[Permanent pacemaker placement in a persistent left superior vena cavae anomaly: transvenous or epicardial approach].

M. I. Badak,A. Onbasili,E. Ozkisacik,M. Boğa,Uğur Gürcün,Kutsi Köseoğlu

2005-12-01

Abstract:

What problem does this paper attempt to address?

Comparative Evaluation of Dentinal Defects After Root Canal Preparation Using Various Nickel Titanium Files: An In Vitro Study

Renu Batra,Ankita Dixit,Anushree Tiwari,Amit Kumar,Shagun Sinha,Sheetal Badnaware,Ramanpal Singh

DOI: https://doi.org/10.7759/cureus.38829

2023-05-10

Cureus

Abstract:Aim: This study set out to compare the damage done to dentin by three distinct titanium file brands - the Hyflex EDM, the ProTaper Next, and the Waveone Gold Nickel - in order to draw conclusions about which one is the most effective. Materials and methods: Forty-first premolars in the mandible with straight canals and single roots were instrumented using Hyflex EDM, Waveone Gold, and Protaper Next. Dentinal flaws after endodontic treatment were studied by sectioning specimens using a hard tissue microtome and analyzing them under a stereomicroscope. Results: There was no discernible variation between the groups in the coronal third (p=0.312) or apical third (p=0.076). Hyflex EDM and Protaper Next differed significantly in the middle portion of the tape (p=0.016). The Hyflex EDM sample had the fewest cracks. There was no statistically significant difference between Hyflex EDM and Waveone Gold; however, Hyflex EDM had fewer fractures in the middle third of the sample than Waveone Gold did. Conclusion:Electric discharge machining (EDM) files made from Hyflex proved to be far superior to their Protaper Next and Waveone Gold counterparts as they induced the fewest cracks in the middle third of the root dentin.
Microscopic Evaluation of Dentinal Defects after Root Canal Preparation with Different Hand and Nickel-Titanium Files; An In Vitro Study

Hiral Milap Karia,Ishita Vaghela,Archan Dhanesha,Mrugnayani,Pranav Solanki,Rangesing Rathwa

DOI: https://doi.org/10.4103/jpbs.jpbs_960_23

2024-02-01

Journal of Pharmacy And Bioallied Sciences

Abstract:A BSTRACT Background: Effective endodontic instrumentation aims to remove microorganisms, debris, and tissue from the root canal while maintaining dentinal integrity. This study compares dentinal defect incidence following canal preparation with different hand files, nickel-titanium rotary files, and reciprocating files Materials and Methods: Eighty single-rooted mandibular premolars with mature apices were collected. Four groups ( n = 20) were established based on canal patency establishment, canal preparation technique, irrigation solution, and final irrigation. After root sectioning at 3 mm, 6 mm, and 9 mm from the apex, slices were examined under a stereomicroscope, and dentinal defects were recorded. A second examiner reviewed the images. Results: The results showed significant difference of P = 0.031 among Hand files vs. Rotary ProTaper files: In Hand files vs. Reciprocating WaveOne files significant difference was P = 0.048, and for rotary ProTaper files vs. Reciprocating WaveOne files: No significant difference ( P = 0.643). Dentinal defect counts were similar at 3 mm, 6 mm, and 9 mm. Statistically significant variation was observed between hand files and rotary files, as well as hand files and reciprocating files Conclusion: Both rotary and reciprocating files showed a statistically significant increase in dentinal defect incidence compared to hand files. However, clinical implications should be considered cautiously. Instrumentation technique selection should be based on clinical context, operator experience, and patient factors. Further clinical studies are needed for validation.
Evaluation of apical root defects during canal instrumentation with two different nickel-titanium (NiTi) systems by optical coherence tomography (OCT) scan

Chen Chen,Wenxin Zhang,Yuhong Liang

DOI: https://doi.org/10.1016/j.jds.2021.10.009

IF: 3.719

2022-04-01

Journal of Dental Sciences

Abstract:Background/purpose: Canal instrumentation with rotary nickel-titanium (NiTi) instruments might weaken the dentinal wall. This study aims to investigate the apical root defects during canal instrumentation with two NiTi rotary systems by using optical coherence tomography (OCT) scans.Materials and methods: Twenty mandibular incisors were selected and divided into two groups instrumented using HyFlex CM (HCM) and ProTaper Universal (PTU) systems. OCT scans were taken immediately after canal instrumentation with file #25, #30 and #40. Each cross-sectional reconstructed image of 1, 2 and 3 mm from the apex was examined, root cracks were scored, and dentin thickness was measured at 12 sites. The risk sites with dentin thickness less than 0.30 mm were recorded.Results: In HCM group, no cracks were observed after instrumentation with file #30/.06, while in PTU group, root cracks were found in 6 teeth with a total score of 9 after using F3 (#30/.09) (P < 0.05). After file #40, 8 teeth with cracks had a score of 14 in PTU group, while one tooth was observed crack with a score of 1 in HCM group (P < 0.05). The number of risk sites in PTU group was 49 (13.16%), which was significantly more than the 28 (7.78%) in HCM group (P < 0.05) when canals were instrumented with file #30.Conclusion: Within the limitations of this study, when the canals of mandibular incisors were instrumented with size #30 and #40 files, OCT scans showed less root defects in HCM group.

dentistry, oral surgery & medicine
Comparison of Dentinal Defects Induced by Rotary, Reciprocating, and Hand Files in Oval Shaped Root Canal - An In-Vitro Study

Harakh Chand Branawal,Neelam Mittal,Prachi Rani,Aiyman Ayubi,Silviya Samad

DOI: https://doi.org/10.4103/ijdr.ijdr_132_23

2023-10-01

Abstract:Aim: To evaluate and compare the formation of dentinal defects using hand Hedstrom files, XP-Shaper, TruNatomy, and Reciproc Blue file systems when used for oval shaped root canals. Materials and methods: One hundred and five extracted human mandibular premolars with single root and oval canals were selected for the study. Twenty-one teeth were unprepared (control), and the remaining teeth were divided into the prepared groups (n = 21), that is, Group H-Files, Group XP-Shaper, Group TruNatomy, and Group Reciproc Blue. All selected teeth were de-coronated perpendicular to the long axis of the tooth by using a diamond-coated disk with water cooling, leaving root segments approximately 16 mm in length. Each group was prepared according to the above file system. Then all roots were sectioned perpendicular to their long axes at 3, 6, and 9 mm from the apex using a diamond-coated disk under a continuous water stream. Each specimen was then checked for the presence of dentinal defects/microcracks. Result: The XP-Endo shaper group had the lowest number of defects (01/21 roots) 4.7%; TN (04/21) 19%, H-Files (04/21) 19%, and RC Blue (05/21) 23.8% had the highest incidence of defects. However, no significant difference was detected among these groups (P > 0.05). Conclusion: The motor-driven root canal instrumentation with rotary and reciprocating files and hand files may create microcracks in the radicular dentine, whereas the XP-Shaper file system produces minimal or less cracks compared to other tested rotary file systems and H-file instrumentation.
Shaping ability of ProTaper Gold and WaveOne Gold nickel-titanium rotary instruments in simulated S-shaped root canals

Lu Shi,Junling Zhou,Jie Wan,Yunfei Yang

DOI: https://doi.org/10.1016/j.jds.2021.08.008

IF: 3.719

2022-01-01

Journal of Dental Sciences

Abstract:Gold metal technology improves flexibility and the resistance to cyclic fatigue of the endodontic mechanical files. This study compared the performance of ProTaper Gold (PTG) multiple file system and WaveOne Gold (WOG) single file system in simulated S-shaped root canals, which represents one of the most challenging root canal morphology.Forty S-shaped canals (n = 20 canals/per group) in resin blocks were instrumented to an apical size of 0.25 mm using PTG and WOG Primary, respectively. The total amount of resin removal, canal transportation, centering ratio, and the degree of canal straightening were measured in Photoshop CS6 software. Statistical analysis was performed by using Mann–Whitney U-test (α = .05).None of the files fractured during the instrumentation. The WOG group removed significantly less amount of resin at 0, 3, 6, 7 and 9 mm from the apex (P < .05). The WOG group remained more centered in canals at 0 mm from the apex (P < .05). The PTG group showed a better centering ability and less canal transportation at 4, 5 and 6 mm from the apex (P < .05). In the coronal curvature portion, the use of WOG Primary significantly decreased curvature angle and increased radius compared with PTG instruments (P < .05). There was no significant difference between the two groups in terms of the apical curvature angle and radius change (P > .05).The WOG Primary file has a less aggressive dentin cutting and more centered apical preparation. The PTG system is more advantageous in shaping the coronal curvature of S-shaped canal.

dentistry, oral surgery & medicine
9q33.3q34.11 microdeletion: new contiguous gene syndrome encompassing STXBP1, LMX1B and ENG genes assessed using reverse phenotyping

S. Nambot,A. Masurel,S. El Chehadeh,Anne-Laure Mosca-Boidron,C. Thauvin-Robinet,M. Lefebvre,N. Marle,J. Thevenon,S. Perez-Martin,V. Dulieu,F. Huet,G. Plessis,J. Andrieux,P. Jouk,Gipsy Billy-Lopez

DOI: https://doi.org/10.1038/ejhg.2015.202

2015-09-23

European Journal of Human Genetics

Abstract:
Effect of Different Nickel–Titanium Rotary Systems on Dentinal Crack Formation During Root Canal Preparation in Primary Molars: An in Vitro Study

Dena Mahmoud,Nagwa Khattab,Ahmad ELheeny

DOI: https://doi.org/10.21608/edj.2022.132220.2065

2022-07-01

Egyptian Dental Journal

Abstract:ABSTRACT: Mechanical preparation of primary teeth root canals was associated with dentinal micro-cracks that might evolve into vertical root fracture compromising treatment success and shift treatment toward dental extraction. Consequently, the objective of current study was to assess and compare the dentinal crack formation of Kedo-SG Blue file and Wave-One gold to Stainless Steel hand K files after root canal preparation of primary molars. Materials and methods: Seventy-five mandibular second primary molars with two separate and straight mesial canals were chosen and immersed in distilled water. Removal of coronal portions and distal roots of all teeth were carried out utilizing a diamond coated bur with water coolant. All teeth were randomly allocated into three groups (n=25 /each) according instrumentation file: (1) Kedo-SG Blue, (2) Wave-One Gold and (3) Stainless Steel hand files. Then, all specimen were cut perpendicular to the axis of tooth to coronal, middle and apical third, therefor, three slices were obtained from each specimen. Each slice was examined with Environmental Scanning Electron Microscope (E.SEM) to determine the presence/absence of cracks. Statistical analysis was carried out with R statistical analysis software version 4.0.3 for Windows.The level of significance was set at p ≤ 0.05. Results: The majority of samples instrumented with Kedo SG Blue 57(76.0%), Wave one gold 44(58.7%) and Stainless Steel k file 65(86.7%) were free of cracks. Conclusions: Higher percentages of dentinal cracks were seen in the WOG group followed by Kedo-SG Blue group, with lowest percentages recorded for Stainless Steel hand K –files group.
Evaluation of root canal preparation using two nickel–titanium instrument systems via cone-beam computed tomography

Khoa Van Pham,Trang Ngoc Phuong Phan

DOI: https://doi.org/10.4103/sej.sej_147_18

2019-11-22

Saudi Endodontic Journal

Abstract:Aim: The aim of this study was to evaluate the root canal preparation abilities of two nickel–titanium (NiTi) instrument systems, namely WaveOne (WO) and ProTaper Next (PTN), using cone-beam computed tomography (CBCT), on human extracted teeth. Materials and Methods: Eighty mesiobuccal root canals of the maxillary and mandibular first molars with a curvature of 10°–39° were chosen. CBCT images were captured before instrumentation using special silicone molds to ensure that the teeth are positioned at the same place before and after instrumentation. The root canals were divided into two groups, namely Group 1 and Group 2 (40 root canals in each group with similar root canal curvatures). Group 1 and Group 2 were prepared using WO and PTN, respectively. Teeth were inserted again into the previous silicone molds at the right positions. Postinstrumentation CBCT images were captured with the same parameters. Pre- and postinstrumentation CBCT images were analyzed using Invivo 5 software provided by the CBCT machine manufacturer. Results: There was no difference between the two groups of root canals instrumented by two NiTi instrument systems in root canal transportation, centering ratio, straightening, and volume changes ( P > 0.05). Conclusions: Both NiTi instrument systems can be used effectively and safely in root canal instrumentation.
Comparison of Dentinal Defects Formation in Straight, Moderate and Severely Curved Canals by Three Distinctive Nickel Titanium Instruments: An in vitro Study

Azin Alasvand Javadi,Mansour Jafarzadeh,Mohammad Yazdizadeh,Neda Askari Hasanvand,Shadi Nikoo Nejad,Ali Amiri

DOI: https://doi.org/10.30476/dentjods.2022.94475.1787

Abstract:Statement of the problem: It is stated that engine-driven instruments might cause dentinal defects during root canal preparation. These defects might spread and progress into greater fractures or vertical root fracture. Purpose: This study aimed to compare the incidence of dentinal defects that might arise all through preparation of root canals, using One Shape, RaCe, and WaveOne systems in canals with a curvature (0-20°) and (20-40°). Materials and method: In this in vitro study, 150 mandibular first molars were enrolled. Based on the degree of curvature in the mesial roots, the samples were divided into two groups (n=75) of straight and moderately curved canals (0-20º), and severely curved canals (20-40°). Then each group was randomly divided into four sub-groups. In subgroups 1 to 3 from each group, canals were prepared using WaveOne, One Shape, and RaCe. Then all roots were sectioned at 3, 6 and 9-mm distances from the apex. The slices were evaluated using stereomicroscope at 12× magnification. The data were analyzed using the Chi-square and Fisher's exact tests and the level of significance was set at 0.05. Results: Fracture and other defects were not found in the control groups. In canals with curvature (0-20°), WaveOne caused the maximum dentinal defects and RaCe produced the least. Moreover, in canals with curvature (20-40°), One Shape caused the maximum dentinal defects while WaveOne and RaCe caused equal dentinal defects approximately. Conclusion: There was a statistically significant relationship between the performance of RaCe and One Shape in canals with curvature (0-20º) and (20-40º), (pValue< 0.05) while no statistically significant difference was observed in connection to the performance of WaveOne (p> 0.05).
An in vitro comparative evaluation of dentinal crack formation caused by three different nickel-titanium rotary file systems in primary anterior teeth

Bhatt Bhagyashree,Dinesh Rao,Sunil Panwar,Nihal Kothari,Surabhi Gupta

DOI: https://doi.org/10.4103/jisppd.jisppd_100_22

Abstract:Context: Cleaning and shaping of the canals damages the root dentin which becomes a gateway to dentinal cracks and thereby causes failure of the treatment. Aim: The aim of this study was to assess and compare dentinal crack formation caused by three different nickel-titanium (NiTi) rotary file systems in primary anterior teeth. Settings and design: The present in vitro study is an experimental, comparative study. Materials and methods: One hundred fifty extracted primary anterior teeth were included in this study. The teeth were randomly divided into five groups. Group 1: Pedoflex rotary file system, Group 2: Prime Pedo™ rotary file system, Group 3: Kedo-S2 rotary file system, Group 4: K-files, and Group 5: no instrumentation. Roots were sectioned and viewed under a stereomicroscope for the presence of any cracks. Statistical analysis used: The data were analyzed using the Chi-square test and Kruskal-Wallis test. Results: In the coronal, middle, and apical thirds, Group 2 showed a maximum number of crack formations in the middle third (57%), followed by Group 3 (43.3%) and Group 1 (36.7%). Groups 4 and 5 showed no crack formation in all the root sections. The middle third showed a maximum number of crack formations compared to the coronal and apical thirds. Conclusions: Rotary systems render various benefits with an acceptable success in comparison to conventional hand instrumentation. Within the limitation of this study, it was found that Pedoflex rotary file system was the best with the least number of crack formations.
Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments

Taha Özyürek,Vildan Tek,Koray Yılmaz,Gülşah Uslu

DOI: https://doi.org/10.5395/rde.2017.42.4.332

2017-01-01

Abstract:OBJECTIVES: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems.MATERIALS AND METHODS: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with χ2 tests using SPSS 21.0 software.RESULTS: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage.CONCLUSIONS: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.
Rapid identif ication and comparative analysis of chemical constituents in herbal medicine Fufang decoction by ultra-high-pressure liquid chromatography coupled with a hybrid linear ion trap-high-resolution mass spectrometry.

Gang Cao,Xiaocheng Chen,Xin Wu,Qinglin Li,Hongyan Zhang

DOI: https://doi.org/10.1002/bmc.3333

2015-05-01

Abstract:This study was conducted to reveal the relation between herbal medicine Fufang decoction and a single drug in terms of material base. Da-Cheng-Qi decoction (DCQD) was used as a model. Ultrahigh-pressure liquid chromatography coupled with a hybrid linear ion trap-high-resolution mass spectrometry (UHPLC-LTQ-Orbitrap) was applied to detect and identify the main chemical compounds. This technique was also employed to determine the different chemical components. Under optimized liquid chromatography and mass spectrometry conditions, 64 components, including iridoids, flavonoids, anthraquinones and coumarins, were separated and tentatively characterized in Da-Cheng-Qi decoction. After decoction, the contents of 18 compounds were markedly changed, and two components were no longer detected in Fufang decoction compared with single-medicine decoction. The established method provided a good example for the rapid identification of complicated polar constituents in herbal medicine prescriptions.
Comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth: an in vitro study

P Nisar,F Katge,V K Chimata,D Pradhan,D Patil,I Agrawal

DOI: https://doi.org/10.1007/s40368-024-00863-0

Abstract:Purpose: Pulpectomy can be used for the management of deep dentinal carious lesions in primary teeth which can be restored. Mechanical preparation of root canals can be performed using hand or NiTi rotary files. However, this may cause dentinal stress and consequently dentinal microcracks. Hence, the aim was comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth. Methods: 60 extracted primary molar teeth were selected comprising of 80 root canals. Simple random sampling was used to divide root canals into four groups (n = 20): Group A-Hedstrom file, Group B-Pro AF Baby Gold rotary, Group C-ProTaper Next rotary, and Group D-unprepared group. Assessment was conducted on presence or absence of microcracks using Chi square test (p < 0.05). Results: The total number of microcracks in Group A: one (5%), Group B: four (20%), Group C: nine (45%) and Group D: zero (0%) which was statistically significant (p = 0.002). At cervical third, the number of microcracks seen with Group A: one (5%), Group B: zero (0%), Group C: five (25%) and Group D: zero (0%) (p = 0.005). At the middle third, the number of microcracks seen in Group A: zero (0%), Group B: four (20%), Group C: four (20%) and Group D: zero (0%) (p = 0.029). Conclusion: The study concluded that dentinal microcracks are formed with both hand and rotary file systems in primary teeth. ProTaper Next showed significantly higher number of microcracks, followed by ProAF Baby Gold and H files.
Shaping ability of BioRace, ProTaper NEXT and Genius nickel-titanium instruments in curved canals of mandibular molars: a MicroCT study

S Drukteinis,V Peciuliene,P M H Dummer,J Hupp

DOI: https://doi.org/10.1111/iej.12961

Abstract:Aim: To evaluate and compare the canal shaping ability of BioRace, ProTaper NEXT and Genius engine-driven nickel-titanium (NiTi) file systems in extracted mandibular first molars using micro-computed tomography (MCT). Methodology: Sixty mesial root canals of mandibular first molars were randomly divided into three equal groups, according to the instrument system used for root canal preparation (n = 20): BioRace (BR), ProTaper NEXT (PTN) or Genius (GN). Root canals were prepared to the full WL using a crown-down technique up to size 35, .04 taper instruments for BR and GN groups and size 30, .07 taper instruments for the PTN group. MCT was used to scan the specimens before and after canal instrumentation. Changes in dentine volume, the percentage of uninstrumented canal surface and degree of canal transportation were evaluated in the coronal, middle and apical thirds of canals. Data were analysed statistically using one-way analysis of variance and Tuckey's post hoc tests with the significance level set at 5%. Results: There were no significant differences between the three groups in the terms of dentine removed after preparation and determination of the root canal volume, or percentage of uninstrumented canal surface (P > 0.05). No significant differences were found between the systems for canal transportation in any canal third (P > 0.05). Conclusions: The shaping ability of the BR, PTN and GN NiTi file systems was equally effective. All instrumentation systems prepared curved root canal systems with no evidence of undesirable changes in 3D parameters or significant shaping errors.
COMPARATIVE ANALYSIS OF APICAL EXTRUSION OF DEBRIS AND SHAPING ABILITY IN CURVED ROOT CANALS USING FOUR DIFFERENT NITI INSTRUMENTS

Qing Sheng,Wen LI,Yijun Yu,Hanxiao Liu,Xinyi Qiu,Bijun Zhu,Xuna Tang,Leiying Miao

DOI: https://doi.org/10.19193/0393-6384_2022_2_196

2022-01-01

Acta medica mediterranea

Abstract:Introduction: The aim of this study was to evaluate the apical extrusion of debris, apical transportation (AT) and centering ratio (CR) after root canal preparation using Reciproc, ProTaper, ProTaper Next (PTN) and Revo-S. Materials and methods: Sixty extracted human mandibular premolars with a curvature angle of 25 degrees and the same length were randomly divided into four groups (n=15). All root canals were shaped to size of 25: ProTaper Next X2 (Dentsply Maillefer), Reciproc (R25; VDW, Munich, Germany), Revo-S SU (25#, .06; MicroMega, Besancon, France) and ProTaper F2 (25#, .08; Dentsply Maillefer, Ballaigues, Switzerland). All roots were sectioned perpendicularly at 1, 3, 5 and 7 mm from the apex and were scanned by a micro-CT before and after the preparation. During this process, collect the debris of each tooth and weigh it three times consecutively. The amount of apical debris extrusion, AT and CR of teeth were recorded and compared between the groups by using the Kruskal-Wallis test. Results: In terms of extruded debris, all specimens showed apical debris extrusion, and no statistically significant difference was obtained among them (P>.05). In terms of transportation, there was no significant difference among the four groups (P >0.05); in terms of centering ratio, PTN and Revo-S had significantly higher (closer to C=1) centreing ratios than Reciproc and ProTaper. There was a significant difference between PTN and ProTaper (P<0.05), PTN and Reciproc (P<0.05), ProTaper and Revo-S (P<0.05) at 3 mm and 5 mm from the apical surface, but there was no significant difference in the mean centering ratio at 1 mm or 7 mm from the apical surface among the four groups. Conclusion: ProTaper Next and Revo-S prepared a more centered root canal shapes. All instruments caused extrusion of debris through the apex.
Occurrence and solution to overcome 1st RESET resistance pinning effect in Ti/HfOx based RRAM for low power nonvolatile memory applications

S. Z. Rahaman,Heng-Yuan Lee,Yu-De Lin,Chien-Hua Hsu,K. Tsai,Weisu Chen,Yu-Sheng Chen,Pang-Shiu Chen,Pei-Hua Wang

DOI: https://doi.org/10.1109/VLSI-TSA.2017.7942471

2017-04-01

Abstract:In summary, we have optimized the operation current to obtain stable endurance and retention properties in Ti/HfOx based bipolar RRAM for future low power nonvolatile memory applications. Furthermore, the 1st RESET resistance pinning effect after the FORMING process at lower current is greatly improved by selecting the Ti/HfOx thickness ratio in TiN/Ti/HfOx/TiN 1T1R RRAM. Thus, in order to achieve the reliable switching at low operation current, the design of the memory element is crucial.
Comparison of the incidences of apical root cracks after canal preparation with two nickel-titanium rotary systems:an in vitro study

Chen CHEN,Yu-hong LIANG,Xue-jun GAO

DOI: https://doi.org/10.3969/j.issn.1671-167X.2015.01.024

2015-01-01

Abstract:Objective: To compare the incidences of root cracks after canal instrumentation with HyFlex CM system and the ProTaper Universal system .Methods:Sixty mandibular incisors were mounted in resin blocks with simulated periodontal ligaments , and the apex was exposed .The control group of 20 teeth was not prepared , and the other 40 teeth were divided into 2 experimental groups ( n=20 ) .The 40 root canals of the experimental groups were instrumented using HyFlex CM and ProTaper Universal to the major apical foramen ( AF).The horizontal sections 1 mm, 2 mm, and 3 mm from the apex were observed under an optical stereomicroscope at 25 ×magnification .The presence of cracks was noted . Results:No cracks were found in the control teeth .Cracks were found in 1 of 20 ( 5%) teeth in HyFlex CM group , and 17 of 20 ( 85%) teeth in ProTaper Universal group .The difference between the two experimental groups was statistically significant (P<0.01).Conclusion: The HyFlex CM files caused fewer root cracks than the ProTaper Universal files during the root canal instrumentation .
Multidimensional Analysis of Curved Root Canal Preparation Using Continuous or Reciprocating Nickel-titanium Instruments

Iussif Mamede-Neto,Álvaro Henrique Borges,Ana Helena Gonçalves Alencar,Marco Antonio Hungaro Duarte,Manoel Damião Sousa Neto,Carlos Estrela

DOI: https://doi.org/10.2174/1874210601812010032

2018-01-29

Abstract:Objective: To evaluate transportation (T) and centering ability (CA) of root canal preparations using continuous or reciprocating nickel-titanium endodontic files. Materials and methods: Ninety-six mesiobuccal root canals of mandibular first and second molars were randomly divided into 6 groups (n=16) according to the rotary file used: 1. ProTaper Next; 2. ProTaper Gold; 3. Mtwo; 4. BioRaCe; 5. WaveOne Gold; 6. Reciproc. Root canals were prepared according to manufacturer's instructions. Cone beam computed tomography scans were obtained before and after root canal preparation. Measurements were made at six different reference points: 2, 3 and 4 mm from the apex and 2, 3 and 4 mm below furcation in different directions. Results: The greatest Mesiodistal (MD) Transportation (T) was found for Reciproc files (p<0.05), and the greatest buccolingual (BL) T, for Reciproc, ProTaper Gold and ProTaper Next files (p<0.05). The greatest Mesiodistal (MD) Centering Ability (CA) was found for BioRaCe files (p<0.05), and the greatest Buccolingual (BL) CA, for BioRaCe and Mtwo files (p<0.05). Conclusion: All systems produced root canal transportation. No file system achieved perfect CA of root preparation. Reciproc files had the greatest MD T and BL T. BioRaCe files had the greatest MD CA, whereas BL CA was similar for BioRaCe and Mtwo files.
Relaxation network for Gabor image decomposition

T. Pattison

DOI: https://doi.org/10.1007/BF00201806

IF: 3.072

1992-05-01

Biological Cybernetics

Abstract:
NiTi loss on the dentinal walls and instrument deformation during root canal preparation

Carolina Fabiana Centenaro,Fabiana Soares Grecca,Patrícia Maria Poli Kopper,Rodrigo Ricci Vivan,Jefferson Ricardo Pereira,Ricardo Abreu da Rosa,Paula Barcellos da Silva,Marcus Vinícius Reis Só

DOI: https://doi.org/10.1002/jemt.23053

2018-05-13

Microscopy Research and Technique

Abstract:The purpose of this study was to quantify the presence of nickel (Ni) and titanium (Ti) on dentin walls of prepared root canals using Endosequence (ES) and Wave One (WO) systems, the deformation, and fracture of these instruments. Thirty extracted human premolar teeth were selected and prepared with WO, ES, and manually (control group-CG). Each instrument was used in four root canals. The root canals were irrigated with 2.5% sodium hypochlorite solution. After preparation, roots were sectioned longitudinally and the apical third was analyzed by scanning electron microscopy with X-ray microanalysis (SEM-EDS). The percentage of Ni and Ti found on dentin walls was compared using Kruskal-Wallis test and post hoc Dunn. The instruments deformation and fracture was evaluate by SEM before and after use. Spiral distortion, fractures, and surface wear were compared using Mann-Whitney test. The level of significance was set at 5%. Ni and Ti were found on the dentin walls of the apical root canal for ES and WO systems (p > .05). No distortion in the spirals and no instrument fracture were observed. Regarding to surface wear, most of the instruments scored as moderate wear (p > .05). This study concluded the WO and ES presented Ni and Ti loss. In addition, the preparation of four root canals did not caused irreversible deformation in WO and ES instruments.

biology,microscopy,anatomy & morphology

[Permanent pacemaker placement in a persistent left superior vena cavae anomaly: transvenous or epicardial approach].

Comparative Evaluation of Dentinal Defects After Root Canal Preparation Using Various Nickel Titanium Files: An In Vitro Study

Microscopic Evaluation of Dentinal Defects after Root Canal Preparation with Different Hand and Nickel-Titanium Files; An In Vitro Study

Evaluation of apical root defects during canal instrumentation with two different nickel-titanium (NiTi) systems by optical coherence tomography (OCT) scan

Comparison of Dentinal Defects Induced by Rotary, Reciprocating, and Hand Files in Oval Shaped Root Canal - An In-Vitro Study

Shaping ability of ProTaper Gold and WaveOne Gold nickel-titanium rotary instruments in simulated S-shaped root canals

9q33.3q34.11 microdeletion: new contiguous gene syndrome encompassing STXBP1, LMX1B and ENG genes assessed using reverse phenotyping

Effect of Different Nickel–Titanium Rotary Systems on Dentinal Crack Formation During Root Canal Preparation in Primary Molars: An in Vitro Study

Evaluation of root canal preparation using two nickel–titanium instrument systems via cone-beam computed tomography

Comparison of Dentinal Defects Formation in Straight, Moderate and Severely Curved Canals by Three Distinctive Nickel Titanium Instruments: An in vitro Study

An in vitro comparative evaluation of dentinal crack formation caused by three different nickel-titanium rotary file systems in primary anterior teeth

Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments

Rapid identif ication and comparative analysis of chemical constituents in herbal medicine Fufang decoction by ultra-high-pressure liquid chromatography coupled with a hybrid linear ion trap-high-resolution mass spectrometry.

Comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth: an in vitro study

Shaping ability of BioRace, ProTaper NEXT and Genius nickel-titanium instruments in curved canals of mandibular molars: a MicroCT study

COMPARATIVE ANALYSIS OF APICAL EXTRUSION OF DEBRIS AND SHAPING ABILITY IN CURVED ROOT CANALS USING FOUR DIFFERENT NITI INSTRUMENTS

Occurrence and solution to overcome 1st RESET resistance pinning effect in Ti/HfOx based RRAM for low power nonvolatile memory applications

Comparison of the incidences of apical root cracks after canal preparation with two nickel-titanium rotary systems:an in vitro study

Multidimensional Analysis of Curved Root Canal Preparation Using Continuous or Reciprocating Nickel-titanium Instruments

Relaxation network for Gabor image decomposition

NiTi loss on the dentinal walls and instrument deformation during root canal preparation