Abstract:Increasing the use of steel scrap and enhancing its recycling utilization are important strategies for fostering the low-carbon and environmental-friendly growth of the iron and steel industry in China. However, the current steelmaking processes cannot efficiently remove the residual elements in the scrap, such as Cu, Sn, As, and Sb. As a result, the above elements are recycled and accumulate in the scrap, which will eventually have a negative impact on the properties of steel. Currently, there are few studies on Sb removal from molten steel. To remove the residual element Sb in molten steel, the CaO-SiO2-Al2O3 refining slag system containing CaC2 was used, and the effect of the CaC2 content in the molten slag, slag quantity, smelting temperature, and initial Sb and C contents in molten steel on the Sb removal ratio in the steel was investigated, and the mechanism of Sb removal by the aforementioned refining slag system was discussed in order to provide some experimental and theoretical basis for industrialization practice. When the smelting time is 5~10 min, the removal ratio of Sb from molten steel is at its peak and can reach 45.8%. The "Sb-reversion" phenomenon will appear in the molten steel when the smelting period is progressively extended. In molten steel, CaC2 will preferentially react with O and S, and as the smelting temperature decreases, the distribution ratio of Sb, LSb, improves. An increased initial Sb content in molten steel and slag quantity are beneficial to improving the removal ratio of Sb, but an increased initial C content in molten steel is detrimental to the progress of the Sb removal reaction. The removal reaction of Sb from molten steel by CaC2 is a reversible reaction, and the diffusion of the products from the interface is the limiting factor of the overall reaction.

Effect of Steel-refractory Reactions on Removal of Arsenic from Molten Steel with Lanthanum Additions

Evolution of Inclusions in Steelmaking Process of Rare Earth Steels Containing Arsenic with Alumina Crucibles

Considerations of Removing Arsenic from Molten Steel by Adding Rare Earth Elements

Effect Of Heterogeneous Nucleation On Removal Of Arsenic From Molten Steel By Rare Earth Addition

Distribution Of Arsenic Inclusions In Rare Earth Steel Ingots

An in Situ Study of the Formation of Rare Earth Inclusions in Arsenic High Carbon Steels

Steel–refractory reactions in lanthanum-, cerium-, and yttrium-added steels

Effect of Rare Earth Ce Addition on Inclusions in Offshore Engineering Steel Containing Arsenic

Theoretical Analysis and Experimental Verification of Formation of As-Bearing Rare Earth Inclusions in Steel

Diffusion of Lanthanum/Cerium/Manganese in Rare‐Earth Heavy Rail Steel at the Refractory Interface

Selective Separation Of Arsenic From Lead Smelter Flue Dust By Alkaline Pressure Oxidative Leaching

Evolution and Formation of Non-metallic Inclusions During Electroslag Remelting of a Heat-Resistant Steel for Ultra-supercritical Power Plants

Formation of ferrospinel layer at the corroded interface between Al 2 O 3 ‐spinel refractory and molten steel in RH refining ladle

Effects of Li2O and Na2O on the Crystallization Behavior of Lime-Alumina-Based Mold Flux for Casting High-Al Steels

Effect of lanthanum on inclusions in non-oriented electrical steel slabs

Effect of roasting activation of rare earth molten salt slag on extraction of rare earth, lithium and fluorine

Sulfide Inclusions in an Al‐Killed Nonoriented Electrical Steel with Lanthanum Addition

Influence of Slag and Refractory Materials on Inclusions during the Ladle Refining of Low Carbon Aluminum Killed Steel

Removal of Residual Element Antimony from Molten Steel by CaC2-Containing Refining Slag

Ultrasonic-enhanced selective arsenic removal and sulfide conversion from iron slag

Agglomeration behavior of rare earth inclusions and alumina inclusions at the interface between argon and molten steel