Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental Investigation on Energy Conservation Performance of Finned-Tube Refrigeration Heat Exchanger with Circular Holes

Energy conservation performance of finned-tube heat exchanger under frosting condition

Experimental Study on High-efficient Evaporator in Large Quick-freeze Equipment

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Experimental study on high efficiency evaporator in a large quick-freeze equipment

Comparative research on the heat transfer efficiency of evaporators with different structures used in a large quick-freeze plant

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Heat transfer of laminar oscillating flow in finned heat exchanger of pulse tube refrigerator

An Experimental study of low-temperature finned-tube heat exchanger in frosting conditions

Experimental Study on the Frosting and Heat Transfer Performance of Three Rows of Variable Pitch Finned Coils

A modeling study of spatial and temporal frost growth on the edge of windward fins for a tube-finned heat exchanger

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study of Frost Formation on Cold Surfaces with Various Fin Layouts

Experimental Study of the Air Side Performance of Fin-and-Tube Heat Exchanger with Different Fin Material in Dehumidifying Conditions

Numerical simulation on the frosting and heat transfer characteristics of plate-fin heat exchanger considering confinement effect

Experimental investigation on frosting performance of a microchannel heat exchanger in heat pump system for electric vehicles

Experiment on Forced Convection-Condensation Heat Transfer Characteristics Based on Finned Plate Configuration

Numerical Investigation of Heat Transfer Performance and Structural Optimization of Fan-Shaped Finned Tube Heat Exchanger

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Performance Improvement of Microchannel Heat Exchangers with Modified Louver Fins under Frosting Conditions

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger