Abstract:Porous Si2N2O/SiC ceramics is facilitated at 1200 °C for 10 min by microwave sintering. Rapid in‐situ production of Si2N2O fibers provided high mechanical properties of the samples. The porosity of the prepared sample is tailorable and the thermal insulation effect is excellent. Two steps strategy were taken to effectively produce porous Si2N2O/SiC ceramics: 1) direct foaming combined with sol‐gel curing at room temperature to form a green body, and 2) sintering assisted by in‐situ production of Si2N2O fibers under microwave sintering conditions. Non‐toxic silica sol was used to provide silicon source for in‐situ synthesis of Si2N2O, the silica sol could form a gel that stabilizes the bubbles, creating a porous structure. A thorough investigation was conducted into how different sintering temperatures affected the microstructure, flexural strength, and porosity of the porous Si2N2O/SiC composites. The main bonding phase in the porous composites was the Si2N2O with fiber morphology. The optimal microwave sintering temperature for fabricating porous Si2N2O/SiC ceramics, using a combination of sol‐gel and direct foaming techniques, has been determined to be 1200 °C. At this temperature, the porosity can be controlled between 73.32% and 83.16% by proportionally adjusting the ratio of the raw materials. Under the condition of high porosity, the thermal radiation is dominant and the thermal conductivity increases with the increase of temperature. With the decrease of porosity, the heat conduction is dominant, and the thermal conductivity decreases with the increase of temperature.

Preparation and properties of SiC/SiOX heterojunction fiber reinforced porous SiC composite materials

Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure

Thermal Conductivity and Microstructure Properties of Porous SiC Ceramic Derived from Silicon Carbide Powder

Fabrication and Characterization of Hierarchical Porous SiC Ceramics Via Gelcasting and Carbothermal Reduction Between Carbon and SiO

Preparation and Properties of Porous Silicon Carbide Ceramics Through Coat-Mix and Composite Additives Process

Gel casting and properties of porous silicon carbide/silicon nitride composite ceramics

Preparation and Basic Properties of a New Porous SiC

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Preparation of Porous Si2N2O/SiC Ceramics by Microwave Sintering

Mechanical and Dielectric Properties of Porous Si3n4-Sio2 Composite Ceramics

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Preparation and Properties of Porous SiC/SiC Composites

Synthesis and properties of porous SiN/SiC nanocomposites by carbothermal reaction between SiN and carbon

Preparation and characterization of lightweight SiC frameworks by connecting SiC fibers with SiC joints

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Preparation and Properties of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Fabrication and Properties of SiC/mullite Composite Porous Ceramics

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Preparation and Pore Structure Characteristics of SiC Honeycomb Ceramics with Macroporous Walls

PREPARATION OF MACROPOROUS SiC FROM WOODCERAMICS AND SILICON POWDER BY IN SITU REACTION-SINTERING PROCESS