Abstract:Ti–Mo–Zr alloys have attracted increasing interest for biomedical applications, due to their outstanding properties such as low elastic modulus. To improve the bioactivity of alloys, this study utilized the anodic oxidation method to fabricate porous micro/nano structures on the surface of a series of Ti–Mo–Zr alloys, including the Ti–12Mo-AO, Ti–10Zr-AO, and Ti–12Mo–10Zr-AO groups. The morphology, composition, phase, microhardness, roughness, wettability, adhesion strength, corrosion resistance, bioactivity, and biocompatibility of each group were systematically investigated. The formation mechanism of surfaces was discussed from the perspective of thermodynamics. Our results demonstrated that, Ti–12Mo-AO showed the structure of single-layer regularly arranged nanotubes, while Ti–10Zr-AO and Ti–12Mo–10Zr-AO exhibited a double-layer porous structure with a nano-filamentous upper layer and a densely arranged nanotube lower layer. With low crystallinity, these surfaces showed an amorphous structure and were composed of the oxides of corresponding matrix element. After anodizing, the microhardness and wettability of surfaces increased, while their corrosion resistance decreased. Compared with Ti–12Mo-AO, Ti–10Zr-AO and Ti–12Mo–10Zr-AO possessed a higher degree of roughness, better wettability, stronger interface bonding, and higher apatite forming ability. Furthermore, the biocompatibility of Ti–12Mo–10Zr-AO was superior to that of the other groups. Taken together, our results revealed that, under the same anodic oxidation condition, Ti–Mo–Zr alloys formed different porous micro/nano structures on the surface. Particularly, due to its favorable properties, Ti–12Mo–10Zr-AO is very attractive for future biomedical application.

Improved wear and corrosion resistance of biomedical TiZrNbTaMo medium-entropy alloy by thermal oxidation treatment

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Oxide ceramic coatings with amorphous/nano-crystalline dual-structures prepared by micro-arc oxidation on Ti–Nb–Zr medium entropy alloy surfaces for biomedical applications

Achieving superior mechanical properties and biocompatibility in an O-doping TiZrNb medium entropy alloy

Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Enhanced mechanical properties and oxidation resistance in Ti-rich medium entropy alloy via Al 2 O 3 addition

Influence of Thermal Oxidation Temperature on the Microstructural and Tribological Behavior of Ti6Al4V Alloy

Research progress on thermal oxidation process and wear, corrosion resistance and bioactivity of biomedical grade titanium alloy

Enhanced wear, corrosion, and corrosive-wear resistance of the biocompatible Ti-based bulk metallic glass by oxidation treatment

Improvement on biocompatibility and corrosion resistance of a Ti3Zr2Sn3Mo25Nb alloy through surface nanocrystallization and micro-arc oxidation

Dual-structured oxide coatings with enhanced wear and corrosion resistance prepared by plasma electrolytic oxidation on Ti-Nb-Ta-Zr-Hf high-entropy alloy

Surface Characterization of New β Ti-25Ta-Zr-Nb Alloys Modified by Micro-Arc Oxidation

Investigations on microstructure and properties of Ti-Nb-Zr medium-entropy alloys for metallic biomaterials

Construction of porous micro/nano structures on the surface of Ti–Mo–Zr alloys by anodic oxidation for biomedical application

Microstructure and surface performance of hydroxyapatite-modified multilayer amorphous coating on Ti-rich TiNbZrSn medium entropy alloy: A comparative study

Simultaneously enhanced oxidation resistance and mechanical properties in a novel lightweight Ti2VZrNb0.5Al0.5 high-entropy alloy

Incorporation of Ca, P, Mg, and Zn Elements in Ti-30Nb-5Mo Alloy by Micro-Arc Oxidation for Biomedical Implant Applications: Surface Characterization, Cellular Growth, and Microorganisms’ Activity

The Improvement of Wettability, Biotribological Behavior and Corrosion Resistance of Titanium Alloy Pretreated by Thermal Oxidation

Improvement of tribological performance by micro-arc oxidation treatment on selective laser melting Ti6Al4V alloy