Abstract:A key component of automotive and aerospace applications is Scalmalloy components, which are produced using the laser powder bed fusion (LPBF) process. However, alternative cooling conditions were used during the heat treatment process to enhance the performance of the Scalmalloy parts. This research investigated the nano-level, tribo-mechanical and microstructural properties of the heat-treated Scalmalloy parts. In this study, Scalmalloy was heat treated at 325o C for 4 h and then cooling was performed under different conditions such as cooling in the furnace, air and water (FC, AC and WC, respectively). The development of Al3(Sc, Zr) nano-precipitates in the , , and lattice planes was verified by XRD. OM and FESEM analysis confirmed that the heat-treated Scalmalloy under the WC condition possessed enhanced grain refinement compared to the other conditions. Moreover, EBSD analysis also substantiated the phenomenon observed during the microstructural analysis. It was also confirmed that heat-treated Scalmalloy with the WC condition had a reduced grain size of 5.5 μm which was 74% and 66% lower than the FC and AC conditions, respectively. This grain refinement was attributed to the improved nano-hardness of 3.2 GPa with a minimum indentation depth of 19.45 nm, which was 69% and 41% lower than the FC and AC conditions, respectively. Similarly, nano-wear analysis also confirmed that the WC condition showed a maximum COF of 0.81 and 49% enhanced wear resistance with a minimum worn-out depth and pile-up of − 78.16 nm and 48.41 nm, respectively. Further, various wear mechanisms such as abrasion, oxidation and delamination were also examined based on the worn-out surface of the wear specimens. Tensile performance revealed that the WC condition possessed a more brittle fracture with a maximum tensile strength of 535 MPa, whereas the FC condition displayed a more ductile fracture with a maximum elongation of 10%. These differences in their fracture mechanics justified the grain refinement of the heat-treated specimens with different cooling conditions.

Enhancing the wear resistance by mitigation of defect formations in laser powder bed fusion process of Cu–Cr–Zr alloy

A synergistic impact of LPBF process parameters on attaining a defect-free Cu-Cr-Zr alloy parts: an analytical and experimental study

Influence of re-melting rate on the dry sliding wear characteristics of LPBFed Cu–Cr–Zr alloy

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Nanowear characterization of LPBF fabricated CuCrZr alloy

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

Analysis of tribological behavior of Laser Powder Bed Fusion (LPBF) CuCrZr alloy through reciprocating loading on the columnar structure

Superior wear resistance in cast aluminum alloy via femtosecond laser induced periodic surface structures and surface hardening layer

A data-driven framework to improve the wear resistance of a low-alloy steel fabricated by laser powder bed fusion

Combining Ultrafast Laser Texturing and Laser Hardening to Enhance Surface Durability by Improving Hardness and Wear Performance

Preparation of Cu-Cr-Zr Alloy by Laser Powder Bed Fusion: Parameter Optimization, Microstructure, Mechanical and Thermal Properties for Microelectronic Applications

Surface condition driven fatigue performance of laser powder bed fusion H13 steel

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect free melt pool formations

Crack inhibition to enhance the tensile and impact strength of additively manufactured CuCrZr alloy

Laser powder bed fusion of in-situ amorphous oxide dispersion strengthened immiscible Cu-316 L bimetallic composite: Formation mechanism and current-carrying wear behavior

Reducing cracking sensitivity of CM247LC processed via laser powder bed fusion through composition modification

Influence of coherent intermetallic nano-precipitates on the nano-level mechanical and tribological properties of the Laser-Powder bed fused Scalmalloy

Investigation on tribo-mechanical characterization of heat-treated LPBF-based Scalmalloy parts under certified conditions

Muti-mechanism of the improving wear performance for titanium alloy via laser powder bed fusion

Microstructure, mechanical properties, and tribological properties of laser assisted cold sprayed CuCrZr coatings: Influences of laser power and laser position