Abstract:Cu(In,Ga)Se<sub>2</sub> (CIGS) solar cells attract intense interest both in research and industry fields due to their high power conversion efficiencies, low costs, and high stabilities. The power conversion efficiency of a CIGS solar cell is limited by the deep level defects distributed on the surface and in the bulk of the CIGS solar cells. In this work, we elucidate that the deep level defects are significantly suppressed during the CdS buffer layer deposition process via a chemical bath deposition (CBD) method. The X-ray photoelectron spectroscopy results show the incorporation of cadmium (Cd) into CIGS during the CdS deposition process, which is the main reason for the reduced deep level nonradiative recombination defects. Raman spectroscopy and secondary ion mass spectroscopy further reveal the reduction of nonradiative recombination deep level defects due to Cd incorporation. Besides, the high-resistivity i-ZnO layer provides field-effect passivation, leading to the enhancement of the power conversion efficiency from 11.0 to 12.1%. By a combination of the incorporation of Cd, i-ZnO passivation, and optimization of the band gap of CIGS, the champion power conversion efficiency of the CIGS solar cell is as high as 15.5% without an antireflective layer and alkali metal postdeposition treatment. Our results provide insights into the effect of the CdS buffer layer, CBD method, and high-resistivity i-ZnO layer on the performance of CIGS solar cells, which is quite helpful to further improve the power conversion efficiency of CIGS solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01930</a>.CIGS coevaporation deposition process; CdS CBD deposition; characterizations; top-view SEM images of CdS deposited via chemical bath deposition for different times; XRD pattern of CdS fabricated via a CBD method at 80 °C for 12 min; parameters for the simulations of the performance of CIGS solar cells with different thicknesses of i-ZnO; and EQE curves of CIGS solar cell obtained at 0, 0.5, −0.5, and 1 V DC voltage bias (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01930/suppl_file/ae0c01930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improvement of the Electrical Properties of a Cu(In,Ga)Se₂ Solar Cell Based on a ZnS Buffer Layer from Radio Frequency Magnetron Sputtering

High-Efficiency Cu(In,Ga)Se₂ Thin Film Solar Cells Using ZnS and CdS Buffer Layers

Improvement of the CIGS solar cell performance: structure based on a ZnS buffer layer

Enhanced Efficiency of Cu(In,Ga)Se 2 Solar Cells With a Thin CdS Buffer Layer Via a Zn 0.8 Mg 0.2 O Second Buffer Layer

Optical Properties of Cd1−xZnxS Thin Films for CuInGaSe2 Solar Cell Application

Tuning the band gap of the CIGS solar buffer layer Cd1−xZnxS (x=0–1) to achieve high efficiency

Electrical barriers and their elimination by tuning (Zn,Mg)O composition in Cu(In,Ga)S2: Systematic approach to achieve over 14% power conversion efficiency

Atomic-Scale Interface Modification Improves the Performance of Cu(In1- xGax)Se2/Zn(O,S) Heterojunction Solar Cells

Investigation of Cu2ZnSnS4 thin film with preannealing process and ZnS buffer layer prepared by magnetron sputtering deposition

Enhancement of Cd-Free All-Dry-Processed Cu(In1-x,Gax)Se2 Thin-Film Solar Cells by Simultaneous Adoption of an Enlarged Bandgap Absorber and Tunable Bandgap Zn1-xMgxO Buffer

Effect of Zn(S,O,OH) Buffer Thin Films Formed on CIGS Through Different Stages and Reaction Processes in Chemical Bath Deposition: Interpretations from Mechanisms and Transformation Kinetics Perspective

Growth of Zn doped Cu(In, Ga)Se 2 thin films by RF sputtering for solar cell applications

Heterojunction Interface Passivation Strategy for Cu(In1-x,Gax)Se2 Solar Cell with Nano-Level Engineering of Zn-based Buffer Structure Via Atomic Layer Deposition Method

Study on the Performance of Oxygen-Rich Zn(O,S) Buffers Fabricated by Sputtering Deposition and Zn(O,S)/Cu(In,Ga)(S,Se) 2 Interfaces

13.6%-Efficient Cu(In,Ga)Se-2 Solar Cell with Absorber Fabricated by Rf Sputtering of (In,ga)(2)se-3 and Cu Se Targets

Influence of Sulfur Content in Zn(O,S) Buffer Layer onto Copper Indium Gallium Sulfur-Based Solar Cells Through Surface Engineering at ZnO1−xSx/CIGS Interface

Mechanism‐Based Approach of CdS/Cu(In,Ga)Se2 (CIGS) Interfaces for CIGS Solar Cells Through Deposition in Different Stages of Continuous Chemical Bath Deposition Reaction: Key to Achieving High Photovoltaic Performance

Cu(In,Ga)Se2 Solar Cells with Double Layered Buffers Grown by Chemical Bath Deposition

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

Pulsed Laser Deposition Zns Buffer Layers for Cigs Solar Cells

Efficiency Enhancement of CIGS Solar Cells via Recombination Passivation