Abstract:There is an increasing trend in the industry of knowing in real-time the condition of their assets. In particular, tool wear is a critical aspect, which requires real-time monitoring to reduce costs and scrap in machining processes. Traditionally, for the purpose of predicting tool wear conditions in machining, mathematical models have been developed to extract the information from the signal of sensors attached to the machines. To reduce the complexity of developing physical models, where an in-depth knowledge of the system being modelled is required, the current trend is to use machine-learning (ML) models based on data from the tool wear. The acoustic emission (AE) technique has been widely used to capture data from and understand the real-time condition of industrial assets such as cutting tools. However, AE signal interpretation and processing is rather complex. One of the most common features extracted from AE signals to predict the tool wear is the counts parameter, defined as the number of times that the amplitude of the signal exceeds a predefined threshold. A recurrent problem of this feature is to define the adequate threshold to obtain consistent wear prediction. Additionally, AE signal bandwidth is rather wide, and the selection of the optimum frequencies band for feature extraction has been pointed out as critical and complex by many authors. To overcome these problems, this paper proposes a methodology that applies multi-threshold count feature extraction at multiresolution level using wavelet packet transform, which extracts a redundant and non-optimal feature map from the AE signal. Next, recursive feature elimination is performed to reduce and optimize the vast number of predicting features generated in the previous step, and random forests regression provides the estimated tool wear. The methodology presented was tested using data captured when turning 19NiMoCr6 steel under pre-established cutting conditions. The results obtained were compared with several ML algorithms such as k-nearest neighbors, support vector machines, artificial neural networks and decision trees. Experimental results show that the proposed method can reduce the predicted root mean squared error by 36.53%.

Identification of tool wear using acoustic emission signal and machine learning methods

Experimental Investigation of Correlation Between Attrition Wear and Features of Acoustic Emission Signals in Single-Grit Grinding

Machine learning coupled with acoustic emission signal features for tool wear estimation during ultrasonic machining of Inconel 718

An effective sensor for tool wear monitoring in face milling: Acoustic emission

A Novel Machine Learning-Based Methodology for Tool Wear Prediction Using Acoustic Emission Signals

Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Optimizing tool life in SiCp/Al composites milling with acoustic emission analysis: A comprehensive monitoring and implementation strategy

A brief review: acoustic emission method for tool wear monitoring during turning

Tool condition monitoring in micro milling of brittle materials

Tool wear monitoring based on the combination of machine vision and acoustic emission

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method

Tool wear evaluation under minimum quantity lubrication by clustering energy of acoustic emission burst signals

Acoustic emission identification of wheel wear states in engineering ceramic grinding based on parameter-adaptive VMD

Application of Machine Learning Algorithms for Tool Condition Monitoring in Milling Chipboard Process

Tool wear condition monitoring based on wavelet transform and improved extreme learning machine

Tool Wear Condition Monitoring Using Emitted Sound Signals By Simple Machine Learning Technique

Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

Decision Support by Interpretable Machine Learning in Acoustic Emission Based Cutting Tool Wear Prediction

An acoustic imaging recognition based cutting tools wear state prediction method