Abstract:Nano-porous silica aerogels are unique materials often having a high specific surface area, a high porosity (75-99%), a low thermal conductivity (0.01-0.03W/mK), and a low index of refraction. Because of their unique properties, aerogels have been extensively studied, not only for use as transparent thermal insulators but also as inter-metal dielectric materials, optical and acoustic applications, and the space industry (Muller et.al, 1999; Hrubesh et.al, 2001;Kim & Hyun,2003;Lu et.al,1991). NASA has applied aerogel on the Mars Pathfinder Sojourner rover and Mars Exploration rovers for insulation purposes. Additional applications of aerogels are found in battery electrodes, catalysts and electronic devices (Fricke et.al, 1992; Fricke & Tillotson, 1997; Kuhn et.al, 1995; Chadwick et.al, 2001). Currently SiO2, Al2O3 and C aerogels are reported and available elsewhere. During the production of aerogel a wet gel is formed which dried becomes filled with air. An aerogel is made up of microscopic beads or strand chains connected to form a continuous network, it is considered a solid. The fact that typical aerogels have more than 90% porosity gives them unusual characteristics (Yoda et.al, 1998; Klementiev, 2001). Their structure is composed of a 3D connected network of channels made of thin ligaments. The thickness of ligaments determines the final density and porosity of the aerogel (Reim et al, 2004; Kwon & Choi, 2000). As for thermal insulation application, generally monolithic SiO2 aerogels provide a whole low thermal conductivity due to its extremely high porosity. The thermal conductivity of aerogels is about 100 times smaller than that of full density silica glass, although Kistler made initial thermal conductivity measurements, a detailed understanding of thermal transport in aerogel resulted from investigations carried out (Fricke & Tillotson, 1997). Thermal transport in aerogel occurs via gaseous conductivity, solid conductivity and infrared radiative transfer. Usually at room temperature, aerogels have a low thermal conductivity due to its special gas conduction and solid conduction. However, at higher temperatures, radiative absorption/emission becomes the dominant heat transfer mechanism. Monolithic aerogel behaves poor thermal insulation because it is highly transparent in the 3– 8μm wavelength region. To improve its thermal insulation capacity, approaches such as doping aerogel with carbon have been applied to minimize infrared radiation heat transfer. The specific extinction for C doped aerogels is drastically increased, especially in the 2 to

Effect of residual Na+ on the properties of aerogel prepared with sodium silicate via APD

Preparation of SiO2 aerogel by water glass: effect of different sodium removal methods on aerogel properties

Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Silica Nanowires Reinforced Self-Hydrophobic Silica Aerogel Derived from Crosslinking of Propyltriethoxysilane and Tetraethoxysilane

Synthesis of Al2O3-SiO2 aerogels with low thermal conductivity and high strength by methyltriethoxysilane as a silica precursor

Production of low-density sodium silicate-based hydrophobic silica aerogel beads by a novel fast gelation process and ambient pressure drying process

Preparation and Characterization of Composite SiO2 Aerogel by a Novel One-step Modified Process

Synthesis of sodium silicate-based hydrophilic silica aerogel beads with superior properties: Effect of heat-treatment

Microstructure and Properties of the Si3N4/silica Aerogel Composites Fabricated by the Sol–gel Method Via Ambient Pressure Drying

‘Seeded’ growth of silica aerogel by tetraethoxysilane and trimethylchlorosilane co-precursor method

Effect of different trimethyl silylating agents on the hydrophobic and physical properties of silica aerogels

Preparation and Thermo-Mechanical Properties of Modified Gelatin Reinforced SiO2 Aerogels

Influence of Hydrolysis Time on Properties of SiO2 Aerogels Prepared by Ambient Pressure Drying

Preparation of monolithic Al2O3–SiO2 aerogels with high-temperature resistance using boehmite nanorods

Synthesis and Textural Evolution of Mesoporous Si3N4 Aerogel with High Specific Surface Area and Excellent Thermal Insulation Property Via the Urea Assisted Sol-Gel Technique

Effect of Gelation Initiators on Microstructure and Thermal Stability of Y2O3-SiO2 Composite Aerogels

An Overview on Silica Aerogels Synthesized by Siloxane Co-precursors

Aerogel: a Potential Three-Dimensional Nanoporous Filler for Resins

Synthesis, Structural And Thermal Properties Of Nano- Porous Sio2-Based Aerogels