Abstract:In the trend of integration of structure and function, novel thermal management materials are urgent to be developed owning good mechanical properties as well as excellent thermal properties. In this work, a complete and dense copper (Cu) coating with a thickness of 400 nm was deposited on the surfaces of graphite films (GFs) by ultrasonic-assisted electroless plating, which can improve the surface roughness of GFs and interfacial bonding between GFs and Cu foils. Cu-coated and uncoated GFs reinforced copper matrix laminated composites (noted as GFs(Cu)/Cu and GFs/Cu) were fabricated by optimized vacuum hot-pressing sintering. Based on the scratch test and microstructures of GFs(Cu) and GFs(Cu)/Cu composites, addition of Cu coating can improve the interfacial adhesion and element diffusion behavior, and intuitively explains the mechanical interlocking effect at the C-Cu interface. On basis of the nanoindentation mechanical properties across GFs(Cu)/Cu and GFs/Cu interfaces, the interfacial transition region with Cu coating of similar to 3 mu m is three times of that without Cu coating. Flexural strength of 27.6 vol% GFs(Cu)/Cu laminated composite is 45.9 MPa, which is 56% higher than that of the corresponding GFs/Cu laminated composite. In-plane thermal conductivity (TC) and out-of-plane coefficient of thermal expansion (CTE) of 69.4 vol % GFs(Cu)/Cu laminated composite are 1177.8 W/mK and -2.5 ppm/K respectively, which could be explained on the theoretical calculations and interfacial structures. In conclusion, the Cu coating on surfaces of GFs can generally improve the interfacial bonding, mechanical properties and thermal properties of GFs(Cu)/Cu laminated composites. It provides an effective way to develop novel structural and functional materials for thermal management.

Al₂O₃-Cu Substrate with Co-Continuous Phases Made by Powder Sintering Process

Sintering Densification of Cu/Al2O3p Nano-Composite Powders by Electroless Copper Plating

Study of Hot-press Sintering Process of Nanometer Cu-Al_2O_3 Composite

Fabrication and Thermal Properties of Hot Press Sintered Cr-coated Carbon Fiber/cu Composites

Effect of Sintering Process on Conductivity and Mechanical Properties of In-situ Formed Mo2 C/Cu-based Composite

Thermal Sintering Matchability Between Low‐Temperature Cofired Ceramic Substrate and Silver Pastes and the Effect of CuO on Silver Diffusion Inhibition

Fabrication, Mechanical and Thermal Properties of Copper Coated Graphite Films Reinforced Copper Matrix Laminated Composites Via Ultrasonic-Assisted Electroless Plating and Vacuum Hot-Pressing Sintering

Thermal Sintering Matchability between LTCC Substrate and Silver Pastes and the Effect of CuO on Silver Diffusion Inhibition

Powder metallurgy process enables production of high-strength conductive Cu-based composites reinforced by Cu50Zr43Al7 metallic glass

Effects of Zr-Cu Alloy Powder on Microstructure and Properties of Cu Matrix Composite with Highly-Aligned Flake Graphite

Co-continuous Al/Al2O3 composite produced by liquid displacement reaction: Relationship between microstructure and mechanical behavior

Processing copper and silver matrix composites by electroless plating and hot pressing

Microstructures and Mechanical Properties of Cf/ZrB2-SiC Composite Fabricated by Nano Slurry Brushing Combined with Low-Temperature Hot Pressing

Fabrication of Al 2 O 3 –mullite–aln Multiphase Ceramic Layer on W–Cu Substrates for Power Semiconductor Packaging

Submicron Cu@glass core-shell powders for the preparation of conductive thick films on ceramic substrates

The Sintering Properties and Interfacial Investigation of Barium Ferrite and Ceramic Cofiring System for the Application of Ltcc Technology

Enhanced interfacial wettability and mechanical properties of Ni@Al2O3/Cu ceramic matrix composites using spark plasma sintering of Ni coated Al2O3 powders

The Mechanical Properties of Co-Continuous Si3N4/Al Composites Manufactured by Squeeze Casting

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Structure and properties of alumina-reinforced copper matrix composites prepared by powder metallurgy at different sintering temperatures

Microstructural, Mechanical, and Tribological Characteristics of Ceramic Reinforced Al/Cu Hybrid Matrix Composites