Organising dietary education in a general practice setting.

J. Brown,M. Douglas,J. James

1992-08-01

Abstract:

What problem does this paper attempt to address?

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Linghui Yan,Liangliang Jiang,Chao Qian,Shaodong Zhou

DOI: https://doi.org/10.1016/j.enrev.2023.100065

2024-01-01

Energy Reviews

Abstract:Methane has gained significant attention due to its abundant reserves and notable greenhouse effect. Electrocatalytic conversion of methane is an efficient and green pathway proceeding under mild conditions. However, the low solubility of methane in aqueous electrolytes imposes mass transfer limitations, leading to low current densities in electrocatalytic reactions and hindering large-scale production. This paper discusses the recent progress in quite a few aspects of electrocatalytic conversion of methane. Firstly, the reaction mechanisms involved in methane electrocatalysis are summarized, including dehydrogenation and C–H bond cleavage mediated by the active species. Next, we discuss how to promote electrochemical methane conversion regarding both the reaction process and mass transfer from the perspective of chemical engineering. Considerable efforts have been done to enhance the reaction process, including developing efficient electrocatalysts and devices. Meanwhile, the enhancement of transport processes via, e.g. improving the solubility of methane and modification on the transport area and distance, also facilitates more efficient methane conversion. Finally, an outlook on future development challenges is provided.
Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Peng Li,Jun Wang,Xiuxia Zhang,Xinmei Hou,Bingji Yan,Hongwei Guo,Seshadri Seetharaman

DOI: https://doi.org/10.1016/j.ijhydene.2017.04.046

IF: 7.2

2017-01-01

International Journal of Hydrogen Energy

Abstract:The skimmed hot dross generated in secondary production of aluminum contains high amount of metallic aluminum and also the potential heat. An innovative process for hydrogen generation using skimmed hot dross from aluminum remelting industry is proposed in this work. The reaction behavior between skimmed dross and water steam in terms of hydrogen evolution variation at high temperature is studied. The results show that the inherent salts in the dross could accelerate the hydrogen generation at temperature region of 600850 degrees C by dissolving the amorphous and gamma-Al2O3 product layer in water steam atmosphere. The maximum aluminum conversion degree was found to be more than 60%, and the hydrogen evolution rate was over 60 cm(3) g-(1)min-(1) when skimmed dross with 30 wt% Al was used in non-isothermal test. The mechanism related to the texture responding of alumina layer with different amount of salts additives and temperatures is discussed. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Low-carbon hydrogen production via molten salt methane pyrolysis with chemical looping combustion: Emission reduction potential and techno-economic assessment

Yangdong He,Bin Song,Xingsheng Jing,Yin Zhou,Honggang Chang,Wei Yang,Zeai Huang

DOI: https://doi.org/10.1016/j.fuproc.2023.107778

IF: 8.129

2023-04-30

Fuel Processing Technology

Abstract:Methane pyrolysis , as a bridge for the transition from fossil fuel to renewable energy, is regarded as a potential low-carbon hydrogen production method. However, there are still critical issues such as the deactivation of catalyst carbon deposits and indirect greenhouse gas emissions caused by combustion for heating. Accordingly, this study put forward a methane pyrolysis system by melting method coupled with chemical looping combustion (MPM-CLC) for heating, aiming to solve the above-mentioned concerns and further demonstrate the thermodynamic and economic feasibility of the system. Thermodynamically, more than 27% of fuel energy input and more than 98% of CO 2 emissions can be avoided in the novel system compared with that in conventional standalone production system. The overall system exergy efficiency was calculated to be 85.06%, with CO 2 emissions of about 0.51 kg/MWh. Economically, due to lower total equipment costs and lower additional fuel requirements, as well as profit from by-product solid carbon and electricity sales, the levelized cost of hydrogen (LCOH) is only 1.12 $/kg, which is 33% lower than that of steam methane reforming (SMR) and 52% lower than that of SMR with carbon capture. Moreover, although increasing the conversion rate will increase the fuel and total investment costs, the benefits brought by the increased by-product output could offset this part of the cost and help further reduce the LCOH. Importantly, the price of solid carbon played a decisive role in the LCOH. This new system brings a new insight into the low-carbon hydrogen production from methane.

energy & fuels,engineering, chemical,chemistry, applied
Bounded Depth Broadcasting

D. B. Peters,J. Peters

DOI: https://doi.org/10.1016/0166-218X(94)00165-A

IF: 1.254

1996-05-20

Discrete Applied Mathematics

Abstract:
Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Yancheng Wang,Qiong Wu,Deqing Mei,Yidong Wang

DOI: https://doi.org/10.1016/j.ijhydene.2020.06.285

IF: 7.2

2020-01-01

International Journal of Hydrogen Energy

Abstract:Methanol steam reforming (MSR) has been regarded as a promising hydrogen supply method for proton exchange membrane fuel cell (PEMFC), while the efficiency for hydrogen production and integration method of MSR with PEMFC are two major challenges for commercial applications. Here, we present a highly efficient MSR system for hydrogen production and supply for low temperature PEMFC (LT-PEMFC). The MSR system has a highly compact microreactor, wherein MSR, methanol combustion, and CO selective methanation reactions occur. The CO selective methanation is used to reduce the content of CO concentration to remit the CO poison, then the reformate of MSR system is mixed with air and supply for the LT-PEMFC. Then, experimental tests are conducted to investigate the effects of operating parameters on hydrogen production. A staged supply strategy is proposed, it enables to startup the system within 11.2 min and with methanol consumption of 34.72 g. Results show that the methanol conversion can reach up to 93.0% and system's energy efficiency of 76.2%. After integration with a LT-PEMFC, a maximum 160 W electricity can be generated. The results obtained in this study demonstrated that the developed MSR system can be used to supply hydrogen for LT-PEMFC and able to power mobile device requiring hundreds of watts power consumption. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Electrolytic Methane Production from Reactive Carbon Solutions

Eric W. Lees,Alyssa Liu,Justin C. Bui,Shaoxuan Ren,Adam Z. Weber,Curtis P. Berlinguette

DOI: https://doi.org/10.1021/acsenergylett.2c00283

IF: 22

2022-04-19

ACS Energy Letters

Abstract:We report an electrochemical reactor that converts 3.0 M KHCO3 into methane at the cathode, and oxidizes water at the anode. The molar ratio of methane product to unreacted CO2 gas (defined herein as “methane yield”) was measured to be 34% at a partial current density of 120 mA cm–2. The highest previously reported CO2-to-methane yield is 3%. Our reactor achieved this improvement in methane yield because it is fed with 3.0 M KHCO3, a type of reactive carbon solution, rather than gaseous CO2. The reactor uses H+ delivered by a bipolar membrane to form CO2 at the cathode. This CO2 is subsequently reduced into methane. A cationic surfactant added to the catholyte suppressed hydrogen evolution and increased methane formation. A 1D continuum model confirmed that H+ from the membrane promotes the formation of methane over multicarbon products at the cathode. These findings present design principles for electrochemical methane synthesis.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Critical insights into eutectic molten hydroxide electrolysis for sustainable green hydrogen production

Farooq Sher,Imane Ziani,Nawar K. Al-Shara,Alexander Chupin,Nađa Horo,Bohong Wang,Saba Rahman,Bilal Fareed,Monica R. Nemțanu

DOI: https://doi.org/10.1039/d4se01060d

IF: 6.813

2024-09-01

Sustainable Energy & Fuels

Abstract:In addressing global energy demands, the focus on hydrogen gas production from renewable sources intensifies. This research review investigates hydrogen production via steam splitting using eutectic molten hydroxide (NaOH-KOH%) electrolysis, a promising solution for escalating energy needs. A pivotal aspect involves developing a novel reference electrode for eutectic molten hydroxide, enveloping Ni/Ni(OH)2 with an alumina or mullite tube ionic membrane. The mullite-covered electrode proves stable and reusable from 225 to 300°C, showcasing a novel advancement in electrochemical stability. Compared to silver and platinum quasi-reference electrodes, the designed reference electrode demonstrates superior stability and efficacy in controlling the platinum working electrode, marking a significant innovation. Moreover, an intriguing cyclic voltammetry study examines different working electrodes, including Ni, Pt, Ag, Mo, and stainless steel (SS) in eutectic molten hydroxide at different temperature conditions. The observed reduction potential for hydrogen evolution follows the order: Ni > Pt > Ag > SS > Mo, corroborated by chronoamperometry, underscoring the reliability of the findings. In the pursuit of high-temperature eutectic molten hydroxide electrolysis to split steam into hydrogen fuel, cathodes of nickel, platinum, and stainless steel are deployed alongside stainless steel and graphite anodes. Operating within the temperature range of 225 to 300 °C and applying voltages ranging from 1.5 to 2.5 V, stainless steel as an anode yields impressive current efficiencies at 300 °C: 90.5, 80 and 68.6% for nickel, stainless steel, and platinum cathodes, respectively. This study positions steam splitting via molten hydroxides as a promising alternative for hydrogen production, poised for integration with renewable energy sources, marking a transformative step in sustainable energy practices.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Water-Dissociation-Assisted Electrolysis for Hydrogen Production in a Salinity Power Cell

Xia Chen,Chenxiao Jiang,Muhammad Aamir Shehzad,Yaoming Wang,Hongyan Feng,Zhengjin Yang,Tongwen Xu

DOI: https://doi.org/10.1021/acssuschemeng.9b02131

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Salinity gradient power (SGP) has attracted extensive research interests as a renewable energy source. Compared with energy generated from solar and wind, the direct adoption of SGP is currently impractical. Splitting water in salinity-gradient-power driven reverse electrodialysis appears to be an effective way to utilize such energy, producing high-purity H-2, which could then serve as fuel or essential feedstock. However, H-2 production on the electrode is passivated by the high water-splitting voltage and the electrode overpotentials. Here in this work, we report a novel water-dissociation-assisted hydrogen production in a salinity gradient power system, by introducing bipolar membrane as the key element. The results indicate that the thermodynamic water-splitting voltage was shifted from 1.23 to 0.4 V, producing H-2 at 5.6 L.h(-1).m(-2)-electrode with a hydrogen-conversion efficiency of up to 91 +/- 6%. We envision that the produced H-2 can be exploited for ammonia and synthetic gas/liquid production, contributing to a net-zero emission energy system.
Use of an Intermediate Solid-State Electrode to Enable Efficient Hydrogen Production from Dilute Organic Matter

Desheng Kong,Xing Xie,Zhiyi Lu,Meng Ye,Zhenda Lu,Jie Zhao,Craig S. Criddle,Yi Cui

DOI: https://doi.org/10.1016/j.nanoen.2017.07.024

IF: 17.6

2017-01-01

Nano Energy

Abstract:Molecular hydrogen, a valuable clean energy fuel and industrial feedstock, is commonly produced by steam reforming of fossil fuels, a process that results in the co-generation of CO2. Strategies that produce H2 without CO2 emissions focus on water-splitting powered by solar or wind energy. Here, we introduce a new approach in which energy derived from the oxidation of waste organic matter is used to subsidize the electrical energy consumed by electrochemical H2 generation. The primary gas product is H2, with minimal O2 contamination, avoiding the purification step required for conventional water electrolysis. The energy efficiency (i.e., energy from H2 combustion ÷ input electrical energy × 100%) ranges from 214% to 304%. We also demonstrate a sustained cycling operation with concomitant treatment of domestic and industrial wastewater. These findings open the door to recovery of H2 from other dilute reservoirs of organic matter, such as marine sediment.
Electrified methane steam reforming on a washcoated SiSiC foam for low‐carbon hydrogen production

Lei Zheng,Matteo Ambrosetti,Daniele Marangoni,Alessandra Beretta,Gianpiero Groppi,Enrico Tronconi

DOI: https://doi.org/10.1002/aic.17620

IF: 4.167

2022-02-07

AIChE Journal

Abstract:In view of largely available renewable electricity as a green future resource, here we report the electrification of a Rh/Al2O3 washcoated SiSiC foam for methane steam reforming (MSR). We show that, thanks to the suitable bulk resistivity of the SiSiC foam, its direct Joule heating up to relevant temperatures is feasible; the interconnected geometry greatly reduces heat and mass transfer limitations, which results in a highly active and energy efficient system for low-carbon H2 production. The foam-based electrified MSR (eMSR) system showed almost full methane conversion above 700°C and methane conversions approaching equilibrium were obtained in a range of conditions. Energy efficiency as high as 61% and specific power consumption as low as 2.0 kWh/ <math><mi>N</mi> <msubsup><mi>m</mi> <msub><mi>H</mi> <mn>2</mn></msub> <mn>3</mn></msubsup> </math> were measured at 650°C, at gas hourly space velocity (GHSV) of 150,000 cm3/h/gcat. When driven by renewable electricity, the proposed reactor configuration promises a high potential to address the decarbonization challenge in the near-term future.

engineering, chemical
Energy, environment, and economic analyses on a novel hydrogen production method by electrified steam methane reforming with renewable energy accommodation

Huchao Song,Yinhe Liu,Hao Bian,Mengfei Shen,Xiaolong Lin

DOI: https://doi.org/10.1016/j.enconman.2022.115513

IF: 10.4

2022-04-01

Energy Conversion and Management

Abstract:More and more attention has been paid to hydrogen due to its cleanity and high energy density. However, hydrogen production from conventional steam methane reforming has high CO2 emission and heat loss in the flue gas. Hydrogen from water electrolysis has the defects of high cost and low efficiency. Electrified steam methane reforming (E-SMR) process is proposed by integrating power to gas technology with steam methane reforming based on the principle of efficient electrothermal conversion and energy cascade utilization. Electrical equipment is used in the process to eliminate the above drawbacks and accommodate renewable electricity. The novel process is simulated by chemical equilibrium and mass-energy conservation methods and analyzed from energy, environment, and economy. The optimal performance of E-SMR processes is investigated by adjusting the steam carbon ratio and reforming temperature under appropriate pressure. The optimal thermal efficiency (97.27 %) is improved by 18 percentage points at least compared to current industrial steam methane reforming processes. The optimal electrical efficiency (88.68 %) is at least 11.48 percentage points higher than that of running commercial water electrolysis systems. The novel process achieves low carbon emission (even zero-emission with CCS) since the required reforming energy is electricity instead of combustion. The cost of the proposed process can be minimized to 2.47 $/kg H2 through economic analysis. This work may provide an efficient, low-carbon, and economical option for hydrogen production.

energy & fuels,thermodynamics,mechanics
Production of Sustainable Methane from Renewable Energy and Captured Carbon Dioxide with the Use of Solid Oxide Electrolyzer: A Thermodynamic Assessment

Jan Pawel Stempien,Meng Ni,Qiang Sun,Siew Hwa Chan

DOI: https://doi.org/10.1016/j.energy.2015.01.081

IF: 9

2015-01-01

Energy

Abstract:A possible pathway for renewable and sustainable methane production from captured carbon dioxide, water (or seawater) and renewable electricity is proposed and analysed. The proposed system includes Solid Oxide Electrolyzer Cell combined with ex-situ methane synthesis reactor comprising Sabatier, Methanation and Water-Gas Shift reactions. A well validated electrochemical model is used to describe the behaviour of the electrolyzer for steam/carbon dioxide co-electrolysis. The methane synthesis reactor is modelled by a set of equations based on thermodynamic equilibrium reaction constants. Effects of current density, temperature, pressure and initial steam to carbon dioxide ratio on system performance are analysed and their effects are discussed. It is found that a simple, single-pass system without heat recuperation could achieve a maximum overall energy efficiency of 60.87% (based on lower heating value), a maximum electrical energy efficiency of 81.08% (based on lower heating value), and a maximum amount of methane production of similar to 1.52 Nm(3) h(-1) m(-2) of electrolyzer. It is also found that conversion of similar to 100% captured carbon dioxide is possible in the proposed system. (C) 2015 Elsevier Ltd. All rights reserved.
Hydrogen Sulfide Splitting into Hydrogen and Sulfur through Off-Field Electrocatalysis

Zijin Wang,Qing-Nan Wang,Weiguang Ma,Tiefeng Liu,Wei Zhang,Panwang Zhou,Mingrun Li,Xinyi Liu,Qingbo Chang,Haibing Zheng,Ben Chang,Can Li

DOI: https://doi.org/10.1021/acs.est.4c00312

IF: 11.4

2024-04-17

Environmental Science & Technology

Abstract:Hydrogen sulfide (H(2)S), a toxic gas abundant in natural gas fields and refineries, is currently being removed mainly via the Claus process. However, the emission of sulfur-containing pollutants is hard to be prevented and the hydrogen element is combined to water. Herein, we report an electron-mediated off-field electrocatalysis approach (OFEC) for complete splitting of H(2)S into H(2) and S under ambient conditions. Fe(III)/Fe(II) and V(II)/V(III) redox mediators are used to fulfill the...

environmental sciences,engineering, environmental
[The schizophrenia concept].

D. Hell

Abstract:
Electrocatalytic Water Splitting: From Harsh and Mild Conditions to Natural Seawater

Xue Xiao,Lijun Yang,Wenping Sun,Yu Chen,Hai Yu,Kangkang Li,Baohua Jia,Lei Zhang,Tianyi Ma

DOI: https://doi.org/10.1002/smll.202105830

IF: 13.3

2021-12-08

Small

Abstract:Electrocatalytic water splitting is regarded as the most effective pathway to generate green energy-hydrogen-which is considered as one of the most promising clean energy solutions to the world's energy crisis and climate change mitigation. Although electrocatalytic water splitting has been proposed for decades, large-scale industrial hydrogen production is hindered by high electricity cost, capital investment, and electrolysis media. Harsh conditions (strong acid/alkaline) are widely used in electrocatalytic mechanism studies, and excellent catalytic activities and efficiencies have been achieved. However, the practical application of electrocatalytic water splitting in harsh conditions encounters several obstacles, such as corrosion issues, catalyst stability, and membrane technical difficulties. Thus, the research on water splitting in mild conditions (neutral/near neutral), even in natural seawater, has aroused increasing attention. However, the mechanism in mild conditions or natural seawater is not clear. Herein, different conditions in electrocatalytic water splitting are reviewed and the effects and proposed mechanisms in the three conditions are summarized. Then, a comparison of the reaction process and the effects of the ions in different electrolytes are presented. Finally, the challenges and opportunities associated with direct electrocatalytic natural seawater splitting and the perspective are presented to promote the progress of hydrogen production by water splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Xiao Li,Lingzhi Yang,Yong Hao

DOI: https://doi.org/10.3390/en16207134

IF: 3.2

2023-10-19

Energies

Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

energy & fuels
Electrified methane reforming: A compact approach to greener industrial hydrogen production

Kim Aasberg-Petersen,Cathrine Frandsen,Ib Chorkendorff,Sebastian T. Wismann,Jakob S. Engbæk,Søren B. Vendelbo,Flemming B. Bendixen,Winnie L. Eriksen,Peter M. Mortensen

DOI: https://doi.org/10.1126/science.aaw8775

IF: 56.9

2019-05-24

Science

Abstract:More-efficient heating Large-scale production of hydrogen through steam reforming directly produces CO 2 as a side product. In addition, the heating of reactors through fossil-fuel burning contributes further CO 2 emissions. One problem is that the catalyst bed is heated unevenly, which renders much of the catalyst effectively inactive. Wismann et al. describe an electrical heating scheme for a metal tube reactor that improves the uniformity of heating and catalyst usage (see the Perspective by Van Geem et al. ). Adoption of this alternative approach could affect CO 2 emissions by up to approximately 1% of global emissions. Science , this issue p. 756 ; see also p. 734

multidisciplinary sciences
Electrochemical Water Splitting for Scale Hydrogen Production: From the Laboratory to Industrial Applications

Rongrong Deng,Bo Zhang,Qibo Zhang

DOI: https://doi.org/10.1002/cctc.202301165

IF: 4.5

2024-01-22

ChemCatChem

Abstract:Hydrogen energy is an important carrier for global energy transformation and development due to its advantages of rich sources, green and carbon‐free, and wide application. The generation of clean hydrogen can be achieved through electrochemical water splitting driven by renewable energy, which has gained wide attention, but its large‐scale industrial application still faces challenges. This review summarizes the research status and bottleneck of industrial hydrogen production via electrolysis in developing electrocatalysts and optimizing electrolytic systems. It highlights that the deviation of electrocatalysts developed in the laboratory and their industrial application in the working environment and evaluation indicators should be corrected. With the aim to achieve low‐cost and sustainability in the production of high‐performance electrocatalysts, it is necessary to combine the material recycling from solid waste with the recyclable design of electrocatalysts. In addition, the future design of hybrid water electrolysis with low energy consumption and the ecological cycle issues that should be addressed in the industrial water electrolysis system are discussed.

chemistry, physical
CFD Simulation of Hydrogen Generation and Methane Combustion Inside a Water Splitting Membrane Reactor

Te Zhao,Chusheng Chen,Hong Ye

DOI: https://doi.org/10.3390/en14217175

IF: 3.2

2021-11-01

Energies

Abstract:Hydrogen production from water splitting remains difficult due to the low equilibrium constant (e.g., Kp ≈ 2 × 10−8 at 900 °C). The coupling of methane combustion with water splitting in an oxygen transport membrane reactor can shift the water splitting equilibrium toward dissociation by instantaneously removing O2 from the product, enabling the continuous process of water splitting and continuous generation of hydrogen, and the heat required for water splitting can be largely compensated for by methane combustion. In this work, a CFD simulation model for the coupled membrane reactor was developed and validated. The effects of the sweep gas flow rate, methane content and inlet temperature on the reactor performance were investigated. It was found that coupling of methane combustion with water splitting could significantly improve the hydrogen generation capacity of the membrane reactor. Under certain conditions, the average hydrogen yield with methane combustion could increase threefold compared to methods that used no coupling of combustion. The methane conversion decreases while the hydrogen yield increases with the increase in sweep gas flow rate or methane content. Excessive methane is required to ensure the hydrogen yield of the reactor. Increasing the inlet temperature can increase the membrane temperature, methane conversion, oxygen permeation rate and hydrogen yield.

energy & fuels
A membrane-based seawater electrolyser for hydrogen generation

Heping Xie,Zhiyu Zhao,Tao Liu,Yifan Wu,Cheng Lan,Wenchuan Jiang,Liangyu Zhu,Yunpeng Wang,Dongsheng Yang,Zongping Shao

DOI: https://doi.org/10.1038/s41586-022-05379-5

IF: 64.8

2022-12-01

Nature

Abstract:Electrochemical saline water electrolysis using renewable energy as input is a highly desirable and sustainable method for the mass production of green hydrogen 1,2,3,4,5,6,7 ; however, its practical viability is seriously challenged by insufficient durability because of the electrode side reactions and corrosion issues arising from the complex components of seawater. Although catalyst engineering using polyanion coatings to suppress corrosion by chloride ions or creating highly selective electrocatalysts has been extensively exploited with modest success, it is still far from satisfactory for practical applications 8,9,10,11,12,13,14 . Indirect seawater splitting by using a pre-desalination process can avoid side-reaction and corrosion problems 15,16,17,18,19,20,21 , but it requires additional energy input, making it economically less attractive. In addition, the independent bulky desalination system makes seawater electrolysis systems less flexible in terms of size. Here we propose a direct seawater electrolysis method for hydrogen production that radically addresses the side-reaction and corrosion problems. A demonstration system was stably operated at a current density of 250 milliamperes per square centimetre for over 3,200 hours under practical application conditions without failure. This strategy realizes efficient, size-flexible and scalable direct seawater electrolysis in a way similar to freshwater splitting without a notable increase in operation cost, and has high potential for practical application. Importantly, this configuration and mechanism promises further applications in simultaneous water-based effluent treatment and resource recovery and hydrogen generation in one step.

multidisciplinary sciences

Organising dietary education in a general practice setting.

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Low-carbon hydrogen production via molten salt methane pyrolysis with chemical looping combustion: Emission reduction potential and techno-economic assessment

Bounded Depth Broadcasting

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Electrolytic Methane Production from Reactive Carbon Solutions

Critical insights into eutectic molten hydroxide electrolysis for sustainable green hydrogen production

Water-Dissociation-Assisted Electrolysis for Hydrogen Production in a Salinity Power Cell

Use of an Intermediate Solid-State Electrode to Enable Efficient Hydrogen Production from Dilute Organic Matter

Electrified methane steam reforming on a washcoated SiSiC foam for low‐carbon hydrogen production

Energy, environment, and economic analyses on a novel hydrogen production method by electrified steam methane reforming with renewable energy accommodation

Production of Sustainable Methane from Renewable Energy and Captured Carbon Dioxide with the Use of Solid Oxide Electrolyzer: A Thermodynamic Assessment

Hydrogen Sulfide Splitting into Hydrogen and Sulfur through Off-Field Electrocatalysis

[The schizophrenia concept].

Electrocatalytic Water Splitting: From Harsh and Mild Conditions to Natural Seawater

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Electrified methane reforming: A compact approach to greener industrial hydrogen production

Electrochemical Water Splitting for Scale Hydrogen Production: From the Laboratory to Industrial Applications

CFD Simulation of Hydrogen Generation and Methane Combustion Inside a Water Splitting Membrane Reactor

A membrane-based seawater electrolyser for hydrogen generation