Abstract:The lack of a principle element in high-entropy alloys (HEA) leads to unique and unexpected material properties. Tribological loading of metallic materials often results in deformed subsurface layers. As the microstructure feedbacks with friction forces, the microstructural evolution is highly dynamic and complex. The concept of HEAs promises high solid solution strengthening, which might decrease these microstructural changes. Here, we experimentally investigated the deformation behavior of CoCrFeMnNi in a dry, reciprocating tribological contact under a mild normal load. After only a single stroke, a surprisingly thick subsurface deformation layer was observed. This layer is characterized by nanocrystalline grains, twins and bands of localized dislocation motion. Twinning was found to be decisive for the overall thickness of this layer, and twin formation within the stress field of the moving sphere is analyzed. The localization of dislocation activity, caused by planar slip, results in a grain rotation. Fragmentation of twins and dislocation rearrangement lead to a nanocrystalline layer underneath the worn surface. In addition, oxide-rich layers were found after several sliding cycles. These oxides intermix with the nanocrystalline layer due to material transfer to the counter body and re-deposition to the wear track. Having revealed these fundamental mechanisms, the evolution of such deformation layers in CoCrFeMnNi under a tribological load might lead to other HEAs with compositions and properties specifically tailored to tribological applications in the future.

Effect of microstructure evolution on wear resistance of equal molar CoCrFeNi high-entropy alloy

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy

Effect of titanium content on wear resistance of CoCuFeNiVTix high-entropy alloys

A Wear-Resistant Metastable CoCrNiCu High-Entropy Alloy with Modulated Surface and Subsurface Structures

Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution

Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear

Dynamic impact behavior and deformation mechanisms of Cr(26)Mn(20)Fe20Co(20)Ni(14) high-entropy alloy

Investigation into Reciprocating Dry Sliding Friction and Wear Properties of Bulk CoCrFeNiMo High Entropy Alloys Fabricated by Spark Plasma Sintering and Subsequent Cold Rolling Processes: Role of Mo Element Concentration

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions

Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy

Microstructure and Wear Behavior of AlxCo1.5CrFeNi1.5Tiy High-Entropy Alloys

Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys

Effect of Al content on microstructure and wear properties of FeCrNiMnAlx high-entropy alloys

Microstructural changes in CoCrFeMnNi under mild tribological load

Microstructures and Wear Behaviour of (Fecocrni)1-X(wc)x High Entropy Alloy Composites

Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high-entropy alloys

An atomic insight into the stoichiometry effect on the tribological behaviors of CrCoNi medium-entropy alloy

Effect of Aluminum Content on Microstructure and Wear Resistance of CuCrFeMnTiAl_x High-Entropy Alloy

Robust wear performance of graphene-reinforced high entropy alloy composites

Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCu x high entropy alloys