Abstract:Aiming to decouple the inherent relationship between mass transfer and heat transfer in traditional arc-based directed energy deposition, a novel heterogeneous multi-wire indirect arc directed energy deposition (DED) has been developed for in-situ synthesis of Al-Zn-Mg-Cu alloy components. Multi-wires (Al-Cu and Al-Mg) with a bypassing Zn wire have been used to replace the traditional homogeneous twin-wires. The process, micro-structure and mechanical properties of the deposited Al-Zn-Mg-Cu alloy components obtained by multi-wire indirect arc DED were investigated. The results indicate that the wire feeding speed, current and angle be-tween the two wires have a significant influence on the multi-wire indirect arc DED process. When the current was 200 A, the different wire feeding speeds could be used for both wires and the angle between them was 90 degrees. The resulting indirect arc presented a 'heart' shape and allowed to obtain an Al-5.7Zn-3.4Mg-1.6Cu (wt%) alloy with a high deposition rate of 5.1 kg/h. The Al-5.7Zn-3.4Mg-1.6Cu alloy is mainly composed of & alpha;-Al, S (Al2CuMg), & eta; (Mg (Al, Zn, Cu)2) and & eta;& PRIME; phases. The composition and phases are in accordance with the 7xxx series aluminum alloys. The microstructure is dominated by columnar and equiaxed grains, and it has obvious periodic distribution along the building direction, which is related to the process thermal cycle. Fine second phases & eta;& PRIME; are observed to precipitate during the manufacturing process. Furthermore, the average hardness, ultimate tensile strength and elongation of the fabricated material are 98.6 HV, 243.9 MPa and 5.9%, respec-tively. These mechanical properties are higher than those of as-cast 7050 aluminum alloy, thus showing the potential of this new process variant to fabricate high strength Al alloys in the as-deposited state. The fracture morphology exhibit features mainly associated to a ductile-like fracture, accompanied by some transgranular and partial cleavage fracture characteristics. This novel multi-wire indirect arc DED provides a new choice for arc -based directed energy deposition of Al-Zn-Mg-Cu alloys and shows great potential for the in-situ synthesis of other high-performance alloys.

Investigation on High-deposition-rate Directed Energy Deposition of Al-5%Mg Alloy Via External Compound Magnetic Fields

Parallel Multi Arc Directed Energy Deposition: New Way to Achieve Efficient Manufacturing of Large-Size Lattice Sandwich Structure

A Novel Heterogeneous Multi-Wire Indirect Arc Directed Energy Deposition for In-Situ Synthesis Al-Zn-Mg-Cu Alloy: Process, Microstructure and Mechanical Properties

Basic Research of Directed Energy Deposition for Aluminum 4043 Alloys Using Pulsed Variable Polarity Gas Metal Arc Welding

Study on the impact of external magnetic field intensity on droplet behaviour, heat build-up and dimensional accuracy in wire-arc DED

Laser Directed Energy Deposition of an AlMgScZr-Alloy in High-Speed Process Regimes

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Directed energy deposition of Al-Mg-Si alloys with fully-equiaxed microstructure and isotropic high strength/ductility

Wire-arc directed energy deposited Mg-Al alloy assisted by ultrasonic vibration: Improving properties via controlling grain structures

Multi-regional Microstructure Control Using Ultrasonic-Assisted Directed Energy Deposition for Al-Cu Alloy

Investigations of the processing–structure–performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition

Investigation of bypass-coupled double-pulsed directed energy deposition of Al–Mg alloys

A novel directed energy deposition-arc method of deposition layer without focused thermal energy heating: droplet transfer, morphology and microstructure

Microstructure and mechanical properties of a dilute Mg-Gd-Y-Zr alloy fabricated using wire-arc directed energy deposition additive manufacturing

Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by multi-wire arc-based directed energy deposition

Multiple Process Microstructure Evolution Simulation of Ultrasonic Assisted Rolling Directed Energy Deposition

Microstructural Evolution and Strengthening Mechanism of Mg-Y-RE-Zr Alloy Fabricated by Quasi-Directed Energy Deposition

Preparation and characterization of CMT wire arc additive manufacturing Al-5%Mg alloy depositions through assisted longitudinal magnetic field

Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

Improved Properties of Wire Arc Directed Energy Deposited Thin-Walled Al-6Mg-0.3Sc Component Via Laser Shock Peening

Numerical simulation on melt pool and solidification in the direct energy deposition process of GH3536 powder superalloy