Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. For the past few decades, Copper alloys have made significant contributions to a variety of industrial applications due to their efficient electrical and thermal conductivity. However, moving mechanical assemblies continues to raise concerns about wear-related mechanical breakdowns on a worldwide scale. Hence, this research focuses on examining the wear parameters such as load, sliding velocity and distance based on the re-melting strategy of the (Laser Powder Bed Fusion) LPBF process. The sliding tests were carried out over a wide range load (15, 25, 35 and 45 N), sliding velocity (1, 1.5, 2 and 2.5 m/s) and sliding distance (1500, 2500, 3500 and 4500 m) with a pin-on-disc configuration. The LPBFed Cu–Cr–Zr alloy coupon was printed with four different re-melting ranges (5, 15, 30 and 45%) and it was explored to minimise the occurrence of un-melted particles and inter-particle gaps. The wear results show that the wear parameters have a positive correlation with the Wear Rate (WR) and co-efficient of friction (COF) and also witnessed that the WR and COF decrease with increasing the re-melting rate. The nano-hardness analysis was compared on the un-melted and spattered particles and the re-melted surface. The results show that the spattered particles possess 35.8% more nano-hardness than the other surface on the Cu alloy coupon printed with a 45% re-melting range. The FE-SEM images of the worn-out surface reveal that un-melted and spattered particles have a major contribution in reducing the wear resistance of the printed Cu alloy coupons.

Nanowear characterization of LPBF fabricated CuCrZr alloy

Analysis of tribological behavior of Laser Powder Bed Fusion (LPBF) CuCrZr alloy through reciprocating loading on the columnar structure

Influence of re-melting rate on the dry sliding wear characteristics of LPBFed Cu–Cr–Zr alloy

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Friction and dry sliding wear of Al–Fe–Cr quasicrystals with multi-reinforcements by laser powder bed fusion

Enhancing the wear resistance by mitigation of defect formations in laser powder bed fusion process of Cu–Cr–Zr alloy

A synergistic impact of LPBF process parameters on attaining a defect-free Cu-Cr-Zr alloy parts: an analytical and experimental study

Laser powder bed fusion of in-situ amorphous oxide dispersion strengthened immiscible Cu-316 L bimetallic composite: Formation mechanism and current-carrying wear behavior

Achieving low wear in a complex concentrated alloy CrFeNiNb with multi-phase hierarchical microstructure

Remarkable Wear Resistance in a Complex Concentrated Alloy with Nanohierarchical Architecture and Composition Undulation

Achieving Ultralow Wear with Stable Nanocrystalline Metals

Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation

Excellent wear resistance of multicomponent nanocrystalline W‒Cu based composite

Revealing the High Strength and High Thermal Stability of a Nano-Lamellar Cu-0.1 At. % Zr Alloy

Uncovering wear mechanism of a Fe2Ni2CrAl multi-principal elements alloy

Surface condition driven fatigue performance of laser powder bed fusion H13 steel

Friction and wear characteristics of the nanolaminated ternary transition metal boride: Mn2AlB2

Sliding Wear Behavior of Fully Nanotwinned Cu Alloys

Mechanical and tribological property of Cu/CrB 2 composites under dry sliding condition

Self-lubricating behavior of a PdCuNiP glassy alloy by in-situ nanocrystallization during dry friction

Mechanical and tribological properties of Zr–Cu–Ni–Al bulk metallic glasses with dual-phase structure