Abstract:High ionic conductivity in low-cost semiconductor oxides is essential to develop electrochemical energy devices for practical applications. These materials exhibit fast protonic or oxygen-ion transport in oxide materials by structural doping, but their application to solid oxide fuel cells (SOFCs) has remained a significant challenge. In this work, we have successfully synthesized nanostructured monoclinic WO3 through three steps: co-precipitation, hydrothermal, and dry freezing methods. The resulting WO3 exhibited good ionic conductivity of 6.12 × 10−2 S cm−1 and reached an excellent power density of 418 mW cm−2 at 550 °C using as an electrolyte in SOFC. To achieve such a high ionic conductivity and fuel cell performance without any doping contents was surprising, as there should not be any possibility of oxygen vacancies through the bulk structure for the ionic transport. Therefore, laterally we found that the surface layer of WO3 is reduced to oxygen-deficient when exposed to a reducing atmosphere and form WO3−δ/WO3 heterostructure, which reveals a unique ionic transport mechanism. Different microscopic and spectroscopic methods such as HR-TEM, SEM, EIS, Raman, UV-visible, XPS, and ESR spectroscopy were applied to investigate the structural, morphological, and electrochemical properties of WO3 electrolyte. The structural stability of the WO3 is explained by less dispersion between the valence and conduction bands of WO3−δ/WO3, which in turn could prevent current leakage in the fuel cell that is essential to reach high performance. This work provides some new insights for designing high-ion conducting electrolyte materials for energy storage and conversion devices.

The synthesis, characterization and electrochemical study of zirconia oxide nanoparticles for fuel cell application

Preparation of a high surface area zirconium oxide for fuel cell application

Continuous Hydrothermal Flow Syntheses of Nanosized Energy Materials Used in Solid Oxide Fuel Cells

Novel Co-precipitation method to synthesize NiO-YSZ nanocomposite powder for solid oxide fuel cell

Understanding the Phase Formation and Compositions of Barium Carbonate Modified Nio-Yttria Stabilized Zirconia for Fuel Cell Applications

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

The proton conductivity and mechanical properties of Nafion®/ ZrP nanocomposite membrane

Enhanced Activities of Nano-Ceo2−δ@430l Composites by Zirconium Doping for Hydrogen Electro-Oxidation in Solid Oxide Fuel Cells

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

Ionic Conductivity of Electrolytes Composed of Oleate-Capped Yttria-Stabilized Zirconia Nanoparticles

Synthesis, Characterization and Electrochemical Properties of Mesoporous Zirconia Nanomaterials Prepared by Self-Assembling Sol–gel Method with Tween 20 As a Template

Preparation of Yttria Stabilized Zirconia Powders with a Glycine-Nitrate Process for Intermediate-Temperature Solid Oxide Fuel Cells

The Detection of Monoclinic Zirconia and Non-Uniform 3D Crystallographic Strain in a Re-Oxidized Ni-YSZ Solid Oxide Fuel Cell Anode

Preparation and characterization of nano-tube and nano-rod structured La0.8Sr0.2MnO3-δ/Zr0.92Y 0.08O2 composite cathodes for solid oxide fuel cells

Nanocrystalline Surface Layer of WO3 for Enhanced Proton Transport during Fuel Cell Operation

Preparation of mesoporous and macroporous materials for solid oxide fuel cells

Facile Synthesis and Characterization of ZrO₂ Nanoparticles via Modified Co-Precipitation Method

Solvothermal Synthesis of Zirconia Nanomaterials: Latest Developments and Future

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Preparation and Characterization of One-Dimensional Nano-Structured Composite Cathodes for Solid Oxide Fuel Cells

Fabrication and Evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ Co-Impregnated Yttria-Stabilized Zirconia Anode for Single-Chamber Solid Oxide Fuel Cells