Abstract:We designed nine distinct compositions of AlCrNbSiTi high-entropy alloy targets by adjusting the Al, Cr, Nb, and Ti contents, while maintaining the Si content at 7.7 at.%. We fabricated (AlCrNbSiTi)N films using the high-power impulse magnetron sputtering (HiPIMS) technique. By analyzing the microstructure and properties of the films, we have identified an expanded compositional window. This expansion enables (AlCrNbSiTi)N films with varying composition ratios to consistently demonstrate excellent mechanical properties. This consistency proves advantageous in terms of both sputtering target preparation and coating applications. In this study, all films had a single face-centered cubic (NaCl-type) structure with a crystallite size of ∼6 nm and lattice constant of ∼4.22 Å. The hardness of the films varied between 25.9 and 27.6 GPa. The thickness of the oxide layer formed when the films were annealed at 800 °C for 2 h under atmospheric conditions was approximately 30 nm, regardless of the composition. We also examined the cutting properties of (AlCrNbSiTi)N coatings on carbide cutting tools. Under dry milling conditions and extended cutting distances, the (AlCrNbSiTi)N coatings exhibited a remarkable reduction in flank wear length, with reductions of 78%, 64%, and 68% when compared to the commercial coatings TiN, TiAlN, and AlTiN, respectively. Furthermore, these coatings remained intact without peeling during milling on a 304 stainless steel workpiece. This research demonstrates that the combination of HiPIMS and high-entropy (AlCrNbSiTi)N could provide hard coatings with excellent performance during cutting. The characteristics of the coatings are attributable to the fineness and high density of the films deposited by HiPIMS and the synergistic lattice distortion and cocktail effects, which are similar in the compositional window of the designed alloy system.

Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS

Effects of Substrate Rotation Speed on Structure and Adhesion Properties of CrN/CrAlSiN Multilayer Coatings Prepared Using High-Power Impulse Magnetron Sputtering

Structural, surface electronic bonding, optical, and mechanical features of sputtering deposited CrNiN coatings with Si and Al additives

Mechanical and Tribological Properties of the CrAl/CrAlN and CrAl/CrAlN-(a-CNx) Multilayers Deposited by HIPIMS

Effects of Carbon Doping and DC Bias Voltage on Microstructure and Mechanical Properties of AlCrCN Films Synthesized via HiPIMS

Microstructure, Mechanical and Adhesive Properties of CrN/CrTiAlSiN/WCrTiAlN Multilayer Coatings Deposited on Nitrided AISI 4140 Steel

Microstructure evolution and mechanical performance of Cr-N/Al-Cr multilayer coatings produced by plasma nitriding Cr-coated Al alloy

Structure, mechanical and tribological properties of thick CrNx coatings deposited by HiPIMS

Nitrogen-Enriched Cr1-xAlxN Multilayer-Like Coatings Manufactured by Dynamic Glancing Angle Direct Current Magnetron Sputtering

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Design of cycle structure on microstructure, mechanical properties and tribology behavior of AlCrN/AlCrSiN coatings

Study on the Properties of Cr/CrxN Films Prepared by Magnetron Sputtering and Ion Implantation Alternately

Structure and mechanical properties of CrN thick films deposited by high-rate medium-frequency magnetron sputtering

Structure and Wear Behavior of AlCrSiN-based Coatings

Micrograph and Structure of CrN Films Prepared by Plasma Immersion Ion Implantation and Deposition Using HPPMS Plasma Source

Fabrication and cutting performance of CrAlN/CrAl multilayer coatings deposited by continuous high-power magnetron sputtering

Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating

Effect of Si doping on structure and properties of CrAlN nanometer hard coatings

Mechanical performance of high-entropy (AlCrNbSiTi)N films fabricated by high-power impulse magnetron sputtering over a wide compositional window

Microstructure and mechanical properties of CrN films fabricated by high power pulsed magnetron discharge plasma immersion ion implantation and deposition

Mechanical Properties and Thermal Stability of CrZrN/CrZrSiN Multilayer Coatings with Different Bilayer Periods