceeds a predefined threshold. A recurrent problem of this feature is to define the adequate threshold to obtain consistent wear prediction. Additionally, AE signal bandwidth is rather wide, and the selection of the optimum frequencies band for feature extraction has been pointed out as critical and complex by many authors. To overcome these problems, this paper proposes a methodology that applies multi-threshold count feature extraction at multiresolution level using wavelet packet transform, which extracts a redundant and non-optimal feature map from the AE signal. Next, recursive feature elimination is performed to reduce and optimize the vast number of predicting features generated in the previous step, and random forests regression provides the estimated tool wear. The methodology presented was tested using data captured when turning 19NiMoCr6 steel under pre-established cutting conditions. The results obtained were compared with several ML algorithms such as k-nearest neighbors, support vector machines, artificial neural networks and decision trees. Experimental results show that the proposed method can reduce the predicted root mean squared error by 36.53%.

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

Cutting tool wear monitoring through cutting sound classification and machine learning

Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Tool Wear Condition Monitoring Using Emitted Sound Signals By Simple Machine Learning Technique

Tool wear monitoring based on the combination of machine vision and acoustic emission

Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process

TCM in milling processes based on attention mechanism-combined long short-term memory using a sound sensor under different working conditions

An approach based on current and sound signals for in-process tool wear monitoring

Real-time estimation of machine cutting tool wear

Tool wear condition monitoring by combining spindle motor current signal analysis and machined surface image processing

An effective sensor for tool wear monitoring in face milling: Acoustic emission

Computer numerical control machine tool wear monitoring through a data-driven approach

Monitoring Built-Up Edge, Chipping, Thermal Cracking, and Plastic Deformation of Milling Cutter Inserts through Spindle Vibration Signals

Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method

Machine learning coupled with acoustic emission signal features for tool wear estimation during ultrasonic machining of Inconel 718

Identification of tool wear using acoustic emission signal and machine learning methods

Evaluation of transducer signature selections on machine learning performance in cutting tool wear prognosis

Application of Machine Learning Algorithms for Tool Condition Monitoring in Milling Chipboard Process

Real-time tool condition monitoring with the internet of things and machine learning algorithms

Tool Wear Condition Monitoring by Combining Variational Mode Decomposition and Ensemble Learning

A Novel Machine Learning-Based Methodology for Tool Wear Prediction Using Acoustic Emission Signals