Abstract:Multifunctional nanoarchitecture (MNA) on catalysts has attracted great attention because of its capability to improve the performance, durability, and resistance to unwanted side reactions. Such structures, however, are conventionally prepared by deposition methods, which inherently suffer from costly and time-consuming drawbacks. Here, we report a simple one-step process to successfully construct a novel MNA with core–shell nanoparticles anchored at the heterointerface of dual-phase oxide substrates through a phase transition and in situ exsolution of perovskite La0.5Sr0.5Fe0.8Ni0.1Nb0.1O3−δ (LSFNNb0.1) in wet H2 (3% H2O) at 800 °C. The core–shell nanoparticles are composed of a Ni–Fe alloy core and a SrLaFeO4-type layered perovskite oxide shell (RP—Ruddlesden–Popper-layered perovskites), which synergistically improves the electrochemical activity and effectively suppresses aggregation and coarsening of the metallic core. The RP phase also covers the surface of perovskite bulk (SP—single perovskite), forming the heterointerface and preventing further decomposition of the SP phase. The RP/SP heterointerface may improve the kinetics of surface exchange of oxygen species, resulting in the enhancement of performance and durability of the reduced LSFNNb0.1 as an anode for solid oxide fuel cells (SOFCs). A doped zirconia electrolyte-supported single cell with the anode achieves the maximum power density (MPD) of 0.83 W cm–2 at 800 °C in wet H2, and the corresponding polarization resistance is as low as 0.15 Ω cm2. This work reveals the formation mechanism of the MNA by investigating the evolution of the crystal structure, composition and morphology of LSFNNb0.1, when changing reducing temperature and time in wet H2 and 5% H2-Ar. The oxygen vacancies and phase transitions are found to play important roles in the formation of the MNA. The construction of MNAs in one step opens a new opportunity to design and prepare high-performance and stable catalysts for applications in energy conversion and storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08016?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08016</a>.XRD patterns of LSFNNb0.1 powders reduced at 900 °C, Rp and Rohm of full cells with R-LSFNNb0.1 and R-LSFN anodes; Rp of SOFCs with various anodes, SEM images of LSFNNb0.1 reduced in wet H2; SEM images of LSFNNb0.1 reduced in 5% H2–Ar; relationship of particle size and particle density of LSFNNb0.1 with annealing time; XRD patterns of LSFNNb0.1 powders reduced in 5% H2–Ar at 800 °C for various periods; TEM image of LSFNNb0.1 powder reduced in 5% H2–Ar (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08016/suppl_file/am0c08016_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Continuous Hydrothermal Flow Syntheses of Nanosized Energy Materials Used in Solid Oxide Fuel Cells

Direct Syntheses of Mixed Ion and Electronic Conductors La<sub>4</sub>Ni<sub>3</sub>O<sub>10</sub>and La<sub>3</sub>Ni<sub>2</sub>O<sub>7</sub>from Nanosized Coprecipitates

Highly conductive low nickel content nano-composite dense cermets from nano-powders made via a continuous hydrothermal synthesis route

Direct Continuous Hydrothermal Synthesis of High Surface Area Nanosized Titania

Impact of cation redox chemistry on continuous hydrothermal synthesis of 2D-Ni(Co/Fe) hydroxides

In Situ Phase‐Transformation Forming a Bicontinuous (Ni, Co, Ti, and Al)‐Oxide/Li2CO3 Interpenetrating Network Electrolyte for Solid Oxide Fuel Cells

Nanocomposite YSZ-NiO Particles with Tailored Structure Synthesized in a Two-Stage Continuous Hydrothermal Flow Reactor

Construction of Multifunctional Nanoarchitectures in One Step on a Composite Fuel Catalyst through In Situ Exsolution of La 0.5 Sr 0.5 Fe 0.8 Ni 0.1 Nb 0.1 O 3−δ

Fabrication and Performance of La0.6sr0.4co0.2fe0.8o3-Delta Infiltrated-Yttria-Stabilized Zirconia Cathode on Anode-Supported Solid Oxide Fuel Cell

Solvothermal Synthesis of PtNi Nanoparticle Thin Film Cathode with Superior Thermal Stability for Low Temperature Solid Oxide Fuel Cells

Electrospun Fabrication of Nanofibers As High-Performance Cathodes of Solid Oxide Fuel Cells

Preparation and Characterization of Multielement Composite Oxide Nanomaterials Containing Ce, Zr, Y, and Yb via Continuous Hydrothermal Flow Synthesis

Conformal Electrocatalytic Surface Nanoionics for Accelerating High-Temperature Electrochemical Reactions in Solid Oxide Fuel Cells

In-Situ Formation of Nano-Structured Cathode on Metal Supported SOFC

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Infiltration of La0·6Sr0·4FeO3-δ Nanoparticles into YSZ Scaffold for Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Continuous Syntheses of Highly Dispersed Composite Nanocatalysts Via Simultaneous Co-Precipitation in Supercritical Water

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell