Abstract:A B S T R A C T Refractory tungsten (W) is notoriously brittle at room temperature, which restricts its workability and narrows the temperature range of critical applications. Here, we report a multi-scale microstructure modulation strategy to achieve an excellent combination of low-temperature ductility and high strength in bulk pure W. Through fast two-step low temperature sintering of the activated W powders and highenergy-rate forging treatments, unique hierarchical microstructures were constructed in pure W, including lamellar elongated matrix grains, with profuse interior fine sub-grains, and high density of mobile edge and mixed dislocations. At room temperature, the hierarchical structured bulk W exhibits a detectable tensile ductility and an ultimate tensile strength (UTS) of 1.35 GPa. The high strength can be maintained at elevated temperatures, i.e., UTS > 1.0 GPa at 200 degrees C; it also has a remarkable tensile ductility of 15.3% at this temperature. These properties are significantly better than those reported in bulk pure W and W alloys with second phase particles. The shielding and blunting effects from low-angle grain boundaries and highly mobile dislocations, and the lamellar structure reaped delamination toughening effect are the main mechanisms for the improved low-temperature ductility and strength. This study demonstrates a practical route to achieve attractive low-temperature strength-ductility synergy in bulk W without involving any alloying elements, and it is a feasible and low-cost pathway to design high performance refractory metals and alloys.(c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Room temperature ductile W-Y2O3 alloy with high thermal shock resistance

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Thermal Shock Resistance of Nanocrystalline and Ultrafine-Grained W-Y2O3-Ti Alloys

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Thermal Shock Behavior of W-0.5 Wt% Y 2 O 3 Alloy Prepared Via a Novel Chemical Method

Preparation and Thermal Shock Characterization of Yttrium Doped Tungsten-Potassium Alloy

DBTT and tensile properties of as-sintered tungsten alloys reinforced by yttrium-zirconium oxide

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

High-temperature tensile and thermal shock characterization of low-temperature rolled tungsten

Annealing Characteristics and Mechanism Interpretation of High-Performance Swaged W-Y2O3 Alloy

Hierarchical Microstructures Enabled Excellent Low-Temperature Strength-Ductility Synergy in Bulk Pure Tungsten

Microstructures and properties of nanocrystalline W-based alloys produced by resistance sintering under ultrahigh pressure

Microstructure and High-Temperature Ablation Behaviour of Hafnium-Doped Tungsten-Yttrium Alloys

High Temperature Tensile Properties and Fracture Behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb Alloy

Establishment of processing map, microstructure and high-temperature tensile properties of W-0.25 wt% Al2O3 alloys

Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

High Thermal Shock Resistance of the Hot Rolled and Swaged Bulk W–ZrC Alloys

Exceptional Low Temperature Fabrication of Self-Passivating Tungsten Alloys by Mechanical Alloying and Spark Plasma Sintering

Ultrafine-grained W-based alloys prepared by HIP with ultrahigh hardness and excellent thermal stability