Abstract:CoCrNi medium-entropy alloy (MEA) exhibits exceptional damage-tolerance, particularly at cryogenic temperatures, but demonstrates poor wear resistance. In this study, we propose a strategy to significantly reduce friction and wear of CoCrNi MEA film through the introduction of massive interstitial carbon-induced amorphization. The microstructure of as-sputtered CoCrNi film reveals an anisotropic columnar nanograin structure, featuring a primary face-centered-cubic (fcc) phase and a minor hexagonal-close-packed (hcp) phase. Upon the introduction of 16 at. % interstitial carbon (CoCrNi-C), a remarkable phase transformation occurs, resulting in an isotropic amorphous structure. Under low-load and low-sliding-velocity conditions, the CoCrNi-C film exhibits a 21% reduction in coefficient of friction (CoF) and 17% reduction in wear rate. More notably, when subjected to higher loads and sliding velocities, the CoCrNi film experiences rapid failure within the initial 100 cycles, manifesting as microcracks, breakage, and peeling. In contrast, the amorphous CoCrNi-C film demonstrates remarkable durability, sustaining over 5000 cycles without failure. The wear rate exhibits a negative correlation with load but a positive correlation with sliding velocity. This enhanced wear resistance can be attributed to the amorphous nature of the CoCrNi-C film, which inhibits local strain accumulation, preventing strain localization that typically leads to crack initiation and propagation in the CoCrNi film. Additionally, the formation of a protective oxide layer contributes to the improved wear resistance of CoCrNi-C film under higher loads and lower sliding velocities. This study provides valuable insights into the design of wear-resistant CoCrNi-based MEA coatings through massive interstitial carbon-induced amorphization.

Achieving low wear in a complex concentrated alloy CrFeNiNb with multi-phase hierarchical microstructure

Sliding Wear Behavior of a Laves Phase-Strengthened CrFeNiNb0.158 Alloy at Room and Elevated Temperatures

Remarkable Wear Resistance in a Complex Concentrated Alloy with Nanohierarchical Architecture and Composition Undulation

Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution

Wear-resistant CrCoNi nanocrystalline film via friction-driven surface segregation

Uncovering wear mechanism of a Fe2Ni2CrAl multi-principal elements alloy

Significant Reduction in Friction and Wear of an Ultrafine-Grained Single-Phase FeCoNi Alloy Through the Formation of Nanolaminated Structure

Effect of W on the Mechanical Properties and Tribological Behavior of CoCrFeNiWx Compositionally Complex Alloy

Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear

Achieving Exceptional Wear Resistance in a Compositionally Complex Alloy Via Tuning the Interfacial Structure and Chemistry

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions

Microstructure and Dry Sliding Wear Behavior of Ultrafine-Grained Co-30 At% Cr Alloy at Room and Elevated Temperatures

Realizing excellent tribological properties of BCC/FCC gradient high -entropy alloy coating via an in-situ interface reaction

Significantly Lowering Friction and Wear of CoCrNi Medium-Entropy Alloy Film Via Massive Interstitial Carbon-Induced Amorphization

Insights into the microstructural evolution and wear behavior of underwater friction stir processed CoCrFeNiMn high-entropy alloy

Effect of microstructure evolution on wear resistance of equal molar CoCrFeNi high-entropy alloy

Sliding Wear of Nanocrystalline Nb-Ag at Elevated Temperatures: Evolution of Subsurface Microstructure and Its Correlation with Wear Performance

Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy

Microstructure, Mechanical Properties, and Sliding Wear Behavior of Oxide-Dispersion-Strengthened FeMnNi Alloy Fabricated by Spark Plasma Sintering

Enhancing wear resistance: In-situ ceramic phase precipitation for strengthening and toughening FeCoNiCrNx high-entropy alloy films

Superior Wear Resistance in a TaMoNb Compositionally Complex Alloy Film Via In-Situ Formation of the Amorphous-Crystalline Nanocomposite Layer and Gradient Nanostructure