Abstract:The high brittle-to-ductile transition temperature (DBTT) of tungsten is a significant concern that hinders its use as a structural material. This study employs small punch testing over a broad temperature range to investigate the anisotropic mechanism of DBTT in as-hot rolled W-2%wt Y2O3 specimens. RD-TD specimen exhibits the highest EUS(0.75/J), highest ELS(0.08/J) and lowest TSP (∼336 °C) in three oriented materials. Multiple factors were conducted individually, revealing that the similar dislocation density, and fraction of LAGBs are not the primary determinant of the observed variations in DBTT performance. RD-TD specimen with strong {111}<112> γ-fiber texture exhibits the highest Fm that is nearly twice as high as that of RD-ND specimen and almost three times as high as that of TD-ND specimen. The relationship between the grain morphology, such as aspect ratio present on the DBTT as well as fracture mode of the material is apparent. RD-TD specimen boasts superior plastic properties, which displays an annular crack with the dome-like structure at the core and small incisions at the periphery. While, the plasticity of TD-ND and RD-ND specimens are deemed inadequate, as evidenced by the emergence of multiple lengthy and linear cracks in a particular orientation upon initial cracking. The utilization of numerous superimposed loads and the sandwich configuration of Y2O3 particles in tungsten matrix have been discovered to promote the occurrence of delamination in the thickness direction of the RD-TD specimens. The stratified structure, texture, screw dislocations, and grain aspect ratio have been identified as the pivotal factors influencing the anisotropy on DBTT and fracture analysis.

DBTT and tensile properties of as-sintered tungsten alloys reinforced by yttrium-zirconium oxide

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Effect of different crystal forms of ZrO 2 on the microstructure and properties of tungsten alloys

Effect of Anisotropic Mechanism of W-2%wt Y2O3 Alloy on DBTT and Fracture Analysis under Small Punch Testing

Mechanical Properties and Thermal Stability of W-ZrC/HfC-Re Alloys Fabricated by Spark Plasma Sintering

Mechanical Properties and Microstructures of W–TiC and W–Y2O3 Alloys Fabricated by Hot-Pressing Sintering

Microstructure characterization and properties of YSZ particles doped tungsten alloy prepared by liquid phase method

Tensile fracture behavior and texture evolution of a hot-rolled W-Y<sub>2</sub>(Zr)O<sub>3</sub> alloy

Tensile fracture behavior and texture evolution of a hot-rolled W–Y2(Zr)O3 alloy

High temperature tensile properties of 30 vol. pct ZrCp/W composite

Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method

Room temperature ductile W-Y2O3 alloy with high thermal shock resistance

Effect of Yttrium on Microstructure and Mechanical Properties of ZAlSi7Mg Alloy

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Evaluation of tensile property and strengthening mechanism of Zirconia reinforced molybdenum alloy

Microstructure and mechanical properties of Y2O3 reinforced Ti6Al4V composites fabricated by spark plasma sintering

The Effects of Yttrium Element on Microstructure and Mechanical Properties of Mg–5 Wt.% Zn–2 Wt.% Al Alloy

Fabrication and Stability of Ultrafine ZrC Nanoparticles Dispersion Strengthened Sub-Micrometer Grained W Alloy

Improving Tension/Compression Asymmetry of a Hot‐Extruded Mg–Zn–Y–Zr Alloy Via Yttrium Addition

First-principles Calculations of Mechanical and Thermodynamic Properties of Tungsten-Based Alloy